When the value is clean(1)Device and Management Module
cache are synchronized, no automatic corrections to
configuration will occur. When the value is dirty(2)
Device and Management Module cache are not synchronized.
The configuration currently displayed by the application
has not been validated by the device. The device may
need to correct the configuration, in which case the
displayed configuration will change.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmm100CacheClean OBJECT-TYPE SYNTAX INTEGER { clean(1), dirty(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occur. When the value is dirty(2) Device and Management Module cache are not synchronized. The configuration currently displayed by the application has not been validated by the device. The device may need to correct the configuration, in which case the displayed configuration will change." ::= { cpsmm100Entry 31 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.1 | cpsmm100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.2 | cpsmm100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.3 | cpsmm100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.4 | cpsmm100Reset | 0 | 0 | Set this to reset(1) to cause the CPSMM100 to reboot. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.5 | cpsmm100SaveConfig | 0 | 0 | Set this to saveConfig(1) to force configuration changes made since the last saveConfig to be copied from RAM to flash memory. If… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.6 | cpsmm100HwRevision | 0 | 0 | The hardware revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.7 | cpsmm100SwRevision | 0 | 0 | The revision of the agent firmware for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.8 | cpsmm100IPAddress | 0 | 0 | The IP Address of the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.9 | cpsmm100SubnetMask | 0 | 0 | The subnet mask used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.10 | cpsmm100Gateway | 0 | 0 | The IP gateway used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.11 | cpsmm100IsPrimary | 0 | 0 | In a given Point System stack, multiple base management modules can be installed, but only one can be the Primary. The Primary is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.12 | cpsmm100WantPrimary | 0 | 0 | Normally, the Management Module installed in the cabinet with the lowest serial number (BIA) in the lowest (leftmost) slot that h… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.13 | cpsmm100CanPrimary | 0 | 0 | Value is yes(1) if this device is eligible to become the Primary Management Module. Currently, lack of IP/Ethernet connectivity i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.14 | cpsmm100EthernetLink | 0 | 0 | Does the management interface of this management module have ethernet link? |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.15 | cpsmm100TntRIP | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' IP address. Telnet access to the CPSMM100 can be limited to a single… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.16 | cpsmm100TntRIPMask | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' address mask. See cpsmm100TntRIP. This value can be used to exclude … |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.17 | cpsmm100SNMPTrapMgr | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.18 | cpsmm100SNMPTrapInterval | 0 | 0 | For future expansion, not currently implemented. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.19 | cpsmm100SysUpTime | 0 | 0 | Mirror of this Management Module's system.sysUpTime.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.20 | cpsmm100SysContact | 0 | 0 | Mirror of this Management Module's system.sysContact.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.21 | cpsmm100SysName | 0 | 0 | Mirror of this Management Module's system.sysName.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.22 | cpsmm100SysLocation | 0 | 0 | Mirror of this Management Module's system.sysLocation.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.23 | cpsmm100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.24 | cpsmm100SerialNumber | 0 | 0 | The serial number of this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.25 | cpsmm100ICIF | 0 | 0 | Multiple Management Modules can be installed in a Point System stack. For each cabinet in the stack, exactly one module must be s… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.26 | cpsmm100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.27 | cpsmm100LastGasp | 0 | 0 | Last Gasp support for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.28 | cpsmm100SNMPTrapMgr2 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.29 | cpsmm100SNMPTrapMgr3 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.30 | cpsmm100SNMPTrapMgr4 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |