Reference record for OID 1.3.6.1.4.1.9.9.114

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

114

node name

ciscoCableSpectrumMIB

dot oid

1.3.6.1.4.1.9.9.114

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoCableSpectrumMIB(114)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoCableSpectrumMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoCableSpectrumMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/114

Description by circitor

This is the MIB Module for Cable Spectrum Management for
DOCSIS-compliant Cable Modem Termination Systems (CMTS).

Spectrum management is a software/hardware feature provided
in the CMTS so that the CMTS may sense both downstream and
upstream plant impairments, report them to a management
entity, and automatically mitigate them where possible.

The CMTS directly senses upstream transmission errors.It
may also indirectly monitor the condition of the plant by
keeping a record of modem state changes. It is desireable
to perform these functions without reducing throughput or
latency and without creating additional packet overhead on
the RF plant.

The purpose of cable Spectrum Management is to prevent long
term service interruptions caused by upstream noise events
in the cable plant. It is also used for fault management
and trouble shooting the cable network. When modems are
detected to go on-line and off-line by flap detectors, the
cable operators can look at the flap list and spectrum
tables to determine the possible causes.

Parsed from file CISCO-CABLE-SPECTRUM-MIB.mib
Module: CISCO-CABLE-SPECTRUM-MIB

Description by mibdepot

This is the MIB Module for Cable Spectrum Management for
DOCSIS-compliant Cable Modem Termination Systems (CMTS).

Spectrum management is a software/hardware feature provided
in the CMTS so that the CMTS may sense both downstream and
upstream plant impairments, report them to a management
entity, and automatically mitigate them where possible.

The CMTS directly senses upstream transmission errors.It
may also indirectly monitor the condition of the plant by
keeping a record of modem state changes. It is desireable
to perform these functions without reducing throughput or
latency and without creating additional packet overhead on
the RF plant.

The purpose of cable Spectrum Management is to prevent long
term service interruptions caused by upstream noise events
in the cable plant. It is also used for fault management
and trouble shooting the cable network. When modems are
detected to go on-line and off-line by flap detectors, the
cable operators can look at the flap list and spectrum
tables to determine the possible causes.

Parsed from file CISCO-CABLE-SPECTRUM-MIB.my.txt
Company: None
Module: CISCO-CABLE-SPECTRUM-MIB

Description by cisco

This is the MIB Module for Cable Spectrum Management for
DOCSIS-compliant Cable Modem Termination Systems (CMTS).

Spectrum management is a software/hardware feature provided
in the CMTS so that the CMTS may sense both downstream and
upstream plant impairments, report them to a management
entity, and automatically mitigate them where possible.

The CMTS directly senses upstream transmission errors.It
may also indirectly monitor the condition of the plant by
keeping a record of modem state changes. It is desireable
to perform these functions without reducing throughput or
latency and without creating additional packet overhead on
the RF plant.

The purpose of cable Spectrum Management is to prevent long
term service interruptions caused by upstream noise events
in the cable plant. It is also used for fault management
and trouble shooting the cable network. When modems are
detected to go on-line and off-line by flap detectors, the
cable operators can look at the flap list and spectrum
tables to determine the possible causes.

Information by circitor

ciscoCableSpectrumMIB MODULE-IDENTITY
    LAST-UPDATED    "200610100000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service
            Postal: cisco Systems
            170 West Tasman Drive
            San Jose, CA 95134
            U.S.A.
            Tel: +1 800 553-NETS
            E-mail: [email protected]"
    DESCRIPTION
        "This is the MIB Module for Cable Spectrum Management for
        DOCSIS-compliant Cable Modem Termination Systems (CMTS).

        Spectrum management is a software/hardware feature provided
        in the CMTS so that the CMTS may sense both downstream and
        upstream plant impairments, report them to a management
        entity, and automatically mitigate them where possible.

        The CMTS directly senses upstream transmission errors.It
        may also indirectly monitor the condition of the plant by
        keeping a record of modem state changes.  It is desireable
        to perform these functions without reducing throughput or
        latency and without creating additional packet overhead on
        the RF plant.

        The purpose of cable Spectrum Management is to prevent long
        term service interruptions caused by upstream noise events
        in the cable plant.  It is also used for fault management
        and trouble shooting the cable network.  When modems are
        detected to go on-line and off-line by flap detectors, the
        cable operators can look at the flap list and spectrum
        tables to determine the possible causes."
    REVISION        "200610100000Z"
    DESCRIPTION
        "1. Added spectrum group global configuration table
        as ccsSpecGroupFreqTable.
        2. Added ccsUpInSpecGroupTable and ccsUpInFiberNodeTable
        to populate all cable upstream interfaces in each
        spectrum group and fiber-node.
        3. Added ccsUpSpecMgmtSpecGroup and
        ccsUpSpecMgmtSharedSpectrum into ccsUpSpecMgmtTable to
        populate spectrum group configuration and topology
        information for each upstream.
        4. Included 0 as part of ccsUpSpecMgmtHopPeriod.
        5. Changed the SYNTAX of ccsUpSpecMgmtFromCenterFreq and
        ccsUpSpecMgmtToCenterFreq from CCSFrequency to
        Unsigned32 (0 | 5000..65000).
        6. Changed the SYNTAX of ccsUpSpecMgmtFromBandWidth and
        ccsUpSpecMgmtToBandWidth from CCSFrequency to
        Unsigned32 (200 | 400 | 800 | 1600 | 3200 | 6400).
        7. Increased ccsUpSpecMgmtFecUnCorrectThres2 range to 30.
        Included 0 as part of it.
        8. Updated the description for ccsUpSpecMgmtHopPeriod,
        ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtFromCenterFreq, ccsUpSpecMgmtToCenterFreq,
        and ccsUpSpecMgmtFecUnCorrectThres2."
    REVISION        "200409050000Z"
    DESCRIPTION
        "1. Included 0 as part of ccsUpSpecMgmtSnrThres,
        ccsUpSpecMgmtCnrThres, ccsUpSpecMgmtFecCorrectThres, 
        ccsUpSpecMgmtFecUnCorrectThres ranges.
        2. Increased  ccsUpSpecMgmtFecCorrectThres and
        ccsUpSpecMgmtFecUnCorrectThres range to 30"
    REVISION        "200407140000Z"
    DESCRIPTION
        "1. Modified ccsUpSpecMgmtSNR's description to reflect its
        name since there's a new object defined for CNR. 
        2. Added ccsUpSpecMgmtCnrThres1, ccsUpSpecMgmtCnrThres1,
        ccsUpSpecMgmtCNR, ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtHopPeriod, ccsUpSpecMgmtCriteria.
        3. Deprecated ccsUpSpecMgmtFecCorrectThres2
        4. Deprecated ccsUpSpecMgmtHopCondition and replaced
        it with ccsUpSpecMgmtCriteria.
        5. Deprecated ccsHoppingNotification and replaced
        it with ccsSpecMgmtNotification."
    REVISION        "200403020000Z"
    DESCRIPTION
        "1. Modified description for ccsFlapListMaxSize and
        ccsFlapListCurrentSize.
        2. Implement ccsCmFlapTable using downstream, upstream and 
        Mac as indices to replace ccsFlapTable.
        3. Modified description for ccsSNRRequestTable.
        4. Added ccsUpSpecMgmtUpperBoundFreq.
        5. Added ccsCompliance5."
    REVISION        "200306180000Z"
    DESCRIPTION
        "1. Changed range of CCSFrequency and CCSMeasuredFrequency
        TEXTUAL-CONVENTION to support Euro-DOCSIS and J-DOCSIS."
    REVISION        "200206100000Z"
    DESCRIPTION
        "1. Changed range for ccsUpSpecMgmtFecCorrectThres1,
        ccsUpSpecMgmtFecCorrectThres2, 
        ccsUpSpecMgmtFecUnCorrectThres1,
        ccsUpSpecMgmtFecUnCorrectThres2 and ccsUpSpecMgmtSnrThres2.
        2. Changed modemOffline(1) enumeration to 
        stationMaintainenceMiss.
        3. Added ccsUpSpecMgmtGroupRev1 to ccsCompliance4."
    REVISION        "200102010000Z"
    DESCRIPTION
        "1. Added new objects ccsFlapMissThreshold,
        ccsFlapPowerAdjustThreshold, ccsFlapResetAll, ccsFlapClearAll
        and ccsFlapLastClearTime.
         2. Added new objects ccsFlapInsertionFailNum,
        ccsFlapHitNum, ccsFlapMissNum, ccsFlapCrcErrorNum,
        ccsFlapPowerAdjustmentNum, ccsFlapTotalNum,
        ccsFlapResetNow, ccsFlapLastResetTime into ccsFlapTable."
    REVISION        "200008180000Z"
    DESCRIPTION
        "1. Removed ccsSNRRequestUpperFreq and ccsSNRRequestLowFreq
        from ccsSNRRequestTable.
         2. Changed ccsSNRRequestSNR from Unsigned32 to Integer32.
         3. Modified description for ccsHoppingNotification.
         4. Changed ccsSpectrumRequestResolution to Khz."
    REVISION        "200004240000Z"
    DESCRIPTION
        "Added new object groups:
        1. ccsSpectrumObjects to provide spectrum information
        2. ccsConfigObjects to support spectrum management
           functions."
          ::= { ciscoMgmt 114 }

Information by cisco_v1

ciscoCableSpectrumMIB OBJECT IDENTIFIER ::= { ciscoMgmt 114 }

Information by oid_info

Vendor: Cisco
Module: CISCO-CABLE-SPECTRUM-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoCableSpectrumMIB MODULE-IDENTITY
    LAST-UPDATED    "200610100000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service
            Postal: cisco Systems
            170 West Tasman Drive
            San Jose, CA 95134
            U.S.A.
            Tel: +1 800 553-NETS
            E-mail: [email protected]"
    DESCRIPTION
        "This is the MIB Module for Cable Spectrum Management for
        DOCSIS-compliant Cable Modem Termination Systems (CMTS).

        Spectrum management is a software/hardware feature provided
        in the CMTS so that the CMTS may sense both downstream and
        upstream plant impairments, report them to a management
        entity, and automatically mitigate them where possible.

        The CMTS directly senses upstream transmission errors.It
        may also indirectly monitor the condition of the plant by
        keeping a record of modem state changes.  It is desireable
        to perform these functions without reducing throughput or
        latency and without creating additional packet overhead on
        the RF plant.

        The purpose of cable Spectrum Management is to prevent long
        term service interruptions caused by upstream noise events
        in the cable plant.  It is also used for fault management
        and trouble shooting the cable network.  When modems are
        detected to go on-line and off-line by flap detectors, the
        cable operators can look at the flap list and spectrum
        tables to determine the possible causes."
    REVISION        "200610100000Z"
    DESCRIPTION
        "1. Added spectrum group global configuration table
        as ccsSpecGroupFreqTable.
        2. Added ccsUpInSpecGroupTable and ccsUpInFiberNodeTable
        to populate all cable upstream interfaces in each
        spectrum group and fiber-node.
        3. Added ccsUpSpecMgmtSpecGroup and
        ccsUpSpecMgmtSharedSpectrum into ccsUpSpecMgmtTable to
        populate spectrum group configuration and topology
        information for each upstream.
        4. Included 0 as part of ccsUpSpecMgmtHopPeriod.
        5. Changed the SYNTAX of ccsUpSpecMgmtFromCenterFreq and
        ccsUpSpecMgmtToCenterFreq from CCSFrequency to
        Unsigned32 (0 | 5000..65000).
        6. Changed the SYNTAX of ccsUpSpecMgmtFromBandWidth and
        ccsUpSpecMgmtToBandWidth from CCSFrequency to
        Unsigned32 (200 | 400 | 800 | 1600 | 3200 | 6400).
        7. Increased ccsUpSpecMgmtFecUnCorrectThres2 range to 30.
        Included 0 as part of it.
        8. Updated the description for ccsUpSpecMgmtHopPeriod,
        ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtFromCenterFreq, ccsUpSpecMgmtToCenterFreq,
        and ccsUpSpecMgmtFecUnCorrectThres2."
    REVISION        "200409050000Z"
    DESCRIPTION
        "1. Included 0 as part of ccsUpSpecMgmtSnrThres,
        ccsUpSpecMgmtCnrThres, ccsUpSpecMgmtFecCorrectThres, 
        ccsUpSpecMgmtFecUnCorrectThres ranges.
        2. Increased  ccsUpSpecMgmtFecCorrectThres and
        ccsUpSpecMgmtFecUnCorrectThres range to 30"
    REVISION        "200407140000Z"
    DESCRIPTION
        "1. Modified ccsUpSpecMgmtSNR's description to reflect its
        name since there's a new object defined for CNR. 
        2. Added ccsUpSpecMgmtCnrThres1, ccsUpSpecMgmtCnrThres1,
        ccsUpSpecMgmtCNR, ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtHopPeriod, ccsUpSpecMgmtCriteria.
        3. Deprecated ccsUpSpecMgmtFecCorrectThres2
        4. Deprecated ccsUpSpecMgmtHopCondition and replaced
        it with ccsUpSpecMgmtCriteria.
        5. Deprecated ccsHoppingNotification and replaced
        it with ccsSpecMgmtNotification."
    REVISION        "200403020000Z"
    DESCRIPTION
        "1. Modified description for ccsFlapListMaxSize and
        ccsFlapListCurrentSize.
        2. Implement ccsCmFlapTable using downstream, upstream and 
        Mac as indices to replace ccsFlapTable.
        3. Modified description for ccsSNRRequestTable.
        4. Added ccsUpSpecMgmtUpperBoundFreq.
        5. Added ccsCompliance5."
    REVISION        "200306180000Z"
    DESCRIPTION
        "1. Changed range of CCSFrequency and CCSMeasuredFrequency
        TEXTUAL-CONVENTION to support Euro-DOCSIS and J-DOCSIS."
    REVISION        "200206100000Z"
    DESCRIPTION
        "1. Changed range for ccsUpSpecMgmtFecCorrectThres1,
        ccsUpSpecMgmtFecCorrectThres2, 
        ccsUpSpecMgmtFecUnCorrectThres1,
        ccsUpSpecMgmtFecUnCorrectThres2 and ccsUpSpecMgmtSnrThres2.
        2. Changed modemOffline(1) enumeration to 
        stationMaintainenceMiss.
        3. Added ccsUpSpecMgmtGroupRev1 to ccsCompliance4."
    REVISION        "200102010000Z"
    DESCRIPTION
        "1. Added new objects ccsFlapMissThreshold,
        ccsFlapPowerAdjustThreshold, ccsFlapResetAll, ccsFlapClearAll
        and ccsFlapLastClearTime.
         2. Added new objects ccsFlapInsertionFailNum,
        ccsFlapHitNum, ccsFlapMissNum, ccsFlapCrcErrorNum,
        ccsFlapPowerAdjustmentNum, ccsFlapTotalNum,
        ccsFlapResetNow, ccsFlapLastResetTime into ccsFlapTable."
    REVISION        "200008180000Z"
    DESCRIPTION
        "1. Removed ccsSNRRequestUpperFreq and ccsSNRRequestLowFreq
        from ccsSNRRequestTable.
         2. Changed ccsSNRRequestSNR from Unsigned32 to Integer32.
         3. Modified description for ccsHoppingNotification.
         4. Changed ccsSpectrumRequestResolution to Khz."
    REVISION        "200004240000Z"
    DESCRIPTION
        "Added new object groups:
        1. ccsSpectrumObjects to provide spectrum information
        2. ccsConfigObjects to support spectrum management
           functions."
          ::= { ciscoMgmt 114 }

Information by cisco

ciscoCableSpectrumMIB MODULE-IDENTITY
    LAST-UPDATED    "201104080000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service
            Postal: cisco Systems
            170 West Tasman Drive
            San Jose, CA 95134
            U.S.A.
            Tel: +1 800 553-NETS
            E-mail: [email protected]"
    DESCRIPTION
        "This is the MIB Module for Cable Spectrum Management for
        DOCSIS-compliant Cable Modem Termination Systems (CMTS).

        Spectrum management is a software/hardware feature provided
        in the CMTS so that the CMTS may sense both downstream and
        upstream plant impairments, report them to a management
        entity, and automatically mitigate them where possible.

        The CMTS directly senses upstream transmission errors.It
        may also indirectly monitor the condition of the plant by
        keeping a record of modem state changes.  It is desireable
        to perform these functions without reducing throughput or
        latency and without creating additional packet overhead on
        the RF plant.

        The purpose of cable Spectrum Management is to prevent long
        term service interruptions caused by upstream noise events
        in the cable plant.  It is also used for fault management
        and trouble shooting the cable network.  When modems are
        detected to go on-line and off-line by flap detectors, the
        cable operators can look at the flap list and spectrum
        tables to determine the possible causes."
    REVISION        "201104080000Z"
    DESCRIPTION
        "1. Changed Range Of Ccsfrequency And Ccsmeasuredfrequency
        Textual-Convention To Support The Docsis 3.0 Extended Upstream
        Frequency Range."
    REVISION        "200610100000Z"
    DESCRIPTION
        "1. Added spectrum group global configuration table
        as ccsSpecGroupFreqTable.
        2. Added ccsUpInSpecGroupTable and ccsUpInFiberNodeTable
        to populate all cable upstream interfaces in each
        spectrum group and fiber-node.
        3. Added ccsUpSpecMgmtSpecGroup and
        ccsUpSpecMgmtSharedSpectrum into ccsUpSpecMgmtTable to
        populate spectrum group configuration and topology
        information for each upstream.
        4. Included 0 as part of ccsUpSpecMgmtHopPeriod.
        5. Changed the SYNTAX of ccsUpSpecMgmtFromCenterFreq and
        ccsUpSpecMgmtToCenterFreq from CCSFrequency to
        Unsigned32 (0 | 5000..65000).
        6. Changed the SYNTAX of ccsUpSpecMgmtFromBandWidth and
        ccsUpSpecMgmtToBandWidth from CCSFrequency to
        Unsigned32 (200 | 400 | 800 | 1600 | 3200 | 6400).
        7. Increased ccsUpSpecMgmtFecUnCorrectThres2 range to 30.
        Included 0 as part of it.
        8. Updated the description for ccsUpSpecMgmtHopPeriod,
        ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtFromCenterFreq, ccsUpSpecMgmtToCenterFreq,
        and ccsUpSpecMgmtFecUnCorrectThres2."
    REVISION        "200409050000Z"
    DESCRIPTION
        "1. Included 0 as part of ccsUpSpecMgmtSnrThres,
        ccsUpSpecMgmtCnrThres, ccsUpSpecMgmtFecCorrectThres, 
        ccsUpSpecMgmtFecUnCorrectThres ranges.
        2. Increased  ccsUpSpecMgmtFecCorrectThres and
        ccsUpSpecMgmtFecUnCorrectThres range to 30"
    REVISION        "200407140000Z"
    DESCRIPTION
        "1. Modified ccsUpSpecMgmtSNR's description to reflect its
        name since there's a new object defined for CNR. 
        2. Added ccsUpSpecMgmtCnrThres1, ccsUpSpecMgmtCnrThres1,
        ccsUpSpecMgmtCNR, ccsUpSpecMgmtMissedMaintMsgThres,
        ccsUpSpecMgmtHopPeriod, ccsUpSpecMgmtCriteria.
        3. Deprecated ccsUpSpecMgmtFecCorrectThres2
        4. Deprecated ccsUpSpecMgmtHopCondition and replaced
        it with ccsUpSpecMgmtCriteria.
        5. Deprecated ccsHoppingNotification and replaced
        it with ccsSpecMgmtNotification."
    REVISION        "200403020000Z"
    DESCRIPTION
        "1. Modified description for ccsFlapListMaxSize and
        ccsFlapListCurrentSize.
        2. Implement ccsCmFlapTable using downstream, upstream and 
        Mac as indices to replace ccsFlapTable.
        3. Modified description for ccsSNRRequestTable.
        4. Added ccsUpSpecMgmtUpperBoundFreq.
        5. Added ccsCompliance5."
    REVISION        "200306180000Z"
    DESCRIPTION
        "1. Changed range of CCSFrequency and CCSMeasuredFrequency
        TEXTUAL-CONVENTION to support Euro-DOCSIS and J-DOCSIS."
    REVISION        "200206100000Z"
    DESCRIPTION
        "1. Changed range for ccsUpSpecMgmtFecCorrectThres1,
        ccsUpSpecMgmtFecCorrectThres2, 
        ccsUpSpecMgmtFecUnCorrectThres1,
        ccsUpSpecMgmtFecUnCorrectThres2 and ccsUpSpecMgmtSnrThres2.
        2. Changed modemOffline(1) enumeration to 
        stationMaintainenceMiss.
        3. Added ccsUpSpecMgmtGroupRev1 to ccsCompliance4."
    REVISION        "200102010000Z"
    DESCRIPTION
        "1. Added new objects ccsFlapMissThreshold,
        ccsFlapPowerAdjustThreshold, ccsFlapResetAll, ccsFlapClearAll
        and ccsFlapLastClearTime.
         2. Added new objects ccsFlapInsertionFailNum,
        ccsFlapHitNum, ccsFlapMissNum, ccsFlapCrcErrorNum,
        ccsFlapPowerAdjustmentNum, ccsFlapTotalNum,
        ccsFlapResetNow, ccsFlapLastResetTime into ccsFlapTable."
    REVISION        "200008180000Z"
    DESCRIPTION
        "1. Removed ccsSNRRequestUpperFreq and ccsSNRRequestLowFreq
        from ccsSNRRequestTable.
         2. Changed ccsSNRRequestSNR from Unsigned32 to Integer32.
         3. Modified description for ccsHoppingNotification.
         4. Changed ccsSpectrumRequestResolution to Khz."
    REVISION        "200004240000Z"
    DESCRIPTION
        "Added new object groups:
        1. ccsSpectrumObjects to provide spectrum information
        2. ccsConfigObjects to support spectrum management
           functions."
    ::= { ciscoMgmt 114 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (3)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.