Reference record for OID 1.3.6.1.4.1.9.9.114.1.3.1.1.5



parent
1.3.6.1.4.1.9.9.114.1.3.1.1 (ccsUpSpecMgmtEntry)
node code
5
node name
ccsUpSpecMgmtFecCorrectThres2
dot oid
1.3.6.1.4.1.9.9.114.1.3.1.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114) ciscoCableSpectrumMIBObjects(1) ccsConfigObjects(3) ccsUpSpecMgmtTable(1) ccsUpSpecMgmtEntry(1) ccsUpSpecMgmtFecCorrectThres2(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB/ciscoCableSpectrumMIBObjects/ccsConfigObjects/ccsUpSpecMgmtTable/ccsUpSpecMgmtEntry/ccsUpSpecMgmtFecCorrectThres2
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/114/1/3/1/1/5

    Description by circitor

    The FEC correctable count threshold. This object
    is applicable for profile 2.

    When CMTS detects that FEC correctable count goes higher
    than ccsUpSpecMgmtFecCorrectThres2, modulation change can
    occur, depending on the type of ccsUpSpecMgmtHopPriority.

    Note: SNMP SET will be rejected if
    ccsUpSpecMgmtFecCorrectThres2 is lower than
    ccsUpSpecMgmtFecCorrectThres1.

    Parsed from file CISCO-CABLE-SPECTRUM-MIB.mib
    Module: CISCO-CABLE-SPECTRUM-MIB

    Description by cisco_v1

    The FEC correctable count threshold. This object
    is applicable for profile 2.

    When CMTS detects that FEC correctable count goes higher
    than ccsUpSpecMgmtFecCorrectThres2, modulation change can
    occur, depending on the type of ccsUpSpecMgmtHopPriority.

    Note: SNMP SET will be rejected if
    ccsUpSpecMgmtFecCorrectThres2 is lower than
    ccsUpSpecMgmtFecCorrectThres1.

    Description by mibdepot

    The FEC correctable count threshold. This object
    is applicable for profile 2.

    When CMTS detects that FEC correctable count goes higher
    than ccsUpSpecMgmtFecCorrectThres2, modulation change can
    occur, depending on the type of ccsUpSpecMgmtHopPriority.

    Note: SNMP SET will be rejected if
    ccsUpSpecMgmtFecCorrectThres2 is lower than
    ccsUpSpecMgmtFecCorrectThres1.

    Parsed from file CISCO-CABLE-SPECTRUM-MIB.my.txt
    Company: None
    Module: CISCO-CABLE-SPECTRUM-MIB

    Description by cisco

    The FEC correctable count threshold. This object
    is applicable for profile 2.

    When CMTS detects that FEC correctable count goes higher
    than ccsUpSpecMgmtFecCorrectThres2, modulation change can
    occur, depending on the type of ccsUpSpecMgmtHopPriority.

    Note: SNMP SET will be rejected if
    ccsUpSpecMgmtFecCorrectThres2 is lower than
    ccsUpSpecMgmtFecCorrectThres1.

    Information by circitor

    ccsUpSpecMgmtFecCorrectThres2 OBJECT-TYPE
    SYNTAX          Integer32 (1..20 )
    MAX-ACCESS      read-write
    STATUS          deprecated
    DESCRIPTION
        "The FEC correctable count threshold.  This object
        is applicable for profile 2.

        When CMTS detects that FEC correctable count goes higher
        than ccsUpSpecMgmtFecCorrectThres2, modulation change can
        occur, depending on the type of ccsUpSpecMgmtHopPriority.

        Note: SNMP SET will be rejected if 
        ccsUpSpecMgmtFecCorrectThres2 is lower than 
        ccsUpSpecMgmtFecCorrectThres1." 
    ::= { ccsUpSpecMgmtEntry 5 }

    Information by cisco_v1

    ccsUpSpecMgmtFecCorrectThres2 OBJECT-TYPE
    SYNTAX INTEGER(1..20)
    ACCESS read-write
    STATUS deprecated
    DESCRIPTION
        "The FEC correctable count threshold.  This object
        is applicable for profile 2.
        
        When CMTS detects that FEC correctable count goes higher
        than ccsUpSpecMgmtFecCorrectThres2, modulation change can
        occur, depending on the type of ccsUpSpecMgmtHopPriority.
        
        Note: SNMP SET will be rejected if 
        ccsUpSpecMgmtFecCorrectThres2 is lower than 
        ccsUpSpecMgmtFecCorrectThres1."
    ::= { ccsUpSpecMgmtEntry 5 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-CABLE-SPECTRUM-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ccsUpSpecMgmtFecCorrectThres2 OBJECT-TYPE
    SYNTAX          Integer32 (1..20 )
    MAX-ACCESS      read-write
    STATUS          deprecated
    DESCRIPTION
        "The FEC correctable count threshold.  This object
        is applicable for profile 2.

        When CMTS detects that FEC correctable count goes higher
        than ccsUpSpecMgmtFecCorrectThres2, modulation change can
        occur, depending on the type of ccsUpSpecMgmtHopPriority.

        Note: SNMP SET will be rejected if 
        ccsUpSpecMgmtFecCorrectThres2 is lower than 
        ccsUpSpecMgmtFecCorrectThres1." 
    ::= { ccsUpSpecMgmtEntry 5 }

    Information by cisco

    ccsUpSpecMgmtFecCorrectThres2 OBJECT-TYPE
    SYNTAX          Integer32 (1..20)
    MAX-ACCESS      read-write
    STATUS          deprecated
    DESCRIPTION
        "The FEC correctable count threshold.  This object
        is applicable for profile 2.

        When CMTS detects that FEC correctable count goes higher
        than ccsUpSpecMgmtFecCorrectThres2, modulation change can
        occur, depending on the type of ccsUpSpecMgmtHopPriority.

        Note: SNMP SET will be rejected if 
        ccsUpSpecMgmtFecCorrectThres2 is lower than 
        ccsUpSpecMgmtFecCorrectThres1." 
    ::= { ccsUpSpecMgmtEntry 5 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (24)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.114.1.3.1.1.1 ccsUpSpecMgmtHopPriority 0 0 A preference priority for changing the frequency,
    modulation, or channel width supporting the automatic
    switching of the modulati…
    1.3.6.1.4.1.9.9.114.1.3.1.1.2 ccsUpSpecMgmtSnrThres1 0 0 The Signal to Noise (SNR) threshold. This object
    is applicable for modulation profile 1.

    When the CMTS detects that the SNR goes…
    1.3.6.1.4.1.9.9.114.1.3.1.1.3 ccsUpSpecMgmtSnrThres2 0 0 The Signal to Noise (SNR) threshold. This object
    is applicable for modulation profile 2.

    Refer to ccsUpSpecMgmtCriteria on how
    cc…
    1.3.6.1.4.1.9.9.114.1.3.1.1.4 ccsUpSpecMgmtFecCorrectThres1 0 0 The Forward Error Correction (FEC) correctable count
    threshold. This object is applicable for profile 1.

    A value 0 indicates to …
    1.3.6.1.4.1.9.9.114.1.3.1.1.6 ccsUpSpecMgmtFecUnCorrectThres1 0 0 The FEC uncorrectable count threshold. This object
    is applicable for modulation profile 1.

    A value 0 indicates to bypass the thr…
    1.3.6.1.4.1.9.9.114.1.3.1.1.7 ccsUpSpecMgmtFecUnCorrectThres2 0 0 The FEC uncorrectable count threshold. This object
    is applicable for modulation profile 2.

    A value 0 indicates to bypass the thr…
    1.3.6.1.4.1.9.9.114.1.3.1.1.8 ccsUpSpecMgmtSnrPollPeriod 0 0 A period between SNR pollings.

    The SNR is collected from the Fast Fourier Transform
    (FFT) measurement over the in-use band when t…
    1.3.6.1.4.1.9.9.114.1.3.1.1.9 ccsUpSpecMgmtHopCondition 0 0 A condition that triggers hopping.

    The SNR condition occurs when SNR does not meet
    the ccsUpSpecMgmtSnrThres1 or ccsUpSpecMgmtSnr…
    1.3.6.1.4.1.9.9.114.1.3.1.1.10 ccsUpSpecMgmtFromCenterFreq 0 0 Center frequency before hopping occurs.

    A value 0 indicates that the interface has no
    frequency assigned.
    1.3.6.1.4.1.9.9.114.1.3.1.1.11 ccsUpSpecMgmtToCenterFreq 0 0 Current center frequency.

    A value 0 indicates that the interface has no
    frequency assigned.
    1.3.6.1.4.1.9.9.114.1.3.1.1.12 ccsUpSpecMgmtFromBandWidth 0 0 Bandwidth before hopping occurs.
    1.3.6.1.4.1.9.9.114.1.3.1.1.13 ccsUpSpecMgmtToBandWidth 0 0 Current bandwidth.
    1.3.6.1.4.1.9.9.114.1.3.1.1.14 ccsUpSpecMgmtFromModProfile 0 0 Modulation profile index before hopping occurs.
    It is the index identical to the docsIfModIndex
    in the docsIfCmtsModulationTable.…
    1.3.6.1.4.1.9.9.114.1.3.1.1.15 ccsUpSpecMgmtToModProfile 0 0 The current modulation profile index.
    It is the index identical to the docsIfModIndex
    in the docsIfCmtsModulationTable.

    For the de…
    1.3.6.1.4.1.9.9.114.1.3.1.1.16 ccsUpSpecMgmtSNR 0 0 Current SNR.
    A value -99 indicates the system detected no
    modem on line, and a value of -100 indicates the
    system was unable to re…
    1.3.6.1.4.1.9.9.114.1.3.1.1.17 ccsUpSpecMgmtUpperBoundFreq 0 0 Upper bound frequency that the upstream supports.
    1.3.6.1.4.1.9.9.114.1.3.1.1.18 ccsUpSpecMgmtCnrThres1 0 0 The Carrier to Noise (CNR) threshold. This
    object is applicable for modulation profile 1.


    When the CMTS detects that the CNR goe…
    1.3.6.1.4.1.9.9.114.1.3.1.1.19 ccsUpSpecMgmtCnrThres2 0 0 The Carrier to Noise (CNR) threshold. This object
    is applicable for modulation profile 2.

    Refer to ccsUpSpecMgmtCriteria on how
    c…
    1.3.6.1.4.1.9.9.114.1.3.1.1.20 ccsUpSpecMgmtCNR 0 0 Current CNR.
    A value -99 indicates the system detected no
    modem on line, and a value of -100 indicates the
    system was unable to re…
    1.3.6.1.4.1.9.9.114.1.3.1.1.21 ccsUpSpecMgmtMissedMaintMsgThres 0 0 The missed maintenance message threshold in percentage.

    A value 0 indicates that the interface has no spectrum
    group assigned. i.…
    1.3.6.1.4.1.9.9.114.1.3.1.1.22 ccsUpSpecMgmtHopPeriod 0 0 The minimum time between frequency hops in seconds.

    A value 0 indicates that the interface has no
    spectrum group assigned. i.e. c…
    1.3.6.1.4.1.9.9.114.1.3.1.1.23 ccsUpSpecMgmtCriteria 0 0 Defines the criteria that trigger a change in
    frequency hopping, modulation or channel width.

    Depending on the type of linecards,…
    1.3.6.1.4.1.9.9.114.1.3.1.1.24 ccsUpSpecMgmtSpecGroup 0 0 The spectrum group assigned to the upstream. The value of 0 for
    the object indicates that the upstream has no spectrum group
    assi…
    1.3.6.1.4.1.9.9.114.1.3.1.1.25 ccsUpSpecMgmtSharedSpectrum 0 0 The fiber-node assigned to the upstreams. Upstreams having
    same fiber-node number indicates that they physically
    combine together…