When the value is clean(1)Device and Management Module
cache are synchronized, no automatic corrections to
configuration will occur. When the value is dirty(2)
Device and Management Module cache are not synchronized.
The configuration currently displayed by the application
has not been validated by the device. The device may
need to correct the configuration, in which case the
displayed configuration will change.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cgetf100CacheClean OBJECT-TYPE SYNTAX INTEGER { clean(1), dirty(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occur. When the value is dirty(2) Device and Management Module cache are not synchronized. The configuration currently displayed by the application has not been validated by the device. The device may need to correct the configuration, in which case the displayed configuration will change." ::= { cgetf100Entry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.8.1.1 | cgetf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.2 | cgetf100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.3 | cgetf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.4 | cgetf100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.5 | cgetf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.6 | cgetf100SerialNumber | 0 | 0 | The serial number of this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.7 | cgetf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.8 | cgetf100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.9 | cgetf100TPLink | 0 | 0 | Status of Twisted Pair Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.10 | cgetf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.11 | cgetf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.12 | cgetf100Enabled | 0 | 0 | When this variable is set to no(1), the device allows no traffic to pass. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.13 | cgetf100Pause | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is retained for compat… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.14 | cgetf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.15 | cgetf100FullDuplex | 0 | 0 | Controls advertizing of duplex capability for the copper side of the converter. When set to fullDuplex(1), the converter advertiz… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.16 | cgetf100ClockMaster | 0 | 0 | When yes(1), the converter is supplying clock to the twisted pair. When no(2), the remote supplies the clock. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.17 | cgetf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.18 | cgetf100TPLength | 0 | 0 | Twisted-pair length estimated via the converter's internal Time Domain Reflectometer. 1 means less than 50 meters, 2 means 50 to … |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.19 | cgetf100FiberAutoNegot | 0 | 0 | Fiber port autonegotiation configuration. |
1.3.6.1.4.1.868.2.4.1.2.2.8.1.21 | cgetf100PauseType | 0 | 0 | Enable/Disable control for the advertising of Pause capability on the copper interface. This MIB variable is only functional on C… |