Enable/Disable control for the advertising of Pause
capability on the copper interface. This MIB variable
is retained for compatibility with older applications
and firmware. If you have a current version of the
CGETF100 device (which supports asymmetric pause),
you should both read and write the MIB variable
cgetf100PauseType(21) for complete monitoring and
control of pause capability advertising. If you are
using a current Transition Networks application, this
is automatic.
On all versions of the CGETF100 device, this MIB variable
can be used to enable and disable advertising of symmetric
pause.
For current versions of the CGETF100, this variable reads
enabled(1) any time any type of pause is enabled, and
forces cgetf100PauseType(21) to symmetric(1) when changed
from disabled(2) to enabled(1).
On new versions of the CGETF100 device, when
cgetf100FiberAutoNegot(19) has the value enabled(1), this
variable takes on the read-only value enabled(1).
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgetf100Pause OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is retained for compatibility with older applications and firmware. If you have a current version of the CGETF100 device (which supports asymmetric pause), you should both read and write the MIB variable cgetf100PauseType(21) for complete monitoring and control of pause capability advertising. If you are using a current Transition Networks application, this is automatic. On all versions of the CGETF100 device, this MIB variable can be used to enable and disable advertising of symmetric pause. For current versions of the CGETF100, this variable reads enabled(1) any time any type of pause is enabled, and forces cgetf100PauseType(21) to symmetric(1) when changed from disabled(2) to enabled(1). On new versions of the CGETF100 device, when cgetf100FiberAutoNegot(19) has the value enabled(1), this variable takes on the read-only value enabled(1)." ::= { cgetf100Entry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.1 | cgetf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.2 | cgetf100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.3 | cgetf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.4 | cgetf100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.5 | cgetf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.6 | cgetf100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.7 | cgetf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.8 | cgetf100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.9 | cgetf100TPLink | 0 | 0 | Status of Twisted Pair Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.10 | cgetf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.11 | cgetf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.12 | cgetf100Enabled | 0 | 0 | When this variable is set to no(1), the device allows no traffic to pass. |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.14 | cgetf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.15 | cgetf100FullDuplex | 0 | 0 | Controls advertizing of duplex capability for the copper side of the converter. When set to fullDuplex(1), the converter advertiz… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.16 | cgetf100ClockMaster | 0 | 0 | When yes(1), the converter is supplying clock to the twisted pair. When no(2), the remote supplies the clock. |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.17 | cgetf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.18 | cgetf100TPLength | 0 | 0 | Twisted-pair length estimated via the converter's internal Time Domain Reflectometer. 1 means less than 50 meters, 2 means 50 to … |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.19 | cgetf100FiberAutoNegot | 0 | 0 | Fiber port autonegotiation configuration. |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.20 | cgetf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |
| 1.3.6.1.4.1.868.2.4.1.2.2.8.1.21 | cgetf100PauseType | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is only functional on C… |