This is the MIB module for subscriber QoS monitoring
for DOCSIS-compliant Cable Modem Termination Systems
(CMTS).
Several subscriber behavior can be monitored:
1. When the subscriber requests for more resources than
as defined by its QoS parameter set. In this case,
though requested for more rate-limiting happens in
the CMTS, hence, the subscriber will get only as much
resources as defined by its registered QoS parameter
set. In this mib, QoS parameter set refers to QoS
profiles for 1.0 modems and refer to service class
names for 1.1 and 2.0 modems.
2. When the subscriber continuously utilizes the resources
to the upper limit or very near to the upper limit as
defined by its QoS parameter set.
3. When the subscriber sometimes or never utilizes the
resources as defined by the upper limit of the QoS
parameter set.
In the first two cases, we need to monitor the subscribers
as upstream/downstream is a shared medium, and if all
subscribers start consuming resources as per their peak
rate, or a percentage of it, CMTS will be hard pressed for
resources. So, even though such subscribers are using
resources within the limits as defined by their QoS
parameter set, from the CMTS point of view, they are
over consuming.
Through out this MIB, we refer to this behavior of
subscribers as over consumption of resources and such
subscribers will be the violating subscribers.
The subscriber QoS Monitoring is a software feature
provided on the CMTS so that the CMTS may identify such
subscribers who over consume resources based on their QoS
parameter set, report them to a management entity, and
automatically mitigate the problem where possible.
This is done by penalizing the violating subscribers by
changing their QoS parameter set to enforced QoS
parameter set.
The MIB allows to create enforce rules which are used to
determine the over consumption of resources. The enforce
rule contains monitoring and enforced QoS parameter set.
The subscribers who over consume their bandwidth are
flagged and NMS notified of all such violations.
The MIB also provides a unified view of all over-consuming
subscribers.
Parsed from file CISCO-CABLE-QOS-MONITOR-MIB.mib
Module: CISCO-CABLE-QOS-MONITOR-MIB
This is the MIB module for subscriber QoS monitoring
for DOCSIS-compliant Cable Modem Termination Systems
(CMTS).
Several subscriber behavior can be monitored:
1. When the subscriber requests for more resources than
as defined by its QoS parameter set. In this case,
though requested for more rate-limiting happens in
the CMTS, hence, the subscriber will get only as much
resources as defined by its registered QoS parameter
set. In this mib, QoS parameter set refers to QoS
profiles for 1.0 modems and refer to service class
names for 1.1 and 2.0 modems.
2. When the subscriber continuously utilizes the resources
to the upper limit or very near to the upper limit as
defined by its QoS parameter set.
3. When the subscriber sometimes or never utilizes the
resources as defined by the upper limit of the QoS
parameter set.
In the first two cases, we need to monitor the subscribers
as upstream/downstream is a shared medium, and if all
subscribers start consuming resources as per their peak
rate, or a percentage of it, CMTS will be hard pressed for
resources. So, even though such subscribers are using
resources within the limits as defined by their QoS
parameter set, from the CMTS point of view, they are
over consuming.
Through out this MIB, we refer to this behavior of
subscribers as over consumption of resources and such
subscribers will be the violating subscribers.
The subscriber QoS Monitoring is a software feature
provided on the CMTS so that the CMTS may identify such
subscribers who over consume resources based on their QoS
parameter set, report them to a management entity, and
automatically mitigate the problem where possible.
This is done by penalizing the violating subscribers by
changing their QoS parameter set to enforced QoS
parameter set.
The MIB allows to create enforce rules which are used to
determine the over consumption of resources. The enforce
rule contains monitoring and enforced QoS parameter set.
The subscribers who over consume their bandwidth are
flagged and NMS notified of all such violations.
The MIB also provides a unified view of all over-consuming
subscribers.
Parsed from file CISCO-CABLE-QOS-MONITOR-MIB.my.txt
Company: None
Module: CISCO-CABLE-QOS-MONITOR-MIB
This is the MIB module for subscriber QoS monitoring
for DOCSIS-compliant Cable Modem Termination Systems
(CMTS).
Several subscriber behavior can be monitored:
1. When the subscriber requests for more resources than
as defined by its QoS parameter set. In this case,
though requested for more rate-limiting happens in
the CMTS, hence, the subscriber will get only as much
resources as defined by its registered QoS parameter
set. In this mib, QoS parameter set refers to QoS
profiles for 1.0 modems and refer to service class
names for 1.1 and 2.0 modems.
2. When the subscriber continuously utilizes the resources
to the upper limit or very near to the upper limit as
defined by its QoS parameter set.
3. When the subscriber sometimes or never utilizes the
resources as defined by the upper limit of the QoS
parameter set.
In the first two cases, we need to monitor the subscribers
as upstream/downstream is a shared medium, and if all
subscribers start consuming resources as per their peak
rate, or a percentage of it, CMTS will be hard pressed for
resources. So, even though such subscribers are using
resources within the limits as defined by their QoS
parameter set, from the CMTS point of view, they are
over consuming.
Through out this MIB, we refer to this behavior of
subscribers as over consumption of resources and such
subscribers will be the violating subscribers.
The subscriber QoS Monitoring is a software feature
provided on the CMTS so that the CMTS may identify such
subscribers who over consume resources based on their QoS
parameter set, report them to a management entity, and
automatically mitigate the problem where possible.
This is done by penalizing the violating subscribers by
changing their QoS parameter set to enforced QoS
parameter set.
The MIB allows to create enforce rules which are used to
determine the over consumption of resources. The enforce
rule contains monitoring and enforced QoS parameter set.
The subscribers who over consume their bandwidth are
flagged and NMS notified of all such violations.
The MIB also provides a unified view of all over-consuming
subscribers.
ciscoCableQosMonitorMIB MODULE-IDENTITY LAST-UPDATED "200402200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: Cisco Systems 170 West Tasman Drive San Jose, CA 95134 U.S.A. Phone: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB module for subscriber QoS monitoring for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Several subscriber behavior can be monitored: 1. When the subscriber requests for more resources than as defined by its QoS parameter set. In this case, though requested for more rate-limiting happens in the CMTS, hence, the subscriber will get only as much resources as defined by its registered QoS parameter set. In this mib, QoS parameter set refers to QoS profiles for 1.0 modems and refer to service class names for 1.1 and 2.0 modems. 2. When the subscriber continuously utilizes the resources to the upper limit or very near to the upper limit as defined by its QoS parameter set. 3. When the subscriber sometimes or never utilizes the resources as defined by the upper limit of the QoS parameter set. In the first two cases, we need to monitor the subscribers as upstream/downstream is a shared medium, and if all subscribers start consuming resources as per their peak rate, or a percentage of it, CMTS will be hard pressed for resources. So, even though such subscribers are using resources within the limits as defined by their QoS parameter set, from the CMTS point of view, they are over consuming. Through out this MIB, we refer to this behavior of subscribers as over consumption of resources and such subscribers will be the violating subscribers. The subscriber QoS Monitoring is a software feature provided on the CMTS so that the CMTS may identify such subscribers who over consume resources based on their QoS parameter set, report them to a management entity, and automatically mitigate the problem where possible. This is done by penalizing the violating subscribers by changing their QoS parameter set to enforced QoS parameter set. The MIB allows to create enforce rules which are used to determine the over consumption of resources. The enforce rule contains monitoring and enforced QoS parameter set. The subscribers who over consume their bandwidth are flagged and NMS notified of all such violations. The MIB also provides a unified view of all over-consuming subscribers." REVISION "200402200000Z" DESCRIPTION "Added objects in ccqmCmtsEnforceRuleTable to support DOCSIS1.1, DOCSIS2.0 modems and peak/off-peak monitoring. The objects are: ccqmCmtsEnfRuleAvgRate, ccqmCmtsEnfRuleDocsVer, ccqmCmtsEnfRuleRegSerClassName, ccqmCmtsEnfRuleEnfSerClassName, ccqmCmtsEnfRuleMonType, ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration, ccqmCmtsEnfRuleFirstAvgRate, ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration, ccqmCmtsEnfRuleSecondAvgRate, ccqmCmtsEnfRuleOffPeakDuration, ccqmCmtsEnfRuleOffPeakAvgRate Added ccqmCmtsIfBwUtilTable to provide thresholds for downstream/upstream bandwidth utilization. Removed ccqmCmtsEnfRuleByteCount which was obsoleted." REVISION "200304030000Z" DESCRIPTION "Changed ranges of few objects." REVISION "200303040000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 341 }
ciscoCableQosMonitorMIB OBJECT IDENTIFIER ::= { ciscoMgmt 341 }
Vendor: Cisco
Module: CISCO-CABLE-QOS-MONITOR-MIB
[Automatically extracted from oidview.com]
ciscoCableQosMonitorMIB MODULE-IDENTITY LAST-UPDATED "200402200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: Cisco Systems 170 West Tasman Drive San Jose, CA 95134 U.S.A. Phone: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB module for subscriber QoS monitoring for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Several subscriber behavior can be monitored: 1. When the subscriber requests for more resources than as defined by its QoS parameter set. In this case, though requested for more rate-limiting happens in the CMTS, hence, the subscriber will get only as much resources as defined by its registered QoS parameter set. In this mib, QoS parameter set refers to QoS profiles for 1.0 modems and refer to service class names for 1.1 and 2.0 modems. 2. When the subscriber continuously utilizes the resources to the upper limit or very near to the upper limit as defined by its QoS parameter set. 3. When the subscriber sometimes or never utilizes the resources as defined by the upper limit of the QoS parameter set. In the first two cases, we need to monitor the subscribers as upstream/downstream is a shared medium, and if all subscribers start consuming resources as per their peak rate, or a percentage of it, CMTS will be hard pressed for resources. So, even though such subscribers are using resources within the limits as defined by their QoS parameter set, from the CMTS point of view, they are over consuming. Through out this MIB, we refer to this behavior of subscribers as over consumption of resources and such subscribers will be the violating subscribers. The subscriber QoS Monitoring is a software feature provided on the CMTS so that the CMTS may identify such subscribers who over consume resources based on their QoS parameter set, report them to a management entity, and automatically mitigate the problem where possible. This is done by penalizing the violating subscribers by changing their QoS parameter set to enforced QoS parameter set. The MIB allows to create enforce rules which are used to determine the over consumption of resources. The enforce rule contains monitoring and enforced QoS parameter set. The subscribers who over consume their bandwidth are flagged and NMS notified of all such violations. The MIB also provides a unified view of all over-consuming subscribers." REVISION "200402200000Z" DESCRIPTION "Added objects in ccqmCmtsEnforceRuleTable to support DOCSIS1.1, DOCSIS2.0 modems and peak/off-peak monitoring. The objects are: ccqmCmtsEnfRuleAvgRate, ccqmCmtsEnfRuleDocsVer, ccqmCmtsEnfRuleRegSerClassName, ccqmCmtsEnfRuleEnfSerClassName, ccqmCmtsEnfRuleMonType, ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration, ccqmCmtsEnfRuleFirstAvgRate, ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration, ccqmCmtsEnfRuleSecondAvgRate, ccqmCmtsEnfRuleOffPeakDuration, ccqmCmtsEnfRuleOffPeakAvgRate Added ccqmCmtsIfBwUtilTable to provide thresholds for downstream/upstream bandwidth utilization. Removed ccqmCmtsEnfRuleByteCount which was obsoleted." REVISION "200304030000Z" DESCRIPTION "Changed ranges of few objects." REVISION "200303040000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 341 }
ciscoCableQosMonitorMIB MODULE-IDENTITY LAST-UPDATED "200402200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: Cisco Systems 170 West Tasman Drive San Jose, CA 95134 U.S.A. Phone: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is the MIB module for subscriber QoS monitoring for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Several subscriber behavior can be monitored: 1. When the subscriber requests for more resources than as defined by its QoS parameter set. In this case, though requested for more rate-limiting happens in the CMTS, hence, the subscriber will get only as much resources as defined by its registered QoS parameter set. In this mib, QoS parameter set refers to QoS profiles for 1.0 modems and refer to service class names for 1.1 and 2.0 modems. 2. When the subscriber continuously utilizes the resources to the upper limit or very near to the upper limit as defined by its QoS parameter set. 3. When the subscriber sometimes or never utilizes the resources as defined by the upper limit of the QoS parameter set. In the first two cases, we need to monitor the subscribers as upstream/downstream is a shared medium, and if all subscribers start consuming resources as per their peak rate, or a percentage of it, CMTS will be hard pressed for resources. So, even though such subscribers are using resources within the limits as defined by their QoS parameter set, from the CMTS point of view, they are over consuming. Through out this MIB, we refer to this behavior of subscribers as over consumption of resources and such subscribers will be the violating subscribers. The subscriber QoS Monitoring is a software feature provided on the CMTS so that the CMTS may identify such subscribers who over consume resources based on their QoS parameter set, report them to a management entity, and automatically mitigate the problem where possible. This is done by penalizing the violating subscribers by changing their QoS parameter set to enforced QoS parameter set. The MIB allows to create enforce rules which are used to determine the over consumption of resources. The enforce rule contains monitoring and enforced QoS parameter set. The subscribers who over consume their bandwidth are flagged and NMS notified of all such violations. The MIB also provides a unified view of all over-consuming subscribers." REVISION "200402200000Z" DESCRIPTION "Added objects in ccqmCmtsEnforceRuleTable to support DOCSIS1.1, DOCSIS2.0 modems and peak/off-peak monitoring. The objects are: ccqmCmtsEnfRuleAvgRate, ccqmCmtsEnfRuleDocsVer, ccqmCmtsEnfRuleRegSerClassName, ccqmCmtsEnfRuleEnfSerClassName, ccqmCmtsEnfRuleMonType, ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration, ccqmCmtsEnfRuleFirstAvgRate, ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration, ccqmCmtsEnfRuleSecondAvgRate, ccqmCmtsEnfRuleOffPeakDuration, ccqmCmtsEnfRuleOffPeakAvgRate Added ccqmCmtsIfBwUtilTable to provide thresholds for downstream/upstream bandwidth utilization. Removed ccqmCmtsEnfRuleByteCount which was obsoleted." REVISION "200304030000Z" DESCRIPTION "Changed ranges of few objects." REVISION "200303040000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 341 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.341.1 | ciscoCableQosMonitorMIBObjects | 3 | 43 | None |
| 1.3.6.1.4.1.9.9.341.2 | ccqmMIBNotificationsPrefix | 1 | 2 | None |
| 1.3.6.1.4.1.9.9.341.3 | ccqmMIBConformance | 2 | 9 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
| 1.3.6.1.4.1.9.9.297 | ciscoFcsMIB | 2 | 122 | The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB ena… |
| 1.3.6.1.4.1.9.9.299 | ciscoExtScsiMIB | 2 | 68 | The Cisco extension to CISCO-SCSI-MIB which is a copy of the Internet draft, the SCSI-MIB, from the IETF. Glossary of terms used i… |
| 1.3.6.1.4.1.9.9.300 | ciscoCallHomeMIB | 3 | 324 | The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deployin… |
| 1.3.6.1.4.1.9.9.301 | ciscoSyslogExtMIB | 2 | 44 | MIB module for configuring and monitoring System Log related management parameters as defined by RFC 3164. |
| 1.3.6.1.4.1.9.9.302 | ciscoDmMIB | 2 | 85 | The MIB module for the domain management functionality defined by the Fibre Channel standards (FC-SW2). For the purposes of this … |
| 1.3.6.1.4.1.9.9.305 | ciscoSystemExtMIB | 3 | 112 | MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on co… |
| 1.3.6.1.4.1.9.9.309 | ciscoIPIfMIB | 3 | 40 | The MIB module for configuring IP characteristics of the interfaces of a device. |
| 1.3.6.1.4.1.9.9.311 | ciscoEpmNotificationMIB | 3 | 48 | Notifications directly from hardware and software and processed notifications from various management applications can be furthe… |
| 1.3.6.1.4.1.9.9.312 | ciscoDataCollectionMIB | 3 | 84 | The MIB module allows a management application to select a set of MIB object instances whose values need to be collected on a per… |
| 1.3.6.1.4.1.9.9.313 | ciscoL2ControlMIB | 3 | 113 | The CISCO-L2-CONTROL-MIB is used to control some layer 2 functions, including MAC limit function and unicast flooding. This devi… |
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | 3 | 225 | The MIB module is an extension of CISCO-CAS-IF-MIB. It defines the attributes of a voice interface. |
| 1.3.6.1.4.1.9.9.315 | ciscoPortSecurityMIB | 3 | 89 | The MIB module for managing Cisco Port Security. |
| 1.3.6.1.4.1.9.9.317 | ciscoIscsiGwMIB | 3 | 145 | MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiat… |
| 1.3.6.1.4.1.9.9.318 | ciscoXgcpMIB | 3 | 120 | This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) … |
| 1.3.6.1.4.1.9.9.319 | ciscoPropAtmIfMIB | 3 | 57 | This MIB is designed for Propietary ATM (propAtm) interfaces. The propAtm interfaces are identified in the ifTable entries with if… |
| 1.3.6.1.4.1.9.9.321 | ciscoMgcMIB | 3 | 43 | This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a s… |
| 1.3.6.1.4.1.9.9.322 | ccacSysMIB | 2 | 60 | This MIB module provides provisioning and monitoring Call Admission Control (CAC). |
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | 3 | 87 | This MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. COD… |
| 1.3.6.1.4.1.9.9.324 | ciscoMediaGatewayMIB | 3 | 107 | The MIB module for managing Trunk Media Gateway. A Media Gateway is a network element that provides conversion between the audio … |
| 1.3.6.1.4.1.9.9.325 | ciscoXgcpExtMIB | 2 | 65 | This MIB module is an extension to CISCO-XGCP-MIB. It defines the parameters related to the following aspects in xGCP protocols: *… |
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | 3 | 57 | This MIB defines the configuration and monitoring capabilities relating to local IP pools. Local IP pools have the following char… |
| 1.3.6.1.4.1.9.9.329 | ciscoFcipMgmtExtMIB | 3 | 75 | A MIB module for extending the CISCO-FCIP-MGMT-MIB to add objects which provide additional information about FCIP interfaces not … |
| 1.3.6.1.4.1.9.9.330 | ciscoSysInfoLogMIB | 3 | 44 | This MIB provides the configuration of System Information Logging feature, which allows a certain number of commands to be execut… |
| 1.3.6.1.4.1.9.9.331 | ciscoCsgMIB | 3 | 86 | This MIB supports the Cisco Content Services Gateway (CSG) product. It includes five traps and four tables that enable querying C… |
| 1.3.6.1.4.1.9.9.332 | ciscoGsp2MIB | 3 | 91 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.333 | ciscoGactMIB | 3 | 40 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.334 | ciscoGrtMIB | 3 | 150 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.335 | ciscoGsccpMIB | 3 | 293 | The MIB for signalling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP… |
| 1.3.6.1.4.1.9.9.336 | ciscoGspMIB | 3 | 273 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.339 | ciscoSecureShellMIB | 2 | 40 | MIB module for displaying and configuring accounting and Secure Shell (SSH) related features in a device. SSH is a program to log … |
| 1.3.6.1.4.1.9.9.340 | ciscoLreCpeMIB | 3 | 21 | The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND … |
| 1.3.6.1.4.1.9.9.343 | ciscoAuthorizationStatsMibModule | 2 | 25 | The Cisco User Authorization Statistics MIB models counters and objects that are of management interest. |
| 1.3.6.1.4.1.9.9.344 | ciscoEntityDisplayMIB | 2 | 21 | This MIB module provides information about the status of display devices such as Light Emitting Diodes (LEDs) and alphanumeric di… |
| 1.3.6.1.4.1.9.9.350 | ciscoEntityDiagMIB | 3 | 139 | This MIB module defines the managed objects that describe the online diagnostics capabilities supported by the physical entities … |
| 1.3.6.1.4.1.9.9.351 | ciscoAtmTrunkMIB | 3 | 102 | The MIB for voice and Nx64 over ATM Trunking applications. The following lists the abbreviations used in this MIB: AAL ATM … |
| 1.3.6.1.4.1.9.9.356 | ciscoVoiceToneCadenceMIB | 3 | 30 | The MIB defines the attributes of the programmable tones specified in ITU-T E.180 Supplement 2. Each country has its own regulati… |
| 1.3.6.1.4.1.9.9.358 | ciscoBbsmMIB | 3 | 20 | This mib is designed to send BBSM specific notifications. There are variables that contain detail data that are bind to a notifi… |
| 1.3.6.1.4.1.9.9.359 | ciscoLicenseMIB | 3 | 52 | This MIB module provides objects to view the features and services that are licensed to run on a system (usually a network entity… |
| 1.3.6.1.4.1.9.9.360 | ciscoImageUpgradeMIB | 3 | 101 | This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and o… |
| 1.3.6.1.4.1.9.9.361 | ciscoCommonRolesMIB | 3 | 40 | MIB module for managing the common roles between access methods like Command Line Interface (CLI), SNMP and XML interfaces. Every … |
| 1.3.6.1.4.1.9.9.362 | ciscoPortStormControlMIB | 3 | 41 | The MIB module for managing Cisco Port Storm Control. |
| 1.3.6.1.4.1.9.9.363 | ciscoFcSpanMIB | 2 | 49 | MIB module for displaying and configuring Switched Port Analyzer(SPAN) related features in a Fibre Channel device. SPAN is a featu… |
| 1.3.6.1.4.1.9.9.364 | ciscoPsmMIB | 3 | 213 | The MIB module for the management of the Port Security Manager (PSM). The PSM consists of 2 aspects: Port binding and Fabric bindi… |
| 1.3.6.1.4.1.9.9.365 | ciscoFCCMIB | 3 | 42 | The MIB module for the management of Fibre Channel Congestion Control(FCC). FCC is a Cisco proprietary flow control mechanism tha… |
| 1.3.6.1.4.1.9.9.367 | ciscoAAAServerExtMIB | 2 | 77 | This MIB is an extension to the CISCO-AAA-SERVER-MIB. This MIB module enhances the 'casConfigTable' to include other types of Ser… |
| 1.3.6.1.4.1.9.9.368 | 368 | 0 | 0 | Cisco Content Services (CSS) switch product, also known as Arrowpoint, for version 7.40 and later |
| 1.3.6.1.4.1.9.9.369 | ciscoLicenseMgrMIB | 3 | 74 | The MIB module for a method of managing license files on the system. Licensing mechanism provides more flexibility in supporting v… |
| 1.3.6.1.4.1.9.9.370 | ciscoSslProxyMIB | 3 | 372 | This MIB module is for managing a Secure Socket Layer (SSL) Proxy device which terminates and accelarates SSL and Transport Layer… |
| 1.3.6.1.4.1.9.9.371 | ciscoIvrMIB | 3 | 192 | The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IV… |
| 1.3.6.1.4.1.9.9.372 | ciscoIsnsClientMIB | 3 | 16 | MIB module for monitoring and configuring Internet Storage Name Service (iSNS) client. |
| 1.3.6.1.4.1.9.9.373 | ciscoFdmiMIB | 3 | 47 | Fabric Device Management Interface (FDMI) MIB. This MIB module defines objects for managing the devices such as HBA (Host Bus Ada… |
| 1.3.6.1.4.1.9.9.374 | ciscoDynamicArpInspectionMIB | 3 | 82 | The MIB module is for configuration of Dynamic ARP Inspection feature. Dynamic ARP Inspection is a security mechanism which valid… |
| 1.3.6.1.4.1.9.9.375 | ciscoFiconMIB | 3 | 176 | This is the FICON (FIber CONnection) MIB module. FICON is an IBM standard of transport mechanism for communication between the ma… |
| 1.3.6.1.4.1.9.9.376 | ciscoSVIAutostateMIB | 3 | 19 | The MIB module is for configuration of the switch virtual interface (SVI) autostate feature. Autostate feature is a mechanism to … |
| 1.3.6.1.4.1.9.9.377 | ciscoFeatureCtrlMIB | 3 | 53 | There are two types of features in the system: - Regular features - Optional features The Regular features may or may not need to … |
| 1.3.6.1.4.1.9.9.378 | ciscoSvcInterfaceMIB | 3 | 115 | MIB module for displaying and configuring SVC (SAN Volume Controller) related features in the Storage Area Network (SAN) switches… |
| 1.3.6.1.4.1.9.9.379 | ciscoItpmMIB | 3 | 47 | The MIB for providing information related to monitoring SS7 links. This information can be used to manage the state of software u… |
| 1.3.6.1.4.1.9.9.380 | ciscoDhcpSnoopingMIB | 3 | 127 | The MIB module is for configuration of DHCP Snooping feature. DHCP Snooping is a security mechanism which uses information gleane… |
| 1.3.6.1.4.1.9.9.381 | ciscoDiffServExtMIB | 2 | 49 | This MIB is a Cisco extension to the DIFFSERV-MIB, RFC 3289. This MIB defines a Fibre Channel (FC) Multi Field filter to be used i… |
| 1.3.6.1.4.1.9.9.383 | ciscoCidsMIB | 3 | 183 | Cisco Intrusion Detection System MIB. Provides trap definitions for the evAlert and evError elements of the IDIOM (Intrusion Det… |
| 1.3.6.1.4.1.9.9.384 | ciscoDot11AntennaMIB | 2 | 11 | This MIB is intended to be implemented on 802.11 Access Points and Wireless Bridges to provide information about the antennas con… |
| 1.3.6.1.4.1.9.9.385 | ciscoUnityMIB | 3 | 101 | The MIB Module for the management of Cisco Unity server. Cisco Unity is a Unified Communications solution that provides advanced,… |
| 1.3.6.1.4.1.9.9.386 | ciscoModuleAutoShutdownMIB | 3 | 36 | The CISCO-MODULE-AUTO-SHUTDOWN-MIB is used to configure the module automatic shutdown feature. Modules will be reset by the syste… |
| 1.3.6.1.4.1.9.9.387 | ciscoNetflowMIB | 3 | 206 | The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics.… |
| 1.3.6.1.4.1.9.9.388 | ciscoVirtualSwitchMIB | 3 | 128 | This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines sev… |
| 1.3.6.1.4.1.9.9.389 | ciscoVoiceCasModuleMIB | 3 | 22 | This MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enab… |
| 1.3.6.1.4.1.9.9.390 | ciscoCableDiagMIB | 3 | 33 | This MIB module defines objects for managing cable diagnostic test capabilites supported by the Cisco devices. Cable diagnostic t… |
| 1.3.6.1.4.1.9.9.391 | ciscoFcspMIB | 3 | 46 | MIB module for managing Fibre Channel Security for the fibre channel devices. This MIB is used to configure and monitor the Fibre-… |
| ... | ||||