Reference record for OID 1.3.6.1.4.1.9.9.332


parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
node code
332
node name
ciscoGsp2MIB
dot oid
1.3.6.1.4.1.9.9.332
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoGsp2MIB(332)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoGsp2MIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoGsp2MIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoGsp2MIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoGsp2MIB
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoGsp2MIB
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoGsp2MIB
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/332

    Description by circitor

    The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    signalling System No. 7(SS7) Network.
    This information can be used to manage messages
    transported over SS7 Network via Cisco IP
    Transfer Point.

    The Cisco IP Transfer Point (ITP) is a hardware
    and software solution that transports SS7 traffic
    using IP. Each ITP node provides function similar
    to SS7 signalling point.

    The relevant ITU documents describing this technology
    is the ITU Q series, including ITU Q.700: Introduction
    to CCITT signalling System No. 7 and ITU Q.701
    Functional description of the message transfer part
    (MTP) of signalling System No. 7.

    The ITP Quality of Service (QoS) model allows the
    definition of 8 QoS classes, 0 through 7.
    QoS classes can be assigned only SCTP links.
    Only one QoS class can be assigned to an SCTP link.
    Class 0 will be designated as the default class.
    Packets that are not classified to a designated QoS
    class will get assigned to the default class. Each
    provisioned QoS class can be assigned an IP precedence
    value or a Differential Services Code Point (DSCP).
    The default class is initialized to IP precedence
    zero (0). The default class initial TOS setting can
    be changed through the command line interface. The
    Type of Service (TOS) byte in the IP header will be
    set to the IP precedence or DSCP that is assigned to
    class. Every packet forwarded over an SCTP link that
    was provisioned for a given QoS class will have the
    TOS byte set.

    Parsed from file CISCO-ITP-GSP2-MIB.mib
    Module: CISCO-ITP-GSP2-MIB

    Description by mibdepot

    The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    signalling System No. 7(SS7) Network.
    This information can be used to manage messages
    transported over SS7 Network via Cisco IP
    Transfer Point.

    The Cisco IP Transfer Point (ITP) is a hardware
    and software solution that transports SS7 traffic
    using IP. Each ITP node provides function similar
    to SS7 signalling point.

    The relevant ITU documents describing this technology
    is the ITU Q series, including ITU Q.700: Introduction
    to CCITT signalling System No. 7 and ITU Q.701
    Functional description of the message transfer part
    (MTP) of signalling System No. 7.

    The ITP Quality of Service (QoS) model allows the
    definition of 8 QoS classes, 0 through 7.
    QoS classes can be assigned only SCTP links.
    Only one QoS class can be assigned to an SCTP link.
    Class 0 will be designated as the default class.
    Packets that are not classified to a designated QoS
    class will get assigned to the default class. Each
    provisioned QoS class can be assigned an IP precedence
    value or a Differential Services Code Point (DSCP).
    The default class is initialized to IP precedence
    zero (0). The default class initial TOS setting can
    be changed through the command line interface. The
    Type of Service (TOS) byte in the IP header will be
    set to the IP precedence or DSCP that is assigned to
    class. Every packet forwarded over an SCTP link that
    was provisioned for a given QoS class will have the
    TOS byte set.

    Parsed from file CISCO-ITP-GSP2-MIB.my.txt
    Company: None
    Module: CISCO-ITP-GSP2-MIB

    Description by cisco

    The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    signalling System No. 7(SS7) Network.
    This information can be used to manage messages
    transported over SS7 Network via Cisco IP
    Transfer Point.

    The Cisco IP Transfer Point (ITP) is a hardware
    and software solution that transports SS7 traffic
    using IP. Each ITP node provides function similar
    to SS7 signalling point.

    The relevant ITU documents describing this technology
    is the ITU Q series, including ITU Q.700: Introduction
    to CCITT signalling System No. 7 and ITU Q.701
    Functional description of the message transfer part
    (MTP) of signalling System No. 7.

    The ITP Quality of Service (QoS) model allows the
    definition of 8 QoS classes, 0 through 7.
    QoS classes can be assigned only SCTP links.
    Only one QoS class can be assigned to an SCTP link.
    Class 0 will be designated as the default class.
    Packets that are not classified to a designated QoS
    class will get assigned to the default class. Each
    provisioned QoS class can be assigned an IP precedence
    value or a Differential Services Code Point (DSCP).
    The default class is initialized to IP precedence
    zero (0). The default class initial TOS setting can
    be changed through the command line interface. The
    Type of Service (TOS) byte in the IP header will be
    set to the IP precedence or DSCP that is assigned to
    class. Every packet forwarded over an SCTP link that
    was provisioned for a given QoS class will have the
    TOS byte set.

    Information by circitor

    ciscoGsp2MIB MODULE-IDENTITY LAST-UPDATED "200303030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set. " REVISION "200303030000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 332 }

    Information by cisco_v1

    ciscoGsp2MIB OBJECT IDENTIFIER ::= { ciscoMgmt 332 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-ITP-GSP2-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoGsp2MIB MODULE-IDENTITY LAST-UPDATED "200807090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set." REVISION "200807090000Z" DESCRIPTION "Added Context Table for Probless Monitor feature." REVISION "200712180000Z" DESCRIPTION "Added Processor Number to cgsp2LocalPeerTable for SAMI interfaces." REVISION "200405260000Z" DESCRIPTION "Added following object to provide information related to Non-stop Operations function. cgsp2OperMtp3Offload, cgsp2OperRedundancy" REVISION "200308070000Z" DESCRIPTION "Add new table to support MTP3 errors" REVISION "200303030000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 332 }

    Information by cisco

    ciscoGsp2MIB MODULE-IDENTITY LAST-UPDATED "200807090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set." REVISION "200807090000Z" DESCRIPTION "Added Context Table for Probless Monitor feature." REVISION "200712180000Z" DESCRIPTION "Added Processor Number to cgsp2LocalPeerTable for SAMI interfaces." REVISION "200405260000Z" DESCRIPTION "Added following object to provide information related to Non-stop Operations function. cgsp2OperMtp3Offload, cgsp2OperRedundancy" REVISION "200308070000Z" DESCRIPTION "Add new table to support MTP3 errors" REVISION "200303030000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 332 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.332.0 ciscoGsp2MIBNotifs 0 0 None
    1.3.6.1.4.1.9.9.332.1 ciscoGsp2MIBObjects 6 74 None
    1.3.6.1.4.1.9.9.332.2 ciscoGsp2MIBConform 2 14 None

    Brothers (645)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.9.9.282 ciscoVsanMIB 2 104 The MIB module for the management of the Virtual Storage
    Networks (VSANs) within the frame work of Cisco's VSAN
    Architecture. T…
    1.3.6.1.4.1.9.9.284 ciscoFcRouteMIB 2 55 The MIB module for configuring and displaying FC (Fibre
    Channel) Route Information.
    1.3.6.1.4.1.9.9.285 ciscoPortChannelMIB 2 40 The MIB module for management of Port Channel ports.
    In addition to this MIB, CISCO-FC-FE-MIB and interface
    mib (rfc2863) will al…
    1.3.6.1.4.1.9.9.286 ciscoWwnmgrMIB 2 38 The World Wide Name (WWN) in the fibre channel networking
    technology is equivalent to the MAC address in Ethernet.
    There are six …
    1.3.6.1.4.1.9.9.287 ciscoFspfMIB 4 95 Fabric Shortest Path First (FSPF) MIB.
    1.3.6.1.4.1.9.9.288 ciscoRadiusMIB 3 91 MIB module for monitoring and configuring
    authentication and logging services using RADIUS
    (Remote Authentication Dial In User Se…
    1.3.6.1.4.1.9.9.289 ciscoFcFeMIB 2 315 This is the Cisco fibre element management MIB module.
    It covers:
    - Cisco extension to the interface MIB ( IF-MIB )
    - Contains all…
    1.3.6.1.4.1.9.9.290 ciscoVirtualNwIfMIB 2 22 The MIB module for management of virtual network
    interfaces to VSAN and VLAN.
    1.3.6.1.4.1.9.9.292 ciscoRscnMIB 2 67 The MIB module for the management of the Fibre
    Channel's Registered State Change Notification
    (RSCN) functionality, which is spec…
    1.3.6.1.4.1.9.9.293 ciscoNsMIB 2 67 The MIB module for the management of the Cisco
    Name Server which realizes the FC-GS3
    requirements for Name Server (NS).
    1.3.6.1.4.1.9.9.294 ciscoZsMIB 2 254 The MIB module for the management of zoning within
    the framework of Cisco's Zoning Server (ZS) Archi-
    tecture which realizes the …
    1.3.6.1.4.1.9.9.295 ciscoFcPingMIB 2 37 The MIB module for the management of the
    Fibre Channel Ping functionality.
    1.3.6.1.4.1.9.9.296 ciscoFcTraceRouteMIB 2 31 The MIB module for the management of the
    Fibre Channel Trace Route functionality.
    1.3.6.1.4.1.9.9.297 ciscoFcsMIB 2 122 The MIB module for the management of a Fabric
    Configuration Server (FCS). An FCS is defined
    by the FC-GS3 standard. This MIB ena…
    1.3.6.1.4.1.9.9.299 ciscoExtScsiMIB 2 68 The Cisco extension to CISCO-SCSI-MIB
    which is a copy of the Internet draft,
    the SCSI-MIB, from the IETF.

    Glossary of terms used i…
    1.3.6.1.4.1.9.9.300 ciscoCallHomeMIB 3 324 The MIB module for the management of Call Home feature
    within the framework of Cisco's Call Home architecture.
    Customers deployin…
    1.3.6.1.4.1.9.9.301 ciscoSyslogExtMIB 2 44 MIB module for configuring and monitoring System Log
    related management parameters as defined by RFC 3164.
    1.3.6.1.4.1.9.9.302 ciscoDmMIB 2 85 The MIB module for the domain management functionality
    defined by the Fibre Channel standards (FC-SW2). For the
    purposes of this …
    1.3.6.1.4.1.9.9.305 ciscoSystemExtMIB 3 112 MIB module for monitoring High Availability, SNMP SET
    errors and bandwidths. This mib module also provides the
    information on co…
    1.3.6.1.4.1.9.9.309 ciscoIPIfMIB 3 40 The MIB module for configuring IP characteristics
    of the interfaces of a device.
    1.3.6.1.4.1.9.9.311 ciscoEpmNotificationMIB 3 48 Notifications directly from hardware and software and processed
    notifications from various management applications can be furthe…
    1.3.6.1.4.1.9.9.312 ciscoDataCollectionMIB 3 84 The MIB module allows a management application to
    select a set of MIB object instances whose values need
    to be collected on a per…
    1.3.6.1.4.1.9.9.313 ciscoL2ControlMIB 3 113 The CISCO-L2-CONTROL-MIB is used to control some layer 2
    functions, including MAC limit function and unicast
    flooding. This devi…
    1.3.6.1.4.1.9.9.314 ciscoCasIfExtMIB 3 225 The MIB module is an extension of CISCO-CAS-IF-MIB.
    It defines the attributes of a voice interface.
    1.3.6.1.4.1.9.9.315 ciscoPortSecurityMIB 3 89 The MIB module for managing Cisco Port Security.
    1.3.6.1.4.1.9.9.317 ciscoIscsiGwMIB 3 145 MIB module for monitoring and configuring iSCSI
    gateway functions. An iSCSI gateway represents FC
    (Fibre Channel) targets/initiat…
    1.3.6.1.4.1.9.9.318 ciscoXgcpMIB 3 120 This MIB is an enhancement for existing XGCP-MIB.

    xGCP is a set of protocols, for example SGCP (Simple
    Gateway Control Protocol) …
    1.3.6.1.4.1.9.9.319 ciscoPropAtmIfMIB 3 57 This MIB is designed for Propietary ATM (propAtm)
    interfaces.
    The propAtm interfaces are identified in the ifTable
    entries with if…
    1.3.6.1.4.1.9.9.321 ciscoMgcMIB 3 43 This MIB is used to support MGC(call agent) and
    MGC Group configuration.
    The MGC or MGC group configuration is performed
    under a s…
    1.3.6.1.4.1.9.9.322 ccacSysMIB 2 60 This MIB module provides provisioning and
    monitoring Call Admission Control (CAC).
    1.3.6.1.4.1.9.9.323 ciscoVoiceAalxProfileMIB 3 87 This MIB defines the objects specific to voice
    over ATM or voice over IP. Those objects are
    related to the following areas:
    1. COD…
    1.3.6.1.4.1.9.9.324 ciscoMediaGatewayMIB 3 107 The MIB module for managing Trunk Media Gateway.

    A Media Gateway is a network element that provides conversion
    between the audio …
    1.3.6.1.4.1.9.9.325 ciscoXgcpExtMIB 2 65 This MIB module is an extension to CISCO-XGCP-MIB.

    It defines the parameters related to the following
    aspects in xGCP protocols:
    *…
    1.3.6.1.4.1.9.9.326 ciscoIpLocalPoolMIB 3 57 This MIB defines the configuration and monitoring capabilities
    relating to local IP pools.

    Local IP pools have the following char…
    1.3.6.1.4.1.9.9.329 ciscoFcipMgmtExtMIB 3 75 A MIB module for extending the CISCO-FCIP-MGMT-MIB
    to add objects which provide additional information
    about FCIP interfaces not …
    1.3.6.1.4.1.9.9.330 ciscoSysInfoLogMIB 3 44 This MIB provides the configuration of System Information
    Logging feature, which allows a certain number of commands
    to be execut…
    1.3.6.1.4.1.9.9.331 ciscoCsgMIB 3 86 This MIB supports the Cisco Content Services Gateway
    (CSG) product. It includes five traps and four tables
    that enable querying C…
    1.3.6.1.4.1.9.9.333 ciscoGactMIB 3 40 The MIB for providing information specified
    in ITU Q752 Monitoring and Measurements for
    Signalling System No. 7(SS7) Network.
    This…
    1.3.6.1.4.1.9.9.334 ciscoGrtMIB 3 150 This MIB is for managing information required to
    route messages transported over Signalling System
    No. 7 (SS7) Network via Cisco …
    1.3.6.1.4.1.9.9.335 ciscoGsccpMIB 3 293 The MIB for signalling Connection Control Part(SCCP)
    messages transported over Signalling System
    No. 7 (SS7) Network via Cisco IP…
    1.3.6.1.4.1.9.9.336 ciscoGspMIB 3 273 The MIB for managing Signalling Points and its
    associated messages transported over Signalling
    System No. 7 (SS7) Network via Ci…
    1.3.6.1.4.1.9.9.339 ciscoSecureShellMIB 2 40 MIB module for displaying and configuring
    accounting and Secure Shell (SSH) related
    features in a device.

    SSH is a program to log …
    1.3.6.1.4.1.9.9.340 ciscoLreCpeMIB 3 21 The MIB module for the Cisco Long Reach Ethernet
    Customer Premise Equipment device information.

    *** ABBREVIATIONS, ACRONYMS, AND …
    1.3.6.1.4.1.9.9.341 ciscoCableQosMonitorMIB 3 57 This is the MIB module for subscriber QoS monitoring
    for DOCSIS-compliant Cable Modem Termination Systems
    (CMTS).

    Several subscrib…
    1.3.6.1.4.1.9.9.343 ciscoAuthorizationStatsMibModule 2 25 The Cisco User Authorization Statistics MIB models
    counters and objects that are of management
    interest.
    1.3.6.1.4.1.9.9.344 ciscoEntityDisplayMIB 2 21 This MIB module provides information about the
    status of display devices such as Light Emitting
    Diodes (LEDs) and alphanumeric di…
    1.3.6.1.4.1.9.9.350 ciscoEntityDiagMIB 3 139 This MIB module defines the managed objects that describe the
    online diagnostics capabilities supported by the
    physical entities …
    1.3.6.1.4.1.9.9.351 ciscoAtmTrunkMIB 3 102 The MIB for voice and Nx64 over ATM Trunking applications.

    The following lists the abbreviations used in this MIB:
    AAL ATM …
    1.3.6.1.4.1.9.9.356 ciscoVoiceToneCadenceMIB 3 30 The MIB defines the attributes of the programmable
    tones specified in ITU-T E.180 Supplement 2.

    Each country has its own regulati…
    1.3.6.1.4.1.9.9.358 ciscoBbsmMIB 3 20 This mib is designed to send BBSM specific
    notifications. There are variables that contain detail data
    that are bind to a notifi…
    1.3.6.1.4.1.9.9.359 ciscoLicenseMIB 3 52 This MIB module provides objects to view the features
    and services that are licensed to run on a system (usually
    a network entity…
    1.3.6.1.4.1.9.9.360 ciscoImageUpgradeMIB 3 101 This mib provides, objects to upgrade images on modules in the
    system, objects showing the status of the upgrade operation,
    and o…
    1.3.6.1.4.1.9.9.361 ciscoCommonRolesMIB 3 40 MIB module for managing the common roles between
    access methods like Command Line Interface (CLI), SNMP
    and XML interfaces.
    Every …
    1.3.6.1.4.1.9.9.362 ciscoPortStormControlMIB 3 41 The MIB module for managing Cisco Port Storm Control.
    1.3.6.1.4.1.9.9.363 ciscoFcSpanMIB 2 49 MIB module for displaying and configuring
    Switched Port Analyzer(SPAN) related features
    in a Fibre Channel device.

    SPAN is a featu…
    1.3.6.1.4.1.9.9.364 ciscoPsmMIB 3 213 The MIB module for the management of the
    Port Security Manager (PSM). The PSM
    consists of 2 aspects: Port binding and
    Fabric bindi…
    1.3.6.1.4.1.9.9.365 ciscoFCCMIB 3 42 The MIB module for the management of Fibre Channel
    Congestion Control(FCC). FCC is a Cisco proprietary
    flow control mechanism tha…
    1.3.6.1.4.1.9.9.367 ciscoAAAServerExtMIB 2 77 This MIB is an extension to the CISCO-AAA-SERVER-MIB.
    This MIB module enhances the 'casConfigTable' to
    include other types of Ser…
    1.3.6.1.4.1.9.9.368 368 0 0 Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later
    1.3.6.1.4.1.9.9.369 ciscoLicenseMgrMIB 3 74 The MIB module for a method of managing license files on
    the system.
    Licensing mechanism provides more flexibility in supporting
    v…
    1.3.6.1.4.1.9.9.370 ciscoSslProxyMIB 3 372 This MIB module is for managing a Secure Socket Layer
    (SSL) Proxy device which terminates and accelarates
    SSL and Transport Layer…
    1.3.6.1.4.1.9.9.371 ciscoIvrMIB 3 192 The MIB module for the management of Inter-VSAN
    routing within the framework of Cisco's
    Inter-VSAN Routing (IVR) Architecture. IV…
    1.3.6.1.4.1.9.9.372 ciscoIsnsClientMIB 3 16 MIB module for monitoring and configuring Internet
    Storage Name Service (iSNS) client.
    1.3.6.1.4.1.9.9.373 ciscoFdmiMIB 3 47 Fabric Device Management Interface (FDMI) MIB. This MIB
    module defines objects for managing the devices such as
    HBA (Host Bus Ada…
    1.3.6.1.4.1.9.9.374 ciscoDynamicArpInspectionMIB 3 82 The MIB module is for configuration of Dynamic ARP Inspection
    feature. Dynamic ARP Inspection is a security mechanism which
    valid…
    1.3.6.1.4.1.9.9.375 ciscoFiconMIB 3 176 This is the FICON (FIber CONnection) MIB module.

    FICON is an IBM standard of transport mechanism
    for communication between the ma…
    1.3.6.1.4.1.9.9.376 ciscoSVIAutostateMIB 3 19 The MIB module is for configuration of the switch virtual
    interface (SVI) autostate feature. Autostate feature
    is a mechanism to …
    1.3.6.1.4.1.9.9.377 ciscoFeatureCtrlMIB 3 53 There are two types of features in the system:

    - Regular features
    - Optional features

    The Regular features may or may not need to …
    1.3.6.1.4.1.9.9.378 ciscoSvcInterfaceMIB 3 115 MIB module for displaying and configuring
    SVC (SAN Volume Controller) related features
    in the Storage Area Network (SAN) switches…
    1.3.6.1.4.1.9.9.379 ciscoItpmMIB 3 47 The MIB for providing information related to
    monitoring SS7 links.

    This information can be used to manage the state
    of software u…
    1.3.6.1.4.1.9.9.380 ciscoDhcpSnoopingMIB 3 127 The MIB module is for configuration of DHCP Snooping
    feature. DHCP Snooping is a security mechanism which
    uses information gleane…
    1.3.6.1.4.1.9.9.381 ciscoDiffServExtMIB 2 49 This MIB is a Cisco extension to the
    DIFFSERV-MIB, RFC 3289. This MIB defines
    a Fibre Channel (FC) Multi Field filter to
    be used i…
    ...