Upstream interface's spectrum management information.
Parsed from file CISCO-CABLE-SPECTRUM-MIB.mib
Module: CISCO-CABLE-SPECTRUM-MIB
Upstream interface's spectrum management information.
Upstream interface's spectrum management information.
Parsed from file CISCO-CABLE-SPECTRUM-MIB.my.txt
Company: None
Module: CISCO-CABLE-SPECTRUM-MIB
Upstream interface's spectrum management information.
ccsUpSpecMgmtEntry OBJECT-TYPE SYNTAX CcsUpSpecMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Upstream interface's spectrum management information." INDEX { ifIndex } ::= { ccsUpSpecMgmtTable 1 }
ccsUpSpecMgmtEntry OBJECT-TYPE SYNTAX CcsUpSpecMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Upstream interface's spectrum management information." INDEX { ifIndex } ::= { ccsUpSpecMgmtTable 1 }
Vendor: Cisco
Module: CISCO-CABLE-SPECTRUM-MIB
[Automatically extracted from oidview.com]
ccsUpSpecMgmtEntry OBJECT-TYPE SYNTAX CcsUpSpecMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Upstream interface's spectrum management information." INDEX { ifIndex } ::= { ccsUpSpecMgmtTable 1 }
ccsUpSpecMgmtEntry OBJECT-TYPE SYNTAX CcsUpSpecMgmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Upstream interface's spectrum management information." INDEX { ifIndex } ::= { ccsUpSpecMgmtTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.114.1.3.1.1.1 | ccsUpSpecMgmtHopPriority | 0 | 0 | A preference priority for changing the frequency, modulation, or channel width supporting the automatic switching of the modulati… |
1.3.6.1.4.1.9.9.114.1.3.1.1.2 | ccsUpSpecMgmtSnrThres1 | 0 | 0 | The Signal to Noise (SNR) threshold. This object is applicable for modulation profile 1. When the CMTS detects that the SNR goes… |
1.3.6.1.4.1.9.9.114.1.3.1.1.3 | ccsUpSpecMgmtSnrThres2 | 0 | 0 | The Signal to Noise (SNR) threshold. This object is applicable for modulation profile 2. Refer to ccsUpSpecMgmtCriteria on how cc… |
1.3.6.1.4.1.9.9.114.1.3.1.1.4 | ccsUpSpecMgmtFecCorrectThres1 | 0 | 0 | The Forward Error Correction (FEC) correctable count threshold. This object is applicable for profile 1. A value 0 indicates to … |
1.3.6.1.4.1.9.9.114.1.3.1.1.5 | ccsUpSpecMgmtFecCorrectThres2 | 0 | 0 | The FEC correctable count threshold. This object is applicable for profile 2. When CMTS detects that FEC correctable count goes … |
1.3.6.1.4.1.9.9.114.1.3.1.1.6 | ccsUpSpecMgmtFecUnCorrectThres1 | 0 | 0 | The FEC uncorrectable count threshold. This object is applicable for modulation profile 1. A value 0 indicates to bypass the thr… |
1.3.6.1.4.1.9.9.114.1.3.1.1.7 | ccsUpSpecMgmtFecUnCorrectThres2 | 0 | 0 | The FEC uncorrectable count threshold. This object is applicable for modulation profile 2. A value 0 indicates to bypass the thr… |
1.3.6.1.4.1.9.9.114.1.3.1.1.8 | ccsUpSpecMgmtSnrPollPeriod | 0 | 0 | A period between SNR pollings. The SNR is collected from the Fast Fourier Transform (FFT) measurement over the in-use band when t… |
1.3.6.1.4.1.9.9.114.1.3.1.1.9 | ccsUpSpecMgmtHopCondition | 0 | 0 | A condition that triggers hopping. The SNR condition occurs when SNR does not meet the ccsUpSpecMgmtSnrThres1 or ccsUpSpecMgmtSnr… |
1.3.6.1.4.1.9.9.114.1.3.1.1.10 | ccsUpSpecMgmtFromCenterFreq | 0 | 0 | Center frequency before hopping occurs. A value 0 indicates that the interface has no frequency assigned. |
1.3.6.1.4.1.9.9.114.1.3.1.1.11 | ccsUpSpecMgmtToCenterFreq | 0 | 0 | Current center frequency. A value 0 indicates that the interface has no frequency assigned. |
1.3.6.1.4.1.9.9.114.1.3.1.1.12 | ccsUpSpecMgmtFromBandWidth | 0 | 0 | Bandwidth before hopping occurs. |
1.3.6.1.4.1.9.9.114.1.3.1.1.13 | ccsUpSpecMgmtToBandWidth | 0 | 0 | Current bandwidth. |
1.3.6.1.4.1.9.9.114.1.3.1.1.14 | ccsUpSpecMgmtFromModProfile | 0 | 0 | Modulation profile index before hopping occurs. It is the index identical to the docsIfModIndex in the docsIfCmtsModulationTable.… |
1.3.6.1.4.1.9.9.114.1.3.1.1.15 | ccsUpSpecMgmtToModProfile | 0 | 0 | The current modulation profile index. It is the index identical to the docsIfModIndex in the docsIfCmtsModulationTable. For the de… |
1.3.6.1.4.1.9.9.114.1.3.1.1.16 | ccsUpSpecMgmtSNR | 0 | 0 | Current SNR. A value -99 indicates the system detected no modem on line, and a value of -100 indicates the system was unable to re… |
1.3.6.1.4.1.9.9.114.1.3.1.1.17 | ccsUpSpecMgmtUpperBoundFreq | 0 | 0 | Upper bound frequency that the upstream supports. |
1.3.6.1.4.1.9.9.114.1.3.1.1.18 | ccsUpSpecMgmtCnrThres1 | 0 | 0 | The Carrier to Noise (CNR) threshold. This object is applicable for modulation profile 1. When the CMTS detects that the CNR goe… |
1.3.6.1.4.1.9.9.114.1.3.1.1.19 | ccsUpSpecMgmtCnrThres2 | 0 | 0 | The Carrier to Noise (CNR) threshold. This object is applicable for modulation profile 2. Refer to ccsUpSpecMgmtCriteria on how c… |
1.3.6.1.4.1.9.9.114.1.3.1.1.20 | ccsUpSpecMgmtCNR | 0 | 0 | Current CNR. A value -99 indicates the system detected no modem on line, and a value of -100 indicates the system was unable to re… |
1.3.6.1.4.1.9.9.114.1.3.1.1.21 | ccsUpSpecMgmtMissedMaintMsgThres | 0 | 0 | The missed maintenance message threshold in percentage. A value 0 indicates that the interface has no spectrum group assigned. i.… |
1.3.6.1.4.1.9.9.114.1.3.1.1.22 | ccsUpSpecMgmtHopPeriod | 0 | 0 | The minimum time between frequency hops in seconds. A value 0 indicates that the interface has no spectrum group assigned. i.e. c… |
1.3.6.1.4.1.9.9.114.1.3.1.1.23 | ccsUpSpecMgmtCriteria | 0 | 0 | Defines the criteria that trigger a change in frequency hopping, modulation or channel width. Depending on the type of linecards,… |
1.3.6.1.4.1.9.9.114.1.3.1.1.24 | ccsUpSpecMgmtSpecGroup | 0 | 0 | The spectrum group assigned to the upstream. The value of 0 for the object indicates that the upstream has no spectrum group assi… |
1.3.6.1.4.1.9.9.114.1.3.1.1.25 | ccsUpSpecMgmtSharedSpectrum | 0 | 0 | The fiber-node assigned to the upstreams. Upstreams having same fiber-node number indicates that they physically combine together… |