This MIB is used to support MGC(call agent) and
MGC Group configuration.
The MGC or MGC group configuration is performed
under a specific gateway(cmgwIndex).
The call agent is an external element (outside
of gateway) with call control intelligence
to control call connection in gateway.
The protocols used for communication between voice
gateway and call agent included SGCP, MGCP, ...
Multiple IP addresses can be associated with one
call agent.
An MGC group is a logical grouping of several MGCs
into one group.
MGC redundancy is used to support multi call agent
for one gateway. With MGC redundancy, a voice
gateway can send gateway-initiated-commands to the
next MGC in the MGC group if it fails to receive
response from any IP address(es) associated to the
current MGC.
To use MGC redundancy in gateway:
Step 1: add individual entry (in any order) for
profile
MGC
Step 2: make association between the entries
1 IP with MGC
2 MGC with MGC group
1/2 protocol with MGC group
3 MGC group with profile
or
MGC group with gateway
Only if a MGC group at least is associated with
one profile or gateway, then the MGC group can be
used, otherwise the MGC group is useless.
To delete the following entries, it is needed to
do de-association first:
profile
MGC
When do de-association, the order is opposite to that
of association.
Parsed from file CISCO-MGC-MIB.mib
Module: CISCO-MGC-MIB
This MIB is used to support MGC(call agent) and
MGC Group configuration.
The MGC or MGC group configuration is performed
under a specific gateway(cmgwIndex).
The call agent is an external element (outside
of gateway) with call control intelligence
to control call connection in gateway.
The protocols used for communication between voice
gateway and call agent included SGCP, MGCP, ...
Multiple IP addresses can be associated with one
call agent.
An MGC group is a logical grouping of several MGCs
into one group.
MGC redundancy is used to support multi call agent
for one gateway. With MGC redundancy, a voice
gateway can send gateway-initiated-commands to the
next MGC in the MGC group if it fails to receive
response from any IP address(es) associated to the
current MGC.
To use MGC redundancy in gateway:
Step 1: add individual entry (in any order) for
profile
MGC
Step 2: make association between the entries
1 IP with MGC
2 MGC with MGC group
1/2 protocol with MGC group
3 MGC group with profile
or
MGC group with gateway
Only if a MGC group at least is associated with
one profile or gateway, then the MGC group can be
used, otherwise the MGC group is useless.
To delete the following entries, it is needed to
do de-association first:
profile
MGC
When do de-association, the order is opposite to that
of association.
Parsed from file CISCO-MGC-MIB.my.txt
Company: None
Module: CISCO-MGC-MIB
This MIB is used to support MGC(call agent) and
MGC Group configuration.
The MGC or MGC group configuration is performed
under a specific gateway(cmgwIndex).
The call agent is an external element (outside
of gateway) with call control intelligence
to control call connection in gateway.
The protocols used for communication between voice
gateway and call agent included SGCP, MGCP, ...
Multiple IP addresses can be associated with one
call agent.
An MGC group is a logical grouping of several MGCs
into one group.
MGC redundancy is used to support multi call agent
for one gateway. With MGC redundancy, a voice
gateway can send gateway-initiated-commands to the
next MGC in the MGC group if it fails to receive
response from any IP address(es) associated to the
current MGC.
To use MGC redundancy in gateway:
Step 1: add individual entry (in any order) for
profile
MGC
Step 2: make association between the entries
1 IP with MGC
2 MGC with MGC group
1/2 protocol with MGC group
3 MGC group with profile
or
MGC group with gateway
Only if a MGC group at least is associated with
one profile or gateway, then the MGC group can be
used, otherwise the MGC group is useless.
To delete the following entries, it is needed to
do de-association first:
profile
MGC
When do de-association, the order is opposite to that
of association.
ciscoMgcMIB MODULE-IDENTITY LAST-UPDATED "200304180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a specific gateway(cmgwIndex). The call agent is an external element (outside of gateway) with call control intelligence to control call connection in gateway. The protocols used for communication between voice gateway and call agent included SGCP, MGCP, ... Multiple IP addresses can be associated with one call agent. An MGC group is a logical grouping of several MGCs into one group. MGC redundancy is used to support multi call agent for one gateway. With MGC redundancy, a voice gateway can send gateway-initiated-commands to the next MGC in the MGC group if it fails to receive response from any IP address(es) associated to the current MGC. To use MGC redundancy in gateway: Step 1: add individual entry (in any order) for profile MGC Step 2: make association between the entries 1 IP with MGC 2 MGC with MGC group 1/2 protocol with MGC group 3 MGC group with profile or MGC group with gateway Only if a MGC group at least is associated with one profile or gateway, then the MGC group can be used, otherwise the MGC group is useless. To delete the following entries, it is needed to do de-association first: profile MGC When do de-association, the order is opposite to that of association. " REVISION "200304180000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoMgmt 321 }
ciscoMgcMIB OBJECT IDENTIFIER ::= { ciscoMgmt 321 }
Vendor: Cisco
Module: CISCO-MGC-MIB
[Automatically extracted from oidview.com]
ciscoMgcMIB MODULE-IDENTITY LAST-UPDATED "200304180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a specific gateway(cmgwIndex). The call agent is an external element (outside of gateway) with call control intelligence to control call connection in gateway. The protocols used for communication between voice gateway and call agent included SGCP, MGCP, ... Multiple IP addresses can be associated with one call agent. An MGC group is a logical grouping of several MGCs into one group. MGC redundancy is used to support multi call agent for one gateway. With MGC redundancy, a voice gateway can send gateway-initiated-commands to the next MGC in the MGC group if it fails to receive response from any IP address(es) associated to the current MGC. To use MGC redundancy in gateway: Step 1: add individual entry (in any order) for profile MGC Step 2: make association between the entries 1 IP with MGC 2 MGC with MGC group 1/2 protocol with MGC group 3 MGC group with profile or MGC group with gateway Only if a MGC group at least is associated with one profile or gateway, then the MGC group can be used, otherwise the MGC group is useless. To delete the following entries, it is needed to do de-association first: profile MGC When do de-association, the order is opposite to that of association. " REVISION "200304180000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoMgmt 321 }
ciscoMgcMIB MODULE-IDENTITY LAST-UPDATED "200304180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a specific gateway(cmgwIndex). The call agent is an external element (outside of gateway) with call control intelligence to control call connection in gateway. The protocols used for communication between voice gateway and call agent included SGCP, MGCP, ... Multiple IP addresses can be associated with one call agent. An MGC group is a logical grouping of several MGCs into one group. MGC redundancy is used to support multi call agent for one gateway. With MGC redundancy, a voice gateway can send gateway-initiated-commands to the next MGC in the MGC group if it fails to receive response from any IP address(es) associated to the current MGC. To use MGC redundancy in gateway: Step 1: add individual entry (in any order) for profile MGC Step 2: make association between the entries 1 IP with MGC 2 MGC with MGC group 1/2 protocol with MGC group 3 MGC group with profile or MGC group with gateway Only if a MGC group at least is associated with one profile or gateway, then the MGC group can be used, otherwise the MGC group is useless. To delete the following entries, it is needed to do de-association first: profile MGC When do de-association, the order is opposite to that of association. " REVISION "200304180000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoMgmt 321 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.321.0 | cMgcMibNotifications | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.321.1 | cMgcMibObjects | 2 | 32 | None |
| 1.3.6.1.4.1.9.9.321.2 | cMgcMIBConformance | 2 | 8 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
| 1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
| 1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
| 1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
| 1.3.6.1.4.1.9.9.278 | ciscoIpProtocolMIB | 3 | 63 | The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users… |
| 1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
| 1.3.6.1.4.1.9.9.281 | ciscoFabricC12kMIB | 3 | 135 | Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities an… |
| 1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
| 1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
| 1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
| 1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
| 1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
| 1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
| 1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
| 1.3.6.1.4.1.9.9.297 | ciscoFcsMIB | 2 | 122 | The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB ena… |
| 1.3.6.1.4.1.9.9.299 | ciscoExtScsiMIB | 2 | 68 | The Cisco extension to CISCO-SCSI-MIB which is a copy of the Internet draft, the SCSI-MIB, from the IETF. Glossary of terms used i… |
| 1.3.6.1.4.1.9.9.300 | ciscoCallHomeMIB | 3 | 324 | The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deployin… |
| 1.3.6.1.4.1.9.9.301 | ciscoSyslogExtMIB | 2 | 44 | MIB module for configuring and monitoring System Log related management parameters as defined by RFC 3164. |
| 1.3.6.1.4.1.9.9.302 | ciscoDmMIB | 2 | 85 | The MIB module for the domain management functionality defined by the Fibre Channel standards (FC-SW2). For the purposes of this … |
| 1.3.6.1.4.1.9.9.305 | ciscoSystemExtMIB | 3 | 112 | MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on co… |
| 1.3.6.1.4.1.9.9.309 | ciscoIPIfMIB | 3 | 40 | The MIB module for configuring IP characteristics of the interfaces of a device. |
| 1.3.6.1.4.1.9.9.311 | ciscoEpmNotificationMIB | 3 | 48 | Notifications directly from hardware and software and processed notifications from various management applications can be furthe… |
| 1.3.6.1.4.1.9.9.312 | ciscoDataCollectionMIB | 3 | 84 | The MIB module allows a management application to select a set of MIB object instances whose values need to be collected on a per… |
| 1.3.6.1.4.1.9.9.313 | ciscoL2ControlMIB | 3 | 113 | The CISCO-L2-CONTROL-MIB is used to control some layer 2 functions, including MAC limit function and unicast flooding. This devi… |
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | 3 | 225 | The MIB module is an extension of CISCO-CAS-IF-MIB. It defines the attributes of a voice interface. |
| 1.3.6.1.4.1.9.9.315 | ciscoPortSecurityMIB | 3 | 89 | The MIB module for managing Cisco Port Security. |
| 1.3.6.1.4.1.9.9.317 | ciscoIscsiGwMIB | 3 | 145 | MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiat… |
| 1.3.6.1.4.1.9.9.318 | ciscoXgcpMIB | 3 | 120 | This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) … |
| 1.3.6.1.4.1.9.9.319 | ciscoPropAtmIfMIB | 3 | 57 | This MIB is designed for Propietary ATM (propAtm) interfaces. The propAtm interfaces are identified in the ifTable entries with if… |
| 1.3.6.1.4.1.9.9.322 | ccacSysMIB | 2 | 60 | This MIB module provides provisioning and monitoring Call Admission Control (CAC). |
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | 3 | 87 | This MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. COD… |
| 1.3.6.1.4.1.9.9.324 | ciscoMediaGatewayMIB | 3 | 107 | The MIB module for managing Trunk Media Gateway. A Media Gateway is a network element that provides conversion between the audio … |
| 1.3.6.1.4.1.9.9.325 | ciscoXgcpExtMIB | 2 | 65 | This MIB module is an extension to CISCO-XGCP-MIB. It defines the parameters related to the following aspects in xGCP protocols: *… |
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | 3 | 57 | This MIB defines the configuration and monitoring capabilities relating to local IP pools. Local IP pools have the following char… |
| 1.3.6.1.4.1.9.9.329 | ciscoFcipMgmtExtMIB | 3 | 75 | A MIB module for extending the CISCO-FCIP-MGMT-MIB to add objects which provide additional information about FCIP interfaces not … |
| 1.3.6.1.4.1.9.9.330 | ciscoSysInfoLogMIB | 3 | 44 | This MIB provides the configuration of System Information Logging feature, which allows a certain number of commands to be execut… |
| 1.3.6.1.4.1.9.9.331 | ciscoCsgMIB | 3 | 86 | This MIB supports the Cisco Content Services Gateway (CSG) product. It includes five traps and four tables that enable querying C… |
| 1.3.6.1.4.1.9.9.332 | ciscoGsp2MIB | 3 | 91 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.333 | ciscoGactMIB | 3 | 40 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.334 | ciscoGrtMIB | 3 | 150 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.335 | ciscoGsccpMIB | 3 | 293 | The MIB for signalling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP… |
| 1.3.6.1.4.1.9.9.336 | ciscoGspMIB | 3 | 273 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.339 | ciscoSecureShellMIB | 2 | 40 | MIB module for displaying and configuring accounting and Secure Shell (SSH) related features in a device. SSH is a program to log … |
| 1.3.6.1.4.1.9.9.340 | ciscoLreCpeMIB | 3 | 21 | The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND … |
| 1.3.6.1.4.1.9.9.341 | ciscoCableQosMonitorMIB | 3 | 57 | This is the MIB module for subscriber QoS monitoring for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Several subscrib… |
| 1.3.6.1.4.1.9.9.343 | ciscoAuthorizationStatsMibModule | 2 | 25 | The Cisco User Authorization Statistics MIB models counters and objects that are of management interest. |
| 1.3.6.1.4.1.9.9.344 | ciscoEntityDisplayMIB | 2 | 21 | This MIB module provides information about the status of display devices such as Light Emitting Diodes (LEDs) and alphanumeric di… |
| 1.3.6.1.4.1.9.9.350 | ciscoEntityDiagMIB | 3 | 139 | This MIB module defines the managed objects that describe the online diagnostics capabilities supported by the physical entities … |
| 1.3.6.1.4.1.9.9.351 | ciscoAtmTrunkMIB | 3 | 102 | The MIB for voice and Nx64 over ATM Trunking applications. The following lists the abbreviations used in this MIB: AAL ATM … |
| 1.3.6.1.4.1.9.9.356 | ciscoVoiceToneCadenceMIB | 3 | 30 | The MIB defines the attributes of the programmable tones specified in ITU-T E.180 Supplement 2. Each country has its own regulati… |
| 1.3.6.1.4.1.9.9.358 | ciscoBbsmMIB | 3 | 20 | This mib is designed to send BBSM specific notifications. There are variables that contain detail data that are bind to a notifi… |
| 1.3.6.1.4.1.9.9.359 | ciscoLicenseMIB | 3 | 52 | This MIB module provides objects to view the features and services that are licensed to run on a system (usually a network entity… |
| 1.3.6.1.4.1.9.9.360 | ciscoImageUpgradeMIB | 3 | 101 | This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and o… |
| 1.3.6.1.4.1.9.9.361 | ciscoCommonRolesMIB | 3 | 40 | MIB module for managing the common roles between access methods like Command Line Interface (CLI), SNMP and XML interfaces. Every … |
| 1.3.6.1.4.1.9.9.362 | ciscoPortStormControlMIB | 3 | 41 | The MIB module for managing Cisco Port Storm Control. |
| 1.3.6.1.4.1.9.9.363 | ciscoFcSpanMIB | 2 | 49 | MIB module for displaying and configuring Switched Port Analyzer(SPAN) related features in a Fibre Channel device. SPAN is a featu… |
| 1.3.6.1.4.1.9.9.364 | ciscoPsmMIB | 3 | 213 | The MIB module for the management of the Port Security Manager (PSM). The PSM consists of 2 aspects: Port binding and Fabric bindi… |
| 1.3.6.1.4.1.9.9.365 | ciscoFCCMIB | 3 | 42 | The MIB module for the management of Fibre Channel Congestion Control(FCC). FCC is a Cisco proprietary flow control mechanism tha… |
| 1.3.6.1.4.1.9.9.367 | ciscoAAAServerExtMIB | 2 | 77 | This MIB is an extension to the CISCO-AAA-SERVER-MIB. This MIB module enhances the 'casConfigTable' to include other types of Ser… |
| 1.3.6.1.4.1.9.9.368 | 368 | 0 | 0 | Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later |
| 1.3.6.1.4.1.9.9.369 | ciscoLicenseMgrMIB | 3 | 74 | The MIB module for a method of managing license files on the system. Licensing mechanism provides more flexibility in supporting v… |
| 1.3.6.1.4.1.9.9.370 | ciscoSslProxyMIB | 3 | 372 | This MIB module is for managing a Secure Socket Layer (SSL) Proxy device which terminates and accelarates SSL and Transport Layer… |
| 1.3.6.1.4.1.9.9.371 | ciscoIvrMIB | 3 | 192 | The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IV… |
| ... | ||||