Enable/Disable control for the advertising of Pause
capability on the copper interface. This MIB variable
is only functional on CGETF100 devices that support
asymmetric pause (i.e. current versions). If your
CGETF100 does not support asymmetric pause, this
variable will return the read-only value notApplicable(5)
regardless of any other factors.
On current CGETF100 devices, selectable values for this
variable are symmetric(1), asymRX(2) (asymmetric, pause
frames flow towards the converter), asymTX(3) (asymmetric,
pause frames flow towards the link partner), and
disabled(4).
Note: Changing cgetf100PauseType(21) to disabled(4) causes
cgetf100Pause(13) to take on the value disabled(2). Changing
cgetf100PauseType(21) to any selectable value other than
disabled(4) causes cgetf100Pause(13) to take on the value
enabled(1).
If cgetf100FiberAutoNegot(19) has the value enabled(1), then
this variable returns the read-only value all(10), which
indicates that all advertised modes received from the twisted
pair link partner are reflected back to the link partner.
Otherwise, if cgetf100ConfigMode(17) has the value hardware(2),
one of the following read-only values will be returned:
symmetricRO(6) or disabledRO(9). The read-only values asymRXRO(7)
and asymTXRO(8) are defined for future expansion.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgetf100PauseType OBJECT-TYPE SYNTAX INTEGER { symmetric(1), asymRX(2), asymTX(3), disabled(4), notApplicable(5), symmetricRO(6), asymRXRO(7), asymTXRO(8), disabledRO(9), all(10) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is only functional on CGETF100 devices that support asymmetric pause (i.e. current versions). If your CGETF100 does not support asymmetric pause, this variable will return the read-only value notApplicable(5) regardless of any other factors. On current CGETF100 devices, selectable values for this variable are symmetric(1), asymRX(2) (asymmetric, pause frames flow towards the converter), asymTX(3) (asymmetric, pause frames flow towards the link partner), and disabled(4). Note: Changing cgetf100PauseType(21) to disabled(4) causes cgetf100Pause(13) to take on the value disabled(2). Changing cgetf100PauseType(21) to any selectable value other than disabled(4) causes cgetf100Pause(13) to take on the value enabled(1). If cgetf100FiberAutoNegot(19) has the value enabled(1), then this variable returns the read-only value all(10), which indicates that all advertised modes received from the twisted pair link partner are reflected back to the link partner. Otherwise, if cgetf100ConfigMode(17) has the value hardware(2), one of the following read-only values will be returned: symmetricRO(6) or disabledRO(9). The read-only values asymRXRO(7) and asymTXRO(8) are defined for future expansion." ::= { cgetf100Entry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.8.1.1 | cgetf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.2 | cgetf100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.3 | cgetf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.4 | cgetf100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.5 | cgetf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.6 | cgetf100SerialNumber | 0 | 0 | The serial number of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.7 | cgetf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.8 | cgetf100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.9 | cgetf100TPLink | 0 | 0 | Status of Twisted Pair Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.10 | cgetf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.11 | cgetf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.12 | cgetf100Enabled | 0 | 0 | When this variable is set to no(1), the device allows no traffic to pass. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.13 | cgetf100Pause | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is retained for compat… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.14 | cgetf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.15 | cgetf100FullDuplex | 0 | 0 | Controls advertizing of duplex capability for the copper side of the converter. When set to fullDuplex(1), the converter advertiz… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.16 | cgetf100ClockMaster | 0 | 0 | When yes(1), the converter is supplying clock to the twisted pair. When no(2), the remote supplies the clock. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.17 | cgetf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.18 | cgetf100TPLength | 0 | 0 | Twisted-pair length estimated via the converter's internal Time Domain Reflectometer. 1 means less than 50 meters, 2 means 50 to … |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.19 | cgetf100FiberAutoNegot | 0 | 0 | Fiber port autonegotiation configuration. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.20 | cgetf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |