Multiple Management Modules can be installed in a Point
System stack. For each cabinet in the stack, exactly one
module must be selected to communicate configuration
changes to the cabinet hardware and provide a
communications pathway to other cabinets. This module
is known as the Inter-Cabinet Communications Interface.
If there are any Base Management Modules in the cabinet,
the one in the lowest slot will be the ICIF. Otherwise,
it will be the Expansion Management Module in the lowest
slot.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmm100ICIF OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Multiple Management Modules can be installed in a Point System stack. For each cabinet in the stack, exactly one module must be selected to communicate configuration changes to the cabinet hardware and provide a communications pathway to other cabinets. This module is known as the Inter-Cabinet Communications Interface. If there are any Base Management Modules in the cabinet, the one in the lowest slot will be the ICIF. Otherwise, it will be the Expansion Management Module in the lowest slot." ::= { cpsmm100Entry 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.1 | cpsmm100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.2 | cpsmm100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.3 | cpsmm100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.4 | cpsmm100Reset | 0 | 0 | Set this to reset(1) to cause the CPSMM100 to reboot. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.5 | cpsmm100SaveConfig | 0 | 0 | Set this to saveConfig(1) to force configuration changes made since the last saveConfig to be copied from RAM to flash memory. If… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.6 | cpsmm100HwRevision | 0 | 0 | The hardware revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.7 | cpsmm100SwRevision | 0 | 0 | The revision of the agent firmware for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.8 | cpsmm100IPAddress | 0 | 0 | The IP Address of the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.9 | cpsmm100SubnetMask | 0 | 0 | The subnet mask used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.10 | cpsmm100Gateway | 0 | 0 | The IP gateway used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.11 | cpsmm100IsPrimary | 0 | 0 | In a given Point System stack, multiple base management modules can be installed, but only one can be the Primary. The Primary is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.12 | cpsmm100WantPrimary | 0 | 0 | Normally, the Management Module installed in the cabinet with the lowest serial number (BIA) in the lowest (leftmost) slot that h… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.13 | cpsmm100CanPrimary | 0 | 0 | Value is yes(1) if this device is eligible to become the Primary Management Module. Currently, lack of IP/Ethernet connectivity i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.14 | cpsmm100EthernetLink | 0 | 0 | Does the management interface of this management module have ethernet link? |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.15 | cpsmm100TntRIP | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' IP address. Telnet access to the CPSMM100 can be limited to a single… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.16 | cpsmm100TntRIPMask | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' address mask. See cpsmm100TntRIP. This value can be used to exclude … |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.17 | cpsmm100SNMPTrapMgr | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.18 | cpsmm100SNMPTrapInterval | 0 | 0 | For future expansion, not currently implemented. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.19 | cpsmm100SysUpTime | 0 | 0 | Mirror of this Management Module's system.sysUpTime.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.20 | cpsmm100SysContact | 0 | 0 | Mirror of this Management Module's system.sysContact.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.21 | cpsmm100SysName | 0 | 0 | Mirror of this Management Module's system.sysName.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.22 | cpsmm100SysLocation | 0 | 0 | Mirror of this Management Module's system.sysLocation.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.23 | cpsmm100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.24 | cpsmm100SerialNumber | 0 | 0 | The serial number of this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.26 | cpsmm100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.27 | cpsmm100LastGasp | 0 | 0 | Last Gasp support for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.28 | cpsmm100SNMPTrapMgr2 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.29 | cpsmm100SNMPTrapMgr3 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.30 | cpsmm100SNMPTrapMgr4 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.31 | cpsmm100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |