This device has a jumper or switch that disables
software management of the device. When ConfigMode is
hardware(2), SNMP management is disabled, and all
configuration control comes from physical switches or
jumpers on the device.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgetf100ConfigMode OBJECT-TYPE SYNTAX INTEGER { software(1), hardware(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP management is disabled, and all configuration control comes from physical switches or jumpers on the device." ::= { cgetf100Entry 17 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.8.1.1 | cgetf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.2 | cgetf100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.3 | cgetf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.4 | cgetf100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.5 | cgetf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.6 | cgetf100SerialNumber | 0 | 0 | The serial number of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.7 | cgetf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.8 | cgetf100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.9 | cgetf100TPLink | 0 | 0 | Status of Twisted Pair Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.10 | cgetf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.11 | cgetf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.12 | cgetf100Enabled | 0 | 0 | When this variable is set to no(1), the device allows no traffic to pass. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.13 | cgetf100Pause | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is retained for compat… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.14 | cgetf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.15 | cgetf100FullDuplex | 0 | 0 | Controls advertizing of duplex capability for the copper side of the converter. When set to fullDuplex(1), the converter advertiz… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.16 | cgetf100ClockMaster | 0 | 0 | When yes(1), the converter is supplying clock to the twisted pair. When no(2), the remote supplies the clock. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.18 | cgetf100TPLength | 0 | 0 | Twisted-pair length estimated via the converter's internal Time Domain Reflectometer. 1 means less than 50 meters, 2 means 50 to … |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.19 | cgetf100FiberAutoNegot | 0 | 0 | Fiber port autonegotiation configuration. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.20 | cgetf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.21 | cgetf100PauseType | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is only functional on C… |