Setting this object will start the output after the
indicated number of seconds, including starting the
UPS, if necessary. Setting this object to 0 will
cause the startup to occur immediately. Setting this
object to -1 will abort the countdown. If the output
is already on at the time the countdown reaches 0,
then nothing will happen. Sets to this object
override the effect of any upsStartupAfterDelay
countdown or upsRebootWithDuration countdown in
progress. When read, upsStartupAfterDelay will return
the number of seconds until startup, or -1 if no
startup countdown is in effect. If the countdown
expires during a utility failure, the startup shall
not occur until the utility power is restored. On
some systems, if the agent is restarted while a
startup countdown is in effect, the countdown is
aborted.(*)
Parsed from file GE_PARALLELUPS.mib.txt
Company: ge
Module: GE_PARALLELUPS
Vendor: IMV Victron bv
Module: GE_PARALLELUPS
[Automatically extracted from oidview.com]
upsStartupAfterDelay_sixth OBJECT-TYPE SYNTAX Integer32 (-1..2147483648) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object will start the output after the indicated number of seconds, including starting the UPS, if necessary. Setting this object to 0 will cause the startup to occur immediately. Setting this object to -1 will abort the countdown. If the output is already on at the time the countdown reaches 0, then nothing will happen. Sets to this object override the effect of any upsStartupAfterDelay countdown or upsRebootWithDuration countdown in progress. When read, upsStartupAfterDelay will return the number of seconds until startup, or -1 if no startup countdown is in effect. If the countdown expires during a utility failure, the startup shall not occur until the utility power is restored. On some systems, if the agent is restarted while a startup countdown is in effect, the countdown is aborted.(*)" ::= { upsControl_sixth 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.16.8.3.0 | 0 | 0 | 0 | upsStartupAfterDelay_sixth |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.16.8.1 | upsShutdownType_sixth | 1 | 1 | This object determines the nature of the action to be taken at the time when the countdown of the upsShutdownAfterDelay and upsRe… |
| 1.3.6.1.4.1.818.1.1.16.8.2 | upsShutdownAfterDelay_sixth | 1 | 1 | Setting this object will shutdown (i.e., turn off) either the UPS output or the UPS system (as determined by the value of upsShut… |
| 1.3.6.1.4.1.818.1.1.16.8.4 | upsRebootWithDuration_sixth | 1 | 1 | Setting this object will immediately shutdown (i.e., turn off) either the UPS output or the UPS system (as determined by the valu… |
| 1.3.6.1.4.1.818.1.1.16.8.5 | upsAutoRestart_sixth | 1 | 1 | Setting this object to 'on' will cause the UPS system to restart after a shutdown if the shutdown occurred during a power loss as… |
| 1.3.6.1.4.1.818.1.1.16.8.6 | upsReceptaclesNum_sixth | 1 | 1 | The number of receptacles utilized in this device. This entry indicates the number of rows in the receptacle table. |
| 1.3.6.1.4.1.818.1.1.16.8.7 | upsReceptacleTable_sixth | 1 | 3 | A list of receptacle table entries. The number of entries is given by the value of upsReceptacleNum. |
| 1.3.6.1.4.1.818.1.1.16.8.8 | upsUPSMode_sixth | 1 | 1 | The operation mode off the UPS. Off-line indicates a mode in which the input power is transferred to the output directly or via a… |
| 1.3.6.1.4.1.818.1.1.16.8.9 | upsRectifierOnOff_sixth | 1 | 1 | The present state of the rectifier. Setting this object to 'on' will cause the rectifier to be turned on. Setting this object to … |
| 1.3.6.1.4.1.818.1.1.16.8.10 | upsBatteryChargeMethod_sixth | 1 | 1 | The present state of the charge method. Setting this object to 'Normal charge' will cause the battery to be charged using the nor… |
| 1.3.6.1.4.1.818.1.1.16.8.11 | upsInverterOnOff_sixth | 1 | 1 | The present state of the inverter. Setting this object to 'on' will cause the inverter to be turned on. Setting this object to 'o… |
| 1.3.6.1.4.1.818.1.1.16.8.12 | upsBypassOnOff_sixth | 1 | 1 | The present state of the bypass. Setting this object to 'on' will cause the bypass to be activated. Setting this object to 'off' … |
| 1.3.6.1.4.1.818.1.1.16.8.13 | upsLoadSource_sixth | 1 | 1 | The present source of the load. Setting this object to 'On bypass' will cause the load to be supplied by the bypass. Setting this … |