Configuration management MIB.
The MIB represents a model of configuration data that
exists in various locations:
running in use by the running system
terminal saved to whatever is attached as the terminal
local saved locally in NVRAM or flash
remote saved to some server on the network
Although some of the system functions that relate here
can be used for general file storage and transfer, this
MIB intends to include only such operations as clearly
relate to configuration. Its primary emphasis is to
track changes and saves of the running configuration.
As saved data moves further from startup use, such as
into different local flash files or onto the network,
tracking becomes difficult to impossible, so the MIB's
interest and functions are confined in that area.
Information from ccmCLIHistoryCommandTable can be used
to track the exact configuration changes that took
place within a particular Configuration History
event. NMS' can use this information to update
the related components.
For example:
If commands related only to MPLS are entered
then the NMS need to update only the MPLS related
management information rather than updating
all of its management information.
Acronyms and terms:
CLI Command Line Interface.
Parsed from file CISCO-CONFIG-MAN-MIB.mib
Module: CISCO-CONFIG-MAN-MIB
ciscoConfigManMIB MODULE-IDENTITY
LAST-UPDATED "9511280000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: [email protected]"
DESCRIPTION
"Configuration management MIB.
The MIB represents a model of configuration data that
exists in various locations:
running in use by the running system
terminal operators mind or attached hardware
local saved locally in NVRAM or flash
remote saved to some server on the network
Although some of the system functions that relate here
can be used for general file storage and transfer, this
MIB intends to include only such operations as clearly
relate to configuration. Its primary emphasis is to
track changes and saves of the running configuration.
As saved data moves further from startup use, such as
into different local flash files or onto the network,
tracking becomes difficult to impossible, so the MIBs
interest and functions are confined in that area."
REVISION "9511280000Z"
DESCRIPTION
"Initial version of this MIB module."
View at oid-info.com
Configuration management MIB.
The MIB represents a model of configuration data that
exists in various locations:
running in use by the running system
terminal operator's mind or attached hardware
local saved locally in NVRAM or flash
remote saved to some server on the network
Although some of the system functions that relate here
can be used for general file storage and transfer, this
MIB intends to include only such operations as clearly
relate to configuration. Its primary emphasis is to
track changes and saves of the running configuration.
As saved data moves further from startup use, such as
into different local flash files or onto the network,
tracking becomes difficult to impossible, so the MIB's
interest and functions are confined in that area.
Parsed from file cisco-config-man.mib.txt
Company: None
Module: CISCO-CONFIG-MAN-MIB
Configuration management MIB.
The MIB represents a model of configuration data that
exists in various locations:
running in use by the running system
terminal saved to whatever is attached as the terminal
local saved locally in NVRAM or flash
remote saved to some server on the network
Although some of the system functions that relate here
can be used for general file storage and transfer, this
MIB intends to include only such operations as clearly
relate to configuration. Its primary emphasis is to
track changes and saves of the running configuration.
As saved data moves further from startup use, such as
into different local flash files or onto the network,
tracking becomes difficult to impossible, so the MIB's
interest and functions are confined in that area.
Information from ccmCLIHistoryCommandTable can be used
to track the exact configuration changes that took
place within a particular Configuration History
event. NMS' can use this information to update
the related components.
For example:
If commands related only to MPLS are entered
then the NMS need to update only the MPLS related
management information rather than updating
all of its management information.
Acronyms and terms:
CLI Command Line Interface.
ciscoConfigManMIB MODULE-IDENTITY LAST-UPDATED "200704270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Configuration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use by the running system terminal saved to whatever is attached as the terminal local saved locally in NVRAM or flash remote saved to some server on the network Although some of the system functions that relate here can be used for general file storage and transfer, this MIB intends to include only such operations as clearly relate to configuration. Its primary emphasis is to track changes and saves of the running configuration. As saved data moves further from startup use, such as into different local flash files or onto the network, tracking becomes difficult to impossible, so the MIB's interest and functions are confined in that area. Information from ccmCLIHistoryCommandTable can be used to track the exact configuration changes that took place within a particular Configuration History event. NMS' can use this information to update the related components. For example: If commands related only to MPLS are entered then the NMS need to update only the MPLS related management information rather than updating all of its management information. Acronyms and terms: CLI Command Line Interface." REVISION "200704270000Z" DESCRIPTION "Changes to definition of terminal as an output location." REVISION "200608170000Z" DESCRIPTION "Added a new group of objects to store the information related to the Config Change Tracking ID (CTID) feature. CTID will provide a version number that is unique for version-incrementing changes to the IOS running-configuration. It will also provide information about when CTID last changed. Added scalars: * ccmCTID * ccmCTIDLastChangeTime * ccmCTIDWhoChanged * ccmCTIDRolledOverNotifEnable Added Notification: * ccmCTIDRolledOver Added Object Group: * ciscoConfigManCTIDObjectGroup Added Notification Group: * ciscoConfigManCTIDNotifyGroup Added Compliance: ciscoConfigManMIBComplianceRev4" REVISION "200406180000Z" DESCRIPTION "The Objects ccmHistoryEventCommandSourceAddress and ccmHistoryEventServerAddress are deprecated since they support only IPv4 address. These objects have been replaced by two new objects ccmHistoryEventCommandSourceAddrRev1 and ccmHistoryEventServerAddrRev1. In addition to these objects two more new objects are defined ccmHistoryEventCommandSourceAddrType and ccmHistoryEventServerAddrType" REVISION "200206070000Z" DESCRIPTION "Added new enumerations networkFtp(8) and networkScp(9) to HistoryEventMedium." REVISION "200203120000Z" DESCRIPTION "Added ccmCLIHistoryCommandTable for storing the CLI commands that took effect during a configuration event. Added scalars ccmCLIHistoryMaxCmdEntries ccmCLIHistoryCmdEntries and ccmCLIHistoryCmdEntriesAllowed. Added ccmHistoryCLICmdEntriesBumped to ccmHistoryEventTable to store the number of corresponding bumped entries in the ccmCLIHistoryCommandTable. Added the ccmCLIRunningConfigChanged notification. Added ccmCLICfgRunConfNotifEnable to control the ccmCLIRunningConfigChanged notification. Added notification group ciscoConfigManHistNotifyGroup. Updated the MIB description to indicate the use of the above additions." REVISION "9511280000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 43 }
ciscoConfigManMIB OBJECT IDENTIFIER ::= { ciscoMgmt 43 }
Automatically extracted from Cisco "SNMP v2 MIBs".
ciscoConfigManMIB MODULE-IDENTITY LAST-UPDATED "9511280000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Configuration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use by the running system terminal operator's mind or attached hardware local saved locally in NVRAM or flash remote saved to some server on the network Although some of the system functions that relate here can be used for general file storage and transfer, this MIB intends to include only such operations as clearly relate to configuration. Its primary emphasis is to track changes and saves of the running configuration. As saved data moves further from startup use, such as into different local flash files or onto the network, tracking becomes difficult to impossible, so the MIB's interest and functions are confined in that area." REVISION "9511280000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 43 }
ciscoConfigManMIB MODULE-IDENTITY LAST-UPDATED "200704270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Configuration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use by the running system terminal saved to whatever is attached as the terminal local saved locally in NVRAM or flash remote saved to some server on the network Although some of the system functions that relate here can be used for general file storage and transfer, this MIB intends to include only such operations as clearly relate to configuration. Its primary emphasis is to track changes and saves of the running configuration. As saved data moves further from startup use, such as into different local flash files or onto the network, tracking becomes difficult to impossible, so the MIB's interest and functions are confined in that area. Information from ccmCLIHistoryCommandTable can be used to track the exact configuration changes that took place within a particular Configuration History event. NMS' can use this information to update the related components. For example: If commands related only to MPLS are entered then the NMS need to update only the MPLS related management information rather than updating all of its management information. Acronyms and terms: CLI Command Line Interface." REVISION "200704270000Z" DESCRIPTION "Changes to definition of terminal as an output location." REVISION "200608170000Z" DESCRIPTION "Added a new group of objects to store the information related to the Config Change Tracking ID (CTID) feature. CTID will provide a version number that is unique for version-incrementing changes to the IOS running-configuration. It will also provide information about when CTID last changed. Added scalars: * ccmCTID * ccmCTIDLastChangeTime * ccmCTIDWhoChanged * ccmCTIDRolledOverNotifEnable Added Notification: * ccmCTIDRolledOver Added Object Group: * ciscoConfigManCTIDObjectGroup Added Notification Group: * ciscoConfigManCTIDNotifyGroup Added Compliance: ciscoConfigManMIBComplianceRev4" REVISION "200406180000Z" DESCRIPTION "The Objects ccmHistoryEventCommandSourceAddress and ccmHistoryEventServerAddress are deprecated since they support only IPv4 address. These objects have been replaced by two new objects ccmHistoryEventCommandSourceAddrRev1 and ccmHistoryEventServerAddrRev1. In addition to these objects two more new objects are defined ccmHistoryEventCommandSourceAddrType and ccmHistoryEventServerAddrType" REVISION "200206070000Z" DESCRIPTION "Added new enumerations networkFtp(8) and networkScp(9) to HistoryEventMedium." REVISION "200203120000Z" DESCRIPTION "Added ccmCLIHistoryCommandTable for storing the CLI commands that took effect during a configuration event. Added scalars ccmCLIHistoryMaxCmdEntries ccmCLIHistoryCmdEntries and ccmCLIHistoryCmdEntriesAllowed. Added ccmHistoryCLICmdEntriesBumped to ccmHistoryEventTable to store the number of corresponding bumped entries in the ccmCLIHistoryCommandTable. Added the ccmCLIRunningConfigChanged notification. Added ccmCLICfgRunConfNotifEnable to control the ccmCLIRunningConfigChanged notification. Added notification group ciscoConfigManHistNotifyGroup. Updated the MIB description to indicate the use of the above additions." REVISION "9511280000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 43 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.43.1 | ciscoConfigManMIBObjects | 4 | 55 | None |
| 1.3.6.1.4.1.9.9.43.2 | ciscoConfigManMIBNotificationPrefix | 1 | 4 | None |
| 1.3.6.1.4.1.9.9.43.3 | ciscoConfigManMIBConformance | 2 | 13 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.6 | ciscoTcpMIB | 3 | 20 | An extension to the IETF MIB module for managing TCP implementations |
| 1.3.6.1.4.1.9.9.10 | ciscoFlashMIB | 2 | 164 | This MIB provides for the management of Cisco Flash Devices. |
| 1.3.6.1.4.1.9.9.13 | ciscoEnvMonMIB | 4 | 68 | The MIB module to describe the status of the Environmental Monitor on those devices which support one. |
| 1.3.6.1.4.1.9.9.16 | ciscoPingMIB | 3 | 31 | Modified description of ciscoPingAddress object. |
| 1.3.6.1.4.1.9.9.17 | ciscoVinesMIB | 2 | 188 | " REVISION "9506070000Z |
| 1.3.6.1.4.1.9.9.18 | ciscoIsdnuIfMIB | 3 | 29 | ISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router. |
| 1.3.6.1.4.1.9.9.19 | ciscoSnapshotMIB | 2 | 28 | Snapshot routing MIB |
| 1.3.6.1.4.1.9.9.20 | channel | 2 | 169 | This is the MIB module for objects used to manage the Cisco Mainframe Channel Connection (CMCC) cards. |
| 1.3.6.1.4.1.9.9.22 | ciscoRptrMIB | 3 | 32 | " REVISION "9512050000Z |
| 1.3.6.1.4.1.9.9.23 | ciscoCdpMIB | 2 | 78 | The MIB module for management of the Cisco Discovery Protocol in Cisco devices. |
| 1.3.6.1.4.1.9.9.24 | ciscoDspuMIB | 2 | 150 | Used to define and manage DSPU objects. |
| 1.3.6.1.4.1.9.9.25 | ciscoImageMIB | 2 | 10 | Router image MIB which identify the capabilities and characteristics of the image |
| 1.3.6.1.4.1.9.9.26 | ciscoIsdnMib | 3 | 34 | The MIB module to describe the status of the ISDN Interfaces on the routers. |
| 1.3.6.1.4.1.9.9.27 | ciscoCallHistoryMib | 2 | 40 | The MIB module to describe and store the call information of the routers for accounting purposes. |
| 1.3.6.1.4.1.9.9.28 | ciscoSnaSdllcMIB | 3 | 28 | ciscoSnaSdllcMIB MODULE-IDENTITY LAST-UPDATED "9812170000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cus… |
| 1.3.6.1.4.1.9.9.29 | ciscoRsrbMIB | 3 | 45 | This is the MIB module for objects used to manage RSRB. Overview of remote source-route bridging (RSRB) management and MIB MIB … |
| 1.3.6.1.4.1.9.9.30 | ciscoStunMIB | 3 | 41 | The MIB module for serial Tunneling. Overview of STUN MIB MIB description The STUN MIB provides the configuration and operationa… |
| 1.3.6.1.4.1.9.9.31 | ciscoTcpOffloadMIB | 2 | 20 | This is the MIB module for objects used to manage the cisco tcp offload feature. The IBM mainframe (host) supports TCP/IP. As a … |
| 1.3.6.1.4.1.9.9.32 | ciscoCipTcpIpMIB | 2 | 88 | This is the MIB module for objects used to manage the cisco TCP/IP stack running on the Cisco Mainframe Channel Connection (CMCC)… |
| 1.3.6.1.4.1.9.9.33 | ciscoCipCsnaMIB | 3 | 66 | None |
| 1.3.6.1.4.1.9.9.34 | ciscoCipLanMIB | 2 | 24 | This is the Management Information Base (MIB) module for objects used to manage the cisco internal LAN support in Cisco Mainframe… |
| 1.3.6.1.4.1.9.9.35 | ciscoBstunMIB | 3 | 71 | The MIB module for Block Serial Tunneling. Overview of BSTUN MIB MIB description The BSTUN MIB provides the configuration and o… |
| 1.3.6.1.4.1.9.9.36 | ciscoBscMIB | 2 | 46 | The MIB module for BSC. Overview of BSC MIB MIB description The BSC MIB provides the configuration and operational information on… |
| 1.3.6.1.4.1.9.9.37 | ciscoQueueMIB | 3 | 23 | This is the MIB module for objects used to manage interface queuing in Cisco devices. |
| 1.3.6.1.4.1.9.9.38 | ciscoLecsMIB | 2 | 77 | The MIB module for the management of LANE Configuration in Cisco devices. |
| 1.3.6.1.4.1.9.9.39 | ciscoLesMIB | 2 | 82 | The MIB module for the management of LANE Service in Cisco devices. |
| 1.3.6.1.4.1.9.9.40 | ciscoBusMIB | 2 | 37 | The MIB module for the management of LANE broadcast and unknown servers. |
| 1.3.6.1.4.1.9.9.41 | ciscoSyslogMIB | 3 | 49 | The MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs. |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | 3 | 816 | This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols. The table struc… |
| 1.3.6.1.4.1.9.9.44 | ciscoICsuDsuMIB | 4 | 70 | Integrated CSU/DSU MIB module. For T1 and Switched 56 kbps interfaces. |
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | 2 | 39 | A minimal set of managed objects for tracking the status of DS3/E3/DS1/E1 and SONET interfaces. |
| 1.3.6.1.4.1.9.9.46 | ciscoVtpMIB | 3 | 261 | The MIB module for entities implementing the VTP protocol and Vlan management. |
| 1.3.6.1.4.1.9.9.47 | ciscoModemMgmtMIB | 3 | 112 | This MIB module provides modem call related data for tracking the progress and status of a call. |
| 1.3.6.1.4.1.9.9.48 | ciscoMemoryPoolMIB | 3 | 32 | MIB module for monitoring memory pools |
| 1.3.6.1.4.1.9.9.49 | ciscoFrameRelayMIB | 2 | 158 | Cisco Frame Relay MIB |
| 1.3.6.1.4.1.9.9.50 | ciscoAtmServiceRegistryMIB | 2 | 14 | A MIB module to allow an NMS to monitor and configure the information which an ATM switch makes available via the ILMI's Service … |
| 1.3.6.1.4.1.9.9.51 | ciscoAtmSwAddrMIB | 2 | 11 | ATM Switch address MIB |
| 1.3.6.1.4.1.9.9.52 | ciscoIpEncryptionMIB | 3 | 51 | Used to manage the encryption feature. |
| 1.3.6.1.4.1.9.9.53 | ciscoVmpsMIB | 3 | 55 | The MIB module for the management of the VLAN Membership Policy Server. |
| 1.3.6.1.4.1.9.9.54 | ciscoTn3270ServerMIB | 3 | 105 | The MIB module for TN3270 Server. MIB description The PU and LU MIB are defined in RFC 1666. This MIB provides additional informa… |
| 1.3.6.1.4.1.9.9.55 | ciscoAsppMIB | 2 | 29 | The ASPP MIB provides the configuration and operational information on asynchronous polled protocols such as the asynchronous sec… |
| 1.3.6.1.4.1.9.9.56 | ciscoVlanBridgingMIB | 2 | 13 | A set of managed objects for optimizing access to bridging related data from RFC 1493. This MIB is modeled after portions of RFC… |
| 1.3.6.1.4.1.9.9.57 | ciscoCompressionServiceAdapterMIB | 2 | 19 | Used to manage the compression service adapter. |
| 1.3.6.1.4.1.9.9.59 | ciscoStackMakerMIB | 2 | 15 | The MIB module for Cisco Systems' StackMaker. |
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | 3 | 26 | Initial version of this MIB module. Phy definition Throughout this document phy is used as an abbreviation for Physical Interface.… |
| 1.3.6.1.4.1.9.9.61 | ciscoAccessEnvMonMIB | 3 | 13 | The MIB module to describe the additional status of the Environmental Monitor on those Cisco Access devices which support one. |
| 1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | 2 | 90 | Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router. |
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | 3 | 377 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing management of voice telephony peers on both a circuit-s… |
| 1.3.6.1.4.1.9.9.64 | ciscoVoiceInterfaceMIB | 2 | 24 | Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN inte… |
| 1.3.6.1.4.1.9.9.65 | ciscoPnniMIB | 2 | 49 | The MIB module for managing Cisco specific extensions to the ATM Forum PNNI MIB. |
| 1.3.6.1.4.1.9.9.66 | ciscoAal5MIB | 2 | 25 | Cisco Enterprise AAL5 MIB file that provide AAL5 specific information that are either excluded by RFC 1695 or specific to Cisco p… |
| 1.3.6.1.4.1.9.9.67 | ciscoAtmAccessListMIB | 2 | 39 | A cisco ATM access list mib module. |
| 1.3.6.1.4.1.9.9.68 | ciscoVlanMembershipMIB | 3 | 90 | The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McClog… |
| 1.3.6.1.4.1.9.9.69 | ciscoLecDataVccMIB | 3 | 13 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. This extension identifies those VCCs which are being us… |
| 1.3.6.1.4.1.9.9.72 | ciscoCipCmpcMIB | 3 | 46 | This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cis… |
| 1.3.6.1.4.1.9.9.73 | ciscoCipTgMIB | 2 | 98 | This is the Management Information Base (MIB) module for objects used to manage Transmission Groups (TGs) in Cisco Mainframe Chan… |
| 1.3.6.1.4.1.9.9.74 | ciscoDlswExtMIB | 3 | 134 | The MIB module for management of Cisco specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795 and RFC… |
| 1.3.6.1.4.1.9.9.76 | ciscoDlcSwitchMIB | 2 | 55 | This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or end… |
| 1.3.6.1.4.1.9.9.77 | ciscoLecExtMIB | 3 | 12 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. |
| 1.3.6.1.4.1.9.9.78 | ciscoAtmSigDiagMIB | 2 | 58 | The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains infor… |
| 1.3.6.1.4.1.9.9.80 | ciscoFtpClientMIB | 2 | 29 | The MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes. |
| 1.3.6.1.4.1.9.9.81 | ciscoBulkFileMIB | 3 | 63 | The MIB module for creating and deleting bulk files of SNMP data for file transfer. |
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | 3 | 300 | The MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP). |
| 1.3.6.1.4.1.9.9.83 | ciscoWredMIB | 2 | 26 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop is a method which avoids traffic congestion on an output int… |
| 1.3.6.1.4.1.9.9.84 | ciscoIpStatMIB | 2 | 34 | Cisco IP Statistics MIB - Overview This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in… |
| 1.3.6.1.4.1.9.9.85 | ciscoCasIfMIB | 2 | 119 | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel … |
| 1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | 4 | 141 | ciscoDspMgmtMIB MODULE-IDENTITY LAST-UPDATED "200008140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cu… |
| 1.3.6.1.4.1.9.9.87 | ciscoC2900MIB | 3 | 133 | The MIB module for Catalyst 2900 enterprise specific information |
| 1.3.6.1.4.1.9.9.88 | ciscoAtmExtMIB | 3 | 50 | ciscoAtmExtMIB MODULE-IDENTITY LAST-UPDATED "9706200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custo… |
| 1.3.6.1.4.1.9.9.89 | csCugMIB | 2 | 24 | This MIB module is for closed user group support (virtual private networks). |
| 1.3.6.1.4.1.9.9.91 | entitySensorMIB, ciscoEntitySensorMIB | 3 | 42 | The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable. |
| 1.3.6.1.4.1.9.9.92 | ciscoEntityAssetMIB | 3 | 29 | Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. |
| ... | ||||