This feature in obsolete as of 08/17/2001.
Telnet 'trusted' address mask. See cpsmm100TntRIP.
This value can be used to exclude bit positions from
consideration when applying TntRIP (above) to a Telnet
connection request.
For each bit position in TntRIPMask that is a 1, the
corresponding bits in the TntRIP and the IP address of the
connecting client must be the same. If this is not true,
the connection attempt is ignored.
Note that the TntRIPMask differs from a true subnet
mask (which must have all '1' bits at the left and all '0'
bits at the right) in that it may use any bit pattern.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmm100TntRIPMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This feature in obsolete as of 08/17/2001. Telnet 'trusted' address mask. See cpsmm100TntRIP. This value can be used to exclude bit positions from consideration when applying TntRIP (above) to a Telnet connection request. For each bit position in TntRIPMask that is a 1, the corresponding bits in the TntRIP and the IP address of the connecting client must be the same. If this is not true, the connection attempt is ignored. Note that the TntRIPMask differs from a true subnet mask (which must have all '1' bits at the left and all '0' bits at the right) in that it may use any bit pattern." ::= { cpsmm100Entry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.1 | cpsmm100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.2 | cpsmm100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.3 | cpsmm100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.4 | cpsmm100Reset | 0 | 0 | Set this to reset(1) to cause the CPSMM100 to reboot. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.5 | cpsmm100SaveConfig | 0 | 0 | Set this to saveConfig(1) to force configuration changes made since the last saveConfig to be copied from RAM to flash memory. If… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.6 | cpsmm100HwRevision | 0 | 0 | The hardware revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.7 | cpsmm100SwRevision | 0 | 0 | The revision of the agent firmware for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.8 | cpsmm100IPAddress | 0 | 0 | The IP Address of the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.9 | cpsmm100SubnetMask | 0 | 0 | The subnet mask used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.10 | cpsmm100Gateway | 0 | 0 | The IP gateway used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.11 | cpsmm100IsPrimary | 0 | 0 | In a given Point System stack, multiple base management modules can be installed, but only one can be the Primary. The Primary is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.12 | cpsmm100WantPrimary | 0 | 0 | Normally, the Management Module installed in the cabinet with the lowest serial number (BIA) in the lowest (leftmost) slot that h… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.13 | cpsmm100CanPrimary | 0 | 0 | Value is yes(1) if this device is eligible to become the Primary Management Module. Currently, lack of IP/Ethernet connectivity i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.14 | cpsmm100EthernetLink | 0 | 0 | Does the management interface of this management module have ethernet link? |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.15 | cpsmm100TntRIP | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' IP address. Telnet access to the CPSMM100 can be limited to a single… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.17 | cpsmm100SNMPTrapMgr | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.18 | cpsmm100SNMPTrapInterval | 0 | 0 | For future expansion, not currently implemented. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.19 | cpsmm100SysUpTime | 0 | 0 | Mirror of this Management Module's system.sysUpTime.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.20 | cpsmm100SysContact | 0 | 0 | Mirror of this Management Module's system.sysContact.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.21 | cpsmm100SysName | 0 | 0 | Mirror of this Management Module's system.sysName.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.22 | cpsmm100SysLocation | 0 | 0 | Mirror of this Management Module's system.sysLocation.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.23 | cpsmm100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.24 | cpsmm100SerialNumber | 0 | 0 | The serial number of this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.25 | cpsmm100ICIF | 0 | 0 | Multiple Management Modules can be installed in a Point System stack. For each cabinet in the stack, exactly one module must be s… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.26 | cpsmm100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.27 | cpsmm100LastGasp | 0 | 0 | Last Gasp support for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.28 | cpsmm100SNMPTrapMgr2 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.29 | cpsmm100SNMPTrapMgr3 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.30 | cpsmm100SNMPTrapMgr4 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.31 | cpsmm100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |