Reference record for OID 1.3.6.1.4.1.9.9.360


parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
node code
360
node name
ciscoImageUpgradeMIB
dot oid
1.3.6.1.4.1.9.9.360
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoImageUpgradeMIB(360)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoImageUpgradeMIB
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/360

    Description by circitor

    This mib provides, objects to upgrade images on modules in the
    system, objects showing the status of the upgrade operation,
    and objects showing the type of images that could be run in the
    system. For example the modules could be Controller card, Line
    card .. etc.

    The system fills up the ciuImageVariableTable with the type of
    images the system can support. For performing an upgrade
    operation a management application must first read this table
    and use this info in other tables, as explained below.
    The ciuImageURITable table is also filled by the system and
    provides the image name presently running for each type of
    image in the system. The user is allowed to configure a new
    image name for each image type as listed in
    ciuImageVariableTable. The system would use this image on the
    particular module on the next reboot.

    The management application on deciding to do an upgrade
    operation must first check if an upgrade operation is already
    in progress in the system. This is done by reading the
    ciuUpgradeOpCommand and if it contains 'none', signifies that
    no other upgrade operation is in progress. Any other value,
    signifies that upgrade is in progress and a new upgrade
    operation is not allowed. To start an 'install' operation,
    first the user must perform a 'check' operation to do the
    version compatibility for the given set of image files
    (provided using the ciuImageLocInputTable) against the
    current system configuration. Only if the result of this
    operation is 'success' can the user proceed to do an install
    operation. The tables, ciuVersionCompChkTable,
    ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable,
    provide the result of the 'check' or 'install' operation
    performed using ciuUpgradeOpCommand. These tables are in
    addition to objects ciuUpgradeOpStatus,
    ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted,
    ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object
    provides the status of the selected upgrade operation.

    An option is available for user to upgrade only some modules,
    provided using ciuUpgradeTargetTable. If this table is empty
    than an upgrade operation would be performed on all the
    modules in the system.

    Parsed from file CISCO-IMAGE-UPGRADE-MIB.mib
    Module: CISCO-IMAGE-UPGRADE-MIB

    Description by mibdepot

    This mib provides, objects to upgrade images on modules in the
    system, objects showing the status of the upgrade operation,
    and objects showing the type of images that could be run in the
    system. For example the modules could be Controller card, Line
    card .. etc.

    The system fills up the ciuImageVariableTable with the type of
    images the system can support. For performing an upgrade
    operation a management application must first read this table
    and use this info in other tables, as explained below.
    The ciuImageURITable table is also filled by the system and
    provides the image name presently running for each type of
    image in the system. The user is allowed to configure a new
    image name for each image type as listed in
    ciuImageVariableTable. The system would use this image on the
    particular module on the next reboot.

    The management application on deciding to do an upgrade
    operation must first check if an upgrade operation is already
    in progress in the system. This is done by reading the
    ciuUpgradeOpCommand and if it contains 'none', signifies that
    no other upgrade operation is in progress. Any other value,
    signifies that upgrade is in progress and a new upgrade
    operation is not allowed. To start an 'install' operation,
    first the user must perform a 'check' operation to do the
    version compatibility for the given set of image files
    (provided using the ciuImageLocInputTable) against the
    current system configuration. Only if the result of this
    operation is 'success' can the user proceed to do an install
    operation. The tables, ciuVersionCompChkTable,
    ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable,
    provide the result of the 'check' or 'install' operation
    performed using ciuUpgradeOpCommand. These tables are in
    addition to objects ciuUpgradeOpStatus,
    ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted,
    ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object
    provides the status of the selected upgrade operation.

    An option is available for user to upgrade only some modules,
    provided using ciuUpgradeTargetTable. If this table is empty
    than an upgrade operation would be performed on all the
    modules in the system.

    Parsed from file CISCO-IMAGE-UPGRADE-MIB.my.txt
    Company: None
    Module: CISCO-IMAGE-UPGRADE-MIB

    Description by cisco

    This mib provides, objects to upgrade images on modules in the
    system, objects showing the status of the upgrade operation,
    and objects showing the type of images that could be run in the
    system. For example the modules could be Controller card, Line
    card .. etc.

    The system fills up the ciuImageVariableTable with the type of
    images the system can support. For performing an upgrade
    operation a management application must first read this table
    and use this info in other tables, as explained below.
    The ciuImageURITable table is also filled by the system and
    provides the image name presently running for each type of
    image in the system. The user is allowed to configure a new
    image name for each image type as listed in
    ciuImageVariableTable. The system would use this image on the
    particular module on the next reboot.

    The management application on deciding to do an upgrade
    operation must first check if an upgrade operation is already
    in progress in the system. This is done by reading the
    ciuUpgradeOpCommand and if it contains 'none', signifies that
    no other upgrade operation is in progress. Any other value,
    signifies that upgrade is in progress and a new upgrade
    operation is not allowed. To start an 'install' operation,
    first the user must perform a 'check' operation to do the
    version compatibility for the given set of image files
    (provided using the ciuImageLocInputTable) against the
    current system configuration. Only if the result of this
    operation is 'success' can the user proceed to do an install
    operation. The tables, ciuVersionCompChkTable,
    ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable,
    provide the result of the 'check' or 'install' operation
    performed using ciuUpgradeOpCommand. These tables are in
    addition to objects ciuUpgradeOpStatus,
    ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted,
    ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object
    provides the status of the selected upgrade operation.

    An option is available for user to upgrade only some modules,
    provided using ciuUpgradeTargetTable. If this table is empty
    than an upgrade operation would be performed on all the
    modules in the system.

    Information by circitor

    ciscoImageUpgradeMIB MODULE-IDENTITY LAST-UPDATED "200311040000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and objects showing the type of images that could be run in the system. For example the modules could be Controller card, Line card .. etc. The system fills up the ciuImageVariableTable with the type of images the system can support. For performing an upgrade operation a management application must first read this table and use this info in other tables, as explained below. The ciuImageURITable table is also filled by the system and provides the image name presently running for each type of image in the system. The user is allowed to configure a new image name for each image type as listed in ciuImageVariableTable. The system would use this image on the particular module on the next reboot. The management application on deciding to do an upgrade operation must first check if an upgrade operation is already in progress in the system. This is done by reading the ciuUpgradeOpCommand and if it contains 'none', signifies that no other upgrade operation is in progress. Any other value, signifies that upgrade is in progress and a new upgrade operation is not allowed. To start an 'install' operation, first the user must perform a 'check' operation to do the version compatibility for the given set of image files (provided using the ciuImageLocInputTable) against the current system configuration. Only if the result of this operation is 'success' can the user proceed to do an install operation. The tables, ciuVersionCompChkTable, ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable, provide the result of the 'check' or 'install' operation performed using ciuUpgradeOpCommand. These tables are in addition to objects ciuUpgradeOpStatus, ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted, ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object provides the status of the selected upgrade operation. An option is available for user to upgrade only some modules, provided using ciuUpgradeTargetTable. If this table is empty than an upgrade operation would be performed on all the modules in the system." REVISION "200311040000Z" DESCRIPTION "Updated compliance statement. Removed ciuImageLocInputGroup from conditionally mandatory." REVISION "200310280000Z" DESCRIPTION "Added ciuUpgradeMiscInfoTable. Added more enums to ciuUpgradeOpStatusOperation. Added ciuUpgradeMiscInfoGroup, deprecated ciuImageUpgradeComplianceRev1 and added ciuImageUpgradeComplianceRev2." REVISION "200307110000Z" DESCRIPTION "Changed: ciuImageLocInputURI identifier from 2 to 1, ciuImageLocInputEntryStatus identifier from 3 to 2 and ciuImageVariableName from 2 to 1. Added recommendedAction to ciuUpgradeOpStatusOperation." REVISION "200307080000Z" DESCRIPTION "Added ciscoImageUpgradeMisc, added ciuUpgradeMiscAutoCopy under the group ciscoImageUpgradeMisc. Added ciuUpgradeMiscGroup, deprecated ciuImageUpgradeCompliance and added ciuImageUpgradeComplianceReve1." REVISION "200306010000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 360 }

    Information by cisco_v1

    ciscoImageUpgradeMIB OBJECT IDENTIFIER ::= { ciscoMgmt 360 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-IMAGE-UPGRADE-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoImageUpgradeMIB MODULE-IDENTITY LAST-UPDATED "201103280000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and objects showing the type of images that could be run in the system. For example the modules could be Controller card, Line card .. etc. The system fills up the ciuImageVariableTable with the type of images the system can support. For performing an upgrade operation a management application must first read this table and use this info in other tables, as explained below. The ciuImageURITable table is also filled by the system and provides the image name presently running for each type of image in the system. The user is allowed to configure a new image name for each image type as listed in ciuImageVariableTable. The system would use this image on the particular module on the next reboot. The management application on deciding to do an upgrade operation must first check if an upgrade operation is already in progress in the system. This is done by reading the ciuUpgradeOpCommand and if it contains 'none', signifies that no other upgrade operation is in progress. Any other value, signifies that upgrade is in progress and a new upgrade operation is not allowed. To start an 'install' operation, first the user must perform a 'check' operation to do the version compatibility for the given set of image files (provided using the ciuImageLocInputTable) against the current system configuration. Only if the result of this operation is 'success' can the user proceed to do an install operation. The tables, ciuVersionCompChkTable, ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable, provide the result of the 'check' or 'install' operation performed using ciuUpgradeOpCommand. These tables are in addition to objects ciuUpgradeOpStatus, ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted, ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object provides the status of the selected upgrade operation. An option is available for user to upgrade only some modules, provided using ciuUpgradeTargetTable. If this table is empty than an upgrade operation would be performed on all the modules in the system." REVISION "201103280000Z" DESCRIPTION "Added new group ciuUpgradeOpNewGroup. Added new enum 'systemPreupgradeBegin' to ciuUpgradeOpStatusOperation. Added ciuUpgradeOpLastCommand and ciuUpgradeOpLastStatus to the varbind list of ciuUpgradeOpCompletionNotify. Added new compliance ciuImageUpgradeComplianceRev4 and deprecated ciuImageUpgradeComplianceRev3. Added ciuUpgradeJobStatusNotifyOnCompletion." REVISION "200803180000Z" DESCRIPTION "Added new enum 'compactFlashTcamSanity' to ciuUpgradeOpStatusOperation." REVISION "200707180000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatusOperation." REVISION "200612210000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatus and ciuUpgradeOpStatusOperation. Added new trap ciuUpgradeJobStatusNotify. Changed type for ciuUpgradeOpStatusModule to EntPhysicalIndexOrZero. Added ciuUpgradeNotificationGroupSup group, deprecated ciuImageUpgradeComplianceRev2 and added ciuImageUpgradeComplianceRev3 " REVISION "200401200000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatus and ciuUpgradeOpStatusOperation. Corrected description for 'configSync' enum defined in ciuUpgradeOpStatusOperation object. " REVISION "200311040000Z" DESCRIPTION "Updated compliance statement. Removed ciuImageLocInputGroup from conditionally mandatory." REVISION "200310280000Z" DESCRIPTION "Added ciuUpgradeMiscInfoTable. Added more enums to ciuUpgradeOpStatusOperation. Added ciuUpgradeMiscInfoGroup, deprecated ciuImageUpgradeComplianceRev1 and added ciuImageUpgradeComplianceRev2." REVISION "200307110000Z" DESCRIPTION "Changed: ciuImageLocInputURI identifier from 2 to 1, ciuImageLocInputEntryStatus identifier from 3 to 2 and ciuImageVariableName from 2 to 1. Added recommendedAction to ciuUpgradeOpStatusOperation." REVISION "200307080000Z" DESCRIPTION "Added ciscoImageUpgradeMisc, added ciuUpgradeMiscAutoCopy under the group ciscoImageUpgradeMisc. Added ciuUpgradeMiscGroup, deprecated ciuImageUpgradeCompliance and added ciuImageUpgradeComplianceReve1." REVISION "200306010000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 360 }

    Information by cisco

    ciscoImageUpgradeMIB MODULE-IDENTITY LAST-UPDATED "201103280000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and objects showing the type of images that could be run in the system. For example the modules could be Controller card, Line card .. etc. The system fills up the ciuImageVariableTable with the type of images the system can support. For performing an upgrade operation a management application must first read this table and use this info in other tables, as explained below. The ciuImageURITable table is also filled by the system and provides the image name presently running for each type of image in the system. The user is allowed to configure a new image name for each image type as listed in ciuImageVariableTable. The system would use this image on the particular module on the next reboot. The management application on deciding to do an upgrade operation must first check if an upgrade operation is already in progress in the system. This is done by reading the ciuUpgradeOpCommand and if it contains 'none', signifies that no other upgrade operation is in progress. Any other value, signifies that upgrade is in progress and a new upgrade operation is not allowed. To start an 'install' operation, first the user must perform a 'check' operation to do the version compatibility for the given set of image files (provided using the ciuImageLocInputTable) against the current system configuration. Only if the result of this operation is 'success' can the user proceed to do an install operation. The tables, ciuVersionCompChkTable, ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable, provide the result of the 'check' or 'install' operation performed using ciuUpgradeOpCommand. These tables are in addition to objects ciuUpgradeOpStatus, ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted, ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object provides the status of the selected upgrade operation. An option is available for user to upgrade only some modules, provided using ciuUpgradeTargetTable. If this table is empty than an upgrade operation would be performed on all the modules in the system." REVISION "201103280000Z" DESCRIPTION "Added new group ciuUpgradeOpNewGroup. Added new enum 'systemPreupgradeBegin' to ciuUpgradeOpStatusOperation. Added ciuUpgradeOpLastCommand and ciuUpgradeOpLastStatus to the varbind list of ciuUpgradeOpCompletionNotify. Added new compliance ciuImageUpgradeComplianceRev4 and deprecated ciuImageUpgradeComplianceRev3. Added ciuUpgradeJobStatusNotifyOnCompletion." REVISION "200803180000Z" DESCRIPTION "Added new enum 'compactFlashTcamSanity' to ciuUpgradeOpStatusOperation." REVISION "200707180000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatusOperation." REVISION "200612210000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatus and ciuUpgradeOpStatusOperation. Added new trap ciuUpgradeJobStatusNotify. Changed type for ciuUpgradeOpStatusModule to EntPhysicalIndexOrZero. Added ciuUpgradeNotificationGroupSup group, deprecated ciuImageUpgradeComplianceRev2 and added ciuImageUpgradeComplianceRev3 " REVISION "200401200000Z" DESCRIPTION "Added new enums to ciuUpgradeOpStatus and ciuUpgradeOpStatusOperation. Corrected description for 'configSync' enum defined in ciuUpgradeOpStatusOperation object. " REVISION "200311040000Z" DESCRIPTION "Updated compliance statement. Removed ciuImageLocInputGroup from conditionally mandatory." REVISION "200310280000Z" DESCRIPTION "Added ciuUpgradeMiscInfoTable. Added more enums to ciuUpgradeOpStatusOperation. Added ciuUpgradeMiscInfoGroup, deprecated ciuImageUpgradeComplianceRev1 and added ciuImageUpgradeComplianceRev2." REVISION "200307110000Z" DESCRIPTION "Changed: ciuImageLocInputURI identifier from 2 to 1, ciuImageLocInputEntryStatus identifier from 3 to 2 and ciuImageVariableName from 2 to 1. Added recommendedAction to ciuUpgradeOpStatusOperation." REVISION "200307080000Z" DESCRIPTION "Added ciscoImageUpgradeMisc, added ciuUpgradeMiscAutoCopy under the group ciscoImageUpgradeMisc. Added ciuUpgradeMiscGroup, deprecated ciuImageUpgradeCompliance and added ciuImageUpgradeComplianceReve1." REVISION "200306010000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 360 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.360.0 ciscoImageUpgradeMIBNotifs 2 2 None
    1.3.6.1.4.1.9.9.360.1 ciscoImageUpgradeMIBObjects 1 75 None
    1.3.6.1.4.1.9.9.360.2 ciscoImageUpgradeMIBConform 2 21 None

    Brothers (645)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.9.9.311 ciscoEpmNotificationMIB 3 48 Notifications directly from hardware and software and processed
    notifications from various management applications can be furthe…
    1.3.6.1.4.1.9.9.312 ciscoDataCollectionMIB 3 84 The MIB module allows a management application to
    select a set of MIB object instances whose values need
    to be collected on a per…
    1.3.6.1.4.1.9.9.313 ciscoL2ControlMIB 3 113 The CISCO-L2-CONTROL-MIB is used to control some layer 2
    functions, including MAC limit function and unicast
    flooding. This devi…
    1.3.6.1.4.1.9.9.314 ciscoCasIfExtMIB 3 225 The MIB module is an extension of CISCO-CAS-IF-MIB.
    It defines the attributes of a voice interface.
    1.3.6.1.4.1.9.9.315 ciscoPortSecurityMIB 3 89 The MIB module for managing Cisco Port Security.
    1.3.6.1.4.1.9.9.317 ciscoIscsiGwMIB 3 145 MIB module for monitoring and configuring iSCSI
    gateway functions. An iSCSI gateway represents FC
    (Fibre Channel) targets/initiat…
    1.3.6.1.4.1.9.9.318 ciscoXgcpMIB 3 120 This MIB is an enhancement for existing XGCP-MIB.

    xGCP is a set of protocols, for example SGCP (Simple
    Gateway Control Protocol) …
    1.3.6.1.4.1.9.9.319 ciscoPropAtmIfMIB 3 57 This MIB is designed for Propietary ATM (propAtm)
    interfaces.
    The propAtm interfaces are identified in the ifTable
    entries with if…
    1.3.6.1.4.1.9.9.321 ciscoMgcMIB 3 43 This MIB is used to support MGC(call agent) and
    MGC Group configuration.
    The MGC or MGC group configuration is performed
    under a s…
    1.3.6.1.4.1.9.9.322 ccacSysMIB 2 60 This MIB module provides provisioning and
    monitoring Call Admission Control (CAC).
    1.3.6.1.4.1.9.9.323 ciscoVoiceAalxProfileMIB 3 87 This MIB defines the objects specific to voice
    over ATM or voice over IP. Those objects are
    related to the following areas:
    1. COD…
    1.3.6.1.4.1.9.9.324 ciscoMediaGatewayMIB 3 107 The MIB module for managing Trunk Media Gateway.

    A Media Gateway is a network element that provides conversion
    between the audio …
    1.3.6.1.4.1.9.9.325 ciscoXgcpExtMIB 2 65 This MIB module is an extension to CISCO-XGCP-MIB.

    It defines the parameters related to the following
    aspects in xGCP protocols:
    *…
    1.3.6.1.4.1.9.9.326 ciscoIpLocalPoolMIB 3 57 This MIB defines the configuration and monitoring capabilities
    relating to local IP pools.

    Local IP pools have the following char…
    1.3.6.1.4.1.9.9.329 ciscoFcipMgmtExtMIB 3 75 A MIB module for extending the CISCO-FCIP-MGMT-MIB
    to add objects which provide additional information
    about FCIP interfaces not …
    1.3.6.1.4.1.9.9.330 ciscoSysInfoLogMIB 3 44 This MIB provides the configuration of System Information
    Logging feature, which allows a certain number of commands
    to be execut…
    1.3.6.1.4.1.9.9.331 ciscoCsgMIB 3 86 This MIB supports the Cisco Content Services Gateway
    (CSG) product. It includes five traps and four tables
    that enable querying C…
    1.3.6.1.4.1.9.9.332 ciscoGsp2MIB 3 91 The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    signalling System No. 7(SS7) Network.
    This…
    1.3.6.1.4.1.9.9.333 ciscoGactMIB 3 40 The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    Signalling System No. 7(SS7) Network.
    This…
    1.3.6.1.4.1.9.9.334 ciscoGrtMIB 3 150 This MIB is for managing information required to
    route messages transported over Signalling System
    No. 7 (SS7) Network via Cisco …
    1.3.6.1.4.1.9.9.335 ciscoGsccpMIB 3 293 The MIB for signalling Connection Control Part(SCCP)
    messages transported over Signalling System
    No. 7 (SS7) Network via Cisco IP…
    1.3.6.1.4.1.9.9.336 ciscoGspMIB 3 273 The MIB for managing Signalling Points and its
    associated messages transported over Signalling
    System No. 7 (SS7) Network via Ci…
    1.3.6.1.4.1.9.9.339 ciscoSecureShellMIB 2 40 MIB module for displaying and configuring
    accounting and Secure Shell (SSH) related
    features in a device.

    SSH is a program to log …
    1.3.6.1.4.1.9.9.340 ciscoLreCpeMIB 3 21 The MIB module for the Cisco Long Reach Ethernet
    Customer Premise Equipment device information.

    *** ABBREVIATIONS, ACRONYMS, AND …
    1.3.6.1.4.1.9.9.341 ciscoCableQosMonitorMIB 3 57 This is the MIB module for subscriber QoS monitoring
    for DOCSIS-compliant Cable Modem Termination Systems
    (CMTS).

    Several subscrib…
    1.3.6.1.4.1.9.9.343 ciscoAuthorizationStatsMibModule 2 25 The Cisco User Authorization Statistics MIB models
    counters and objects that are of management
    interest.
    1.3.6.1.4.1.9.9.344 ciscoEntityDisplayMIB 2 21 This MIB module provides information about the
    status of display devices such as Light Emitting
    Diodes (LEDs) and alphanumeric di…
    1.3.6.1.4.1.9.9.350 ciscoEntityDiagMIB 3 139 This MIB module defines the managed objects that describe the
    online diagnostics capabilities supported by the
    physical entities …
    1.3.6.1.4.1.9.9.351 ciscoAtmTrunkMIB 3 102 The MIB for voice and Nx64 over ATM Trunking applications.

    The following lists the abbreviations used in this MIB:
    AAL ATM …
    1.3.6.1.4.1.9.9.356 ciscoVoiceToneCadenceMIB 3 30 The MIB defines the attributes of the programmable
    tones specified in ITU-T E.180 Supplement 2.

    Each country has its own regulati…
    1.3.6.1.4.1.9.9.358 ciscoBbsmMIB 3 20 This mib is designed to send BBSM specific
    notifications. There are variables that contain detail data
    that are bind to a notifi…
    1.3.6.1.4.1.9.9.359 ciscoLicenseMIB 3 52 This MIB module provides objects to view the features
    and services that are licensed to run on a system (usually
    a network entity…
    1.3.6.1.4.1.9.9.361 ciscoCommonRolesMIB 3 40 MIB module for managing the common roles between
    access methods like Command Line Interface (CLI), SNMP
    and XML interfaces.
    Every …
    1.3.6.1.4.1.9.9.362 ciscoPortStormControlMIB 3 41 The MIB module for managing Cisco Port Storm Control.
    1.3.6.1.4.1.9.9.363 ciscoFcSpanMIB 2 49 MIB module for displaying and configuring
    Switched Port Analyzer(SPAN) related features
    in a Fibre Channel device.

    SPAN is a featu…
    1.3.6.1.4.1.9.9.364 ciscoPsmMIB 3 213 The MIB module for the management of the
    Port Security Manager (PSM). The PSM
    consists of 2 aspects: Port binding and
    Fabric bindi…
    1.3.6.1.4.1.9.9.365 ciscoFCCMIB 3 42 The MIB module for the management of Fibre Channel
    Congestion Control(FCC). FCC is a Cisco proprietary
    flow control mechanism tha…
    1.3.6.1.4.1.9.9.367 ciscoAAAServerExtMIB 2 77 This MIB is an extension to the CISCO-AAA-SERVER-MIB.
    This MIB module enhances the 'casConfigTable' to
    include other types of Ser…
    1.3.6.1.4.1.9.9.368 368 0 0 Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later
    1.3.6.1.4.1.9.9.369 ciscoLicenseMgrMIB 3 74 The MIB module for a method of managing license files on
    the system.
    Licensing mechanism provides more flexibility in supporting
    v…
    1.3.6.1.4.1.9.9.370 ciscoSslProxyMIB 3 372 This MIB module is for managing a Secure Socket Layer
    (SSL) Proxy device which terminates and accelarates
    SSL and Transport Layer…
    1.3.6.1.4.1.9.9.371 ciscoIvrMIB 3 192 The MIB module for the management of Inter-VSAN
    routing within the framework of Cisco's
    Inter-VSAN Routing (IVR) Architecture. IV…
    1.3.6.1.4.1.9.9.372 ciscoIsnsClientMIB 3 16 MIB module for monitoring and configuring Internet
    Storage Name Service (iSNS) client.
    1.3.6.1.4.1.9.9.373 ciscoFdmiMIB 3 47 Fabric Device Management Interface (FDMI) MIB. This MIB
    module defines objects for managing the devices such as
    HBA (Host Bus Ada…
    1.3.6.1.4.1.9.9.374 ciscoDynamicArpInspectionMIB 3 82 The MIB module is for configuration of Dynamic ARP Inspection
    feature. Dynamic ARP Inspection is a security mechanism which
    valid…
    1.3.6.1.4.1.9.9.375 ciscoFiconMIB 3 176 This is the FICON (FIber CONnection) MIB module.

    FICON is an IBM standard of transport mechanism
    for communication between the ma…
    1.3.6.1.4.1.9.9.376 ciscoSVIAutostateMIB 3 19 The MIB module is for configuration of the switch virtual
    interface (SVI) autostate feature. Autostate feature
    is a mechanism to …
    1.3.6.1.4.1.9.9.377 ciscoFeatureCtrlMIB 3 53 There are two types of features in the system:

    - Regular features
    - Optional features

    The Regular features may or may not need to …
    1.3.6.1.4.1.9.9.378 ciscoSvcInterfaceMIB 3 115 MIB module for displaying and configuring
    SVC (SAN Volume Controller) related features
    in the Storage Area Network (SAN) switches…
    1.3.6.1.4.1.9.9.379 ciscoItpmMIB 3 47 The MIB for providing information related to
    monitoring SS7 links.

    This information can be used to manage the state
    of software u…
    1.3.6.1.4.1.9.9.380 ciscoDhcpSnoopingMIB 3 127 The MIB module is for configuration of DHCP Snooping
    feature. DHCP Snooping is a security mechanism which
    uses information gleane…
    1.3.6.1.4.1.9.9.381 ciscoDiffServExtMIB 2 49 This MIB is a Cisco extension to the
    DIFFSERV-MIB, RFC 3289. This MIB defines
    a Fibre Channel (FC) Multi Field filter to
    be used i…
    1.3.6.1.4.1.9.9.383 ciscoCidsMIB 3 183 Cisco Intrusion Detection System MIB. Provides
    trap definitions for the evAlert and evError
    elements of the IDIOM (Intrusion Det…
    1.3.6.1.4.1.9.9.384 ciscoDot11AntennaMIB 2 11 This MIB is intended to be implemented on 802.11
    Access Points and Wireless Bridges to provide
    information about the antennas con…
    1.3.6.1.4.1.9.9.385 ciscoUnityMIB 3 101 The MIB Module for the management of Cisco Unity server.
    Cisco Unity is a Unified Communications solution that provides
    advanced,…
    1.3.6.1.4.1.9.9.386 ciscoModuleAutoShutdownMIB 3 36 The CISCO-MODULE-AUTO-SHUTDOWN-MIB is used to configure
    the module automatic shutdown feature. Modules will be
    reset by the syste…
    1.3.6.1.4.1.9.9.387 ciscoNetflowMIB 3 206 The Netflow MIB provides a simple and easy method
    to get NetFlow cache information, current NetFlow
    configuration and statistics.…
    1.3.6.1.4.1.9.9.388 ciscoVirtualSwitchMIB 3 128 This MIB module defines the managed objects that support the
    virtual switch architecture.

    The virtual switch concept combines sev…
    1.3.6.1.4.1.9.9.389 ciscoVoiceCasModuleMIB 3 22 This MIB is used to support Programmable
    CAS signaling Bit configuration on modules
    that support voice traffic.

    This MIB will enab…
    1.3.6.1.4.1.9.9.390 ciscoCableDiagMIB 3 33 This MIB module defines objects for managing cable
    diagnostic test capabilites supported by the Cisco devices.

    Cable diagnostic t…
    1.3.6.1.4.1.9.9.391 ciscoFcspMIB 3 46 MIB module for managing Fibre Channel Security for the
    fibre channel devices.

    This MIB is used to configure and monitor the
    Fibre-…
    1.3.6.1.4.1.9.9.392 ciscoRemoteAccessMonitorMIB 3 199 Acronyms and Definitions
    The following acronyms and terms are used in this
    document:

    IPSec: Secure IP Protocol

    VPN: Virtual Priv…
    1.3.6.1.4.1.9.9.393 ciscoVoiceConnectivityMIB 3 44 This MIB module provides connectivity related
    information for devices (e.g., 'connectivity between
    voice gateway, phones, gatekee…
    1.3.6.1.4.1.9.9.394 ciscoIpTapMIB 3 28 This module manages Cisco's intercept feature for IP.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept IP traffic. CISCO-T…
    1.3.6.1.4.1.9.9.395 cisco802TapMIB 3 20 This module manages Cisco's intercept feature for
    802 (layer 2) streams.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept 8…
    1.3.6.1.4.1.9.9.396 ciscoMlrMIB 3 190 The MIB for providing information about Multi-layer
    Routing(MLR). This MIB will provide information used to
    control and measure S…
    1.3.6.1.4.1.9.9.397 ciscoH225MIB 1 176 Cisco H225 MIB module. This module consists of H225
    call signaling and H225 RAS (Registration, Admission
    and Status). These are p…
    1.3.6.1.4.1.9.9.398 ciscoMauExtMIB 3 23 A MIB module for extending the MAU-MIB (RFC 3636)
    to add objects which provide additional management
    information about MAU or Jac…
    1.3.6.1.4.1.9.9.399 ciscoTap2MIB 3 69 This module manages Cisco's intercept feature.
    This MIB replaces CISCO-TAP-MIB. This MIB defines
    a generic stream table that cont…
    1.3.6.1.4.1.9.9.400 ciscoUserConnectionTapMIB 2 13 This module manages Cisco's intercept feature for
    user connections.

    This MIB is used along with CISCO-TAP2-MIB to
    intercept user t…
    1.3.6.1.4.1.9.9.401 ciscoBridgeExtMIB 3 34 A MIB module for extending BRIDGE-MIB specified in RFC 1493.
    1.3.6.1.4.1.9.9.402 ciscoPowerEthernetExtMIB 3 79 A MIB module for extending the POWER-ETHERNET-MIB
    (RFC3621) to add objects which provide additional
    management information about …
    1.3.6.1.4.1.9.9.405 ciscoDnsServerMIB 3 400 The MIB module for entities implementing the server side
    of the Domain Name System (DNS) protocol.
    P. Mockapetris, 'Domain names …
    1.3.6.1.4.1.9.9.407 ciscoAtmTrunkStatMIB 3 101 The MIB module contains ATM Trunk statistics.

    TERMINOLOGY

    PVC: Permanent Virtual Circuit
    OAM: Operation and Management
    CRC: Cyclic…
    1.3.6.1.4.1.9.9.408 ciscoSnmpNotificationExtMIB 3 13 This MIB extends the functionality provided
    by SNMP-NOTIFICATION-MIB.
    This MIB provides for the aging of the
    notification filters …
    1.3.6.1.4.1.9.9.409 ciscoSnmpVacmExtMIB 2 11 The management information definitions to extend
    the View-based Access Control Model (RFC3415) for
    SNMP.

    This MIB extends the 'SN…
    ...