This attribute is the PLC's end point address in the format of an
NSAP address. As such it must consist of a string of hex digits
although not all 40 digits must be specified. LocalAddress must
share a prefix with MOD nodePrefix or one of MOD
alternatePorsPrefixes for this node, otherwise PORS will not be able
to route calls to this service. LocalAddress is used in conjunction
with addressToCall. That is, the end responsible for originating
calls must have addressToCall provisioned, while the end
responsible for terminationg calls must have localAddress
provisioned. In such a case, addressToCall on the originating end
must match exactly the localAddress of the terminating end. Note
that both ends may be originating and terminating at the same time.
That is, both ends may have addressToCall and localAddress
provisioned as long as addressToCall and localAddress on different
ends are identical.
Parsed from file nortelPC-bitTransparentV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
This attribute is the PLC's end point address in the format of an
NSAP address. As such it must consist of a string of hex digits
although not all 40 digits must be specified. LocalAddress must
share a prefix with MOD nodePrefix or one of MOD
alternatePorsPrefixes for this node, otherwise PORS will not be able
to route calls to this service. LocalAddress is used in conjunction
with addressToCall. That is, the end responsible for originating
calls must have addressToCall provisioned, while the end
responsible for terminationg calls must have localAddress
provisioned. In such a case, addressToCall on the originating end
must match exactly the localAddress of the terminating end. Note
that both ends may be originating and terminating at the same time.
That is, both ends may have addressToCall and localAddress
provisioned as long as addressToCall and localAddress on different
ends are identical.
Parsed from file Nortel-MsCarrier-MscPassport-BitTransparentMIB.mib
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-BitTransparentMIB
[Automatically extracted from oidview.com]
mscBtdsPlcLocalAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the PLC's end point address in the format of an NSAP address. As such it must consist of a string of hex digits although not all 40 digits must be specified. LocalAddress must share a prefix with MOD nodePrefix or one of MOD alternatePorsPrefixes for this node, otherwise PORS will not be able to route calls to this service. LocalAddress is used in conjunction with addressToCall. That is, the end responsible for originating calls must have addressToCall provisioned, while the end responsible for terminationg calls must have localAddress provisioned. In such a case, addressToCall on the originating end must match exactly the localAddress of the terminating end. Note that both ends may be originating and terminating at the same time. That is, both ends may have addressToCall and localAddress provisioned as long as addressToCall and localAddress on different ends are identical." DEFVAL { ''H } ::= { mscBtdsPlcProvEntry 21 }
mscBtdsPlcLocalAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the PLC's end point address in the format of an NSAP address. As such it must consist of a string of hex digits although not all 40 digits must be specified. LocalAddress must share a prefix with MOD nodePrefix or one of MOD alternatePorsPrefixes for this node, otherwise PORS will not be able to route calls to this service. LocalAddress is used in conjunction with addressToCall. That is, the end responsible for originating calls must have addressToCall provisioned, while the end responsible for terminationg calls must have localAddress provisioned. In such a case, addressToCall on the originating end must match exactly the localAddress of the terminating end. Note that both ends may be originating and terminating at the same time. That is, both ends may have addressToCall and localAddress provisioned as long as addressToCall and localAddress on different ends are identical." DEFVAL { ''H } ::= { mscBtdsPlcProvEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.2 | mscBtdsPlcRemoteName | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a Passport component name. The syntax of a component is:… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.3 | mscBtdsPlcSetupPriority | 0 | 0 | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.4 | mscBtdsPlcHoldingPriority | 0 | 0 | This attribute gives the priority that a path holds once it is established. Zero(0) is the highest priority and four(4) is the l… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.5 | mscBtdsPlcRequiredTxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route. This attribute re… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.6 | mscBtdsPlcRequiredRxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute repres… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.7 | mscBtdsPlcRequiredTrafficType | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight(8) possible traffic types, and the path … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.8 | mscBtdsPlcPermittedTrunkTypes | 0 | 0 | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.9 | mscBtdsPlcRequiredSecurity | 0 | 0 | This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.10 | mscBtdsPlcRequiredCustomerParm | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.11 | mscBtdsPlcPathAttributeToMinimize | 0 | 0 | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.12 | mscBtdsPlcMaximumAcceptableCost | 0 | 0 | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.13 | mscBtdsPlcMaximumAcceptableDelay | 0 | 0 | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It sh… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.14 | mscBtdsPlcEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.15 | mscBtdsPlcDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, a… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.16 | mscBtdsPlcPathType | 0 | 0 | mscBtdsPlcPathtype |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.17 | mscBtdsPlcPathFailureAction | 0 | 0 | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is sele… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.18 | mscBtdsPlcBumpPreference | 0 | 0 | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPri… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.19 | mscBtdsPlcOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.20 | mscBtdsPlcAddressToCall | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a NSAP address. As such it must consist of a string of h… |
| 1.3.6.1.4.1.562.36.2.1.81.3.10.1.22 | mscBtdsPlcMaximumAcceptableGatewayCost | 0 | 0 | This attribute indicates an upper bound on the gateway cost metric of a route, which is the sum of the gateway cost metrics of a… |