Set this to saveConfig(1) to force configuration changes
made since the last saveConfig to be copied from RAM to
flash memory. If changes are made to the configuration of
a CPSMM100 and SaveConfig is not subsequently set to 1,
the changes will be made only in RAM and the device will
revert to its previous configuration at the next reboot.
After the save completes, SaveConfig automatically reverts
to noSaveConfig(2).
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmm100SaveConfig OBJECT-TYPE SYNTAX INTEGER { saveConfig(1), noSaveConfig(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set this to saveConfig(1) to force configuration changes made since the last saveConfig to be copied from RAM to flash memory. If changes are made to the configuration of a CPSMM100 and SaveConfig is not subsequently set to 1, the changes will be made only in RAM and the device will revert to its previous configuration at the next reboot. After the save completes, SaveConfig automatically reverts to noSaveConfig(2)." ::= { cpsmm100Entry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.1 | cpsmm100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.2 | cpsmm100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.3 | cpsmm100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.4 | cpsmm100Reset | 0 | 0 | Set this to reset(1) to cause the CPSMM100 to reboot. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.6 | cpsmm100HwRevision | 0 | 0 | The hardware revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.7 | cpsmm100SwRevision | 0 | 0 | The revision of the agent firmware for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.8 | cpsmm100IPAddress | 0 | 0 | The IP Address of the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.9 | cpsmm100SubnetMask | 0 | 0 | The subnet mask used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.10 | cpsmm100Gateway | 0 | 0 | The IP gateway used by the Ethernet interface of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.11 | cpsmm100IsPrimary | 0 | 0 | In a given Point System stack, multiple base management modules can be installed, but only one can be the Primary. The Primary is… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.12 | cpsmm100WantPrimary | 0 | 0 | Normally, the Management Module installed in the cabinet with the lowest serial number (BIA) in the lowest (leftmost) slot that h… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.13 | cpsmm100CanPrimary | 0 | 0 | Value is yes(1) if this device is eligible to become the Primary Management Module. Currently, lack of IP/Ethernet connectivity i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.14 | cpsmm100EthernetLink | 0 | 0 | Does the management interface of this management module have ethernet link? |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.15 | cpsmm100TntRIP | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' IP address. Telnet access to the CPSMM100 can be limited to a single… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.16 | cpsmm100TntRIPMask | 0 | 0 | This feature in obsolete as of 08/17/2001. Telnet 'trusted' address mask. See cpsmm100TntRIP. This value can be used to exclude … |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.17 | cpsmm100SNMPTrapMgr | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.18 | cpsmm100SNMPTrapInterval | 0 | 0 | For future expansion, not currently implemented. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.19 | cpsmm100SysUpTime | 0 | 0 | Mirror of this Management Module's system.sysUpTime.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.20 | cpsmm100SysContact | 0 | 0 | Mirror of this Management Module's system.sysContact.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.21 | cpsmm100SysName | 0 | 0 | Mirror of this Management Module's system.sysName.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.22 | cpsmm100SysLocation | 0 | 0 | Mirror of this Management Module's system.sysLocation.0 |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.23 | cpsmm100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.24 | cpsmm100SerialNumber | 0 | 0 | The serial number of this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.25 | cpsmm100ICIF | 0 | 0 | Multiple Management Modules can be installed in a Point System stack. For each cabinet in the stack, exactly one module must be s… |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.26 | cpsmm100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.27 | cpsmm100LastGasp | 0 | 0 | Last Gasp support for this device. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.28 | cpsmm100SNMPTrapMgr2 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.29 | cpsmm100SNMPTrapMgr3 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.30 | cpsmm100SNMPTrapMgr4 | 0 | 0 | Traps generated by this management module will be sent to this IP address. |
| 1.3.6.1.4.1.868.2.4.1.2.2.1.1.31 | cpsmm100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |