Reference record for OID 1.3.6.1.4.1.9.9.60

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

60

node name

ciscoAtmDualPhyMIB

dot oid

1.3.6.1.4.1.9.9.60

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAtmDualPhyMIB(60)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAtmDualPhyMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/60

Description by oid_info

ciscoAtmDualPhyMIB MODULE-IDENTITY
LAST-UPDATED "9608300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
E-mail: [email protected]"
DESCRIPTION
"Initial version of this MIB module.
Phy definition
Throughout this document phy is used as an abbreviation
for Physical Interface. In particular it refers to a
physical ATM jack on a Catalyst 5000 ATM card. This card
can be fitted with either one or two physical jacks, only
one of which may be active at any given moment. The second
phy serves as a redundant connector to the ATM backbone.
Note, however, that for logistical reasons, each phy has
a separate ifIndex.
Support of the phy by iftable
The dual phy entity on the c5K ATM line card is managed
using the iftable. Specific interpretations of iftable
for the dual phy entity are as follows.
Object Use for dual phy entity
====== =======================
ifIndex Each phy entity is represented by an ifEntry.
ifDescr Description of the phy entity.
iftype The value for the phy entity is other(1).
ifSpeed See [1].
ifPhysAddress An octet string of zero length, per [1].
ifAdminStatus See [1].
ifOperStatus See [1]. In addition, note that a phy can
be in the up state but still not be the
active phy. However, the active phy will
always be up.
ifLastChange See [1].
ifName See [1].
ifLinkUpDownTrapEnable disabled(2).
ifHighSpeed See [1].
ifConnectorPresent true(1).
References
[1] McCloghrie, K. and F. Kastenholz, Evolution of the
Interfaces Group of MIB-II, RFC 1573, Hughes LAN Systems,
FTP Software, January 1994."
View at oid-info.com

Description by mibdepot

Initial version of this MIB module.


Phy definition

Throughout this document phy is used as an abbreviation
for Physical Interface. In particular it refers to a
physical ATM jack on a Catalyst 5000 ATM card. This card
can be fitted with either one or two physical jacks, only
one of which may be active at any given moment. The second
phy serves as a redundant connector to the ATM backbone.
Note, however, that for logistical reasons, each phy has
a separate ifIndex.


Support of the phy by ifTable

The dual phy entity on the c5K ATM line card is managed
using the ifTable. Specific interpretations of ifTable
for the dual phy entity are as follows.

Object Use for dual phy entity
====== =======================

ifIndex Each phy entity is represented by an ifEntry.

ifDescr Description of the phy entity.

ifType The value for the phy entity is other(1).

ifSpeed See [1].

ifPhysAddress An octet string of zero length, per [1].

ifAdminStatus See [1].

ifOperStatus See [1]. In addition, note that a phy can
be in the up state but still not be the
active phy. However, the active phy will
always be up.

ifLastChange See [1].

ifName See [1].

ifLinkUpDownTrapEnable disabled(2).

ifHighSpeed See [1].

ifConnectorPresent true(1).


References

[1] McCloghrie, K. and F. Kastenholz, Evolution of the
Interfaces Group of MIB-II, RFC 1573, Hughes LAN Systems,
FTP Software, January 1994.

Parsed from file CISCO-ATM-DUAL-PHY-MIB.my.txt
Company: None
Module: CISCO-ATM-DUAL-PHY-MIB

Description by cisco

Initial version of this MIB module.


Phy definition

Throughout this document phy is used as an abbreviation
for Physical Interface. In particular it refers to a
physical ATM jack on a Catalyst 5000 ATM card. This card
can be fitted with either one or two physical jacks, only
one of which may be active at any given moment. The second
phy serves as a redundant connector to the ATM backbone.
Note, however, that for logistical reasons, each phy has
a separate ifIndex.


Support of the phy by ifTable

The dual phy entity on the c5K ATM line card is managed
using the ifTable. Specific interpretations of ifTable
for the dual phy entity are as follows.

Object Use for dual phy entity
====== =======================

ifIndex Each phy entity is represented by an ifEntry.

ifDescr Description of the phy entity.

ifType The value for the phy entity is other(1).

ifSpeed See [1].

ifPhysAddress An octet string of zero length, per [1].

ifAdminStatus See [1].

ifOperStatus See [1]. In addition, note that a phy can
be in the up state but still not be the
active phy. However, the active phy will
always be up.

ifLastChange See [1].

ifName See [1].

ifLinkUpDownTrapEnable disabled(2).

ifHighSpeed See [1].

ifConnectorPresent true(1).


References

[1] McCloghrie, K. and F. Kastenholz, Evolution of the
Interfaces Group of MIB-II, RFC 1573, Hughes LAN Systems,
FTP Software, January 1994.

Information by circitor

ciscoAtmDualPhyMIB OBJECT IDENTIFIER ::= { ciscoMgmt 60 }

Information by cisco_v1

ciscoAtmDualPhyMIB OBJECT IDENTIFIER ::= { ciscoMgmt 60 }

Information by oid_info

Automatically extracted from Cisco "SNMP v2 MIBs".

Information by mibdepot

ciscoAtmDualPhyMIB MODULE-IDENTITY
	LAST-UPDATED	"9608300000Z"
	ORGANIZATION	"Cisco Systems, Inc."
	CONTACT-INFO
		"	Cisco Systems
			Customer Service

		Postal:	170 W. Tasman Drive
			San Jose, CA  95134-1706
			USA

		   Tel: +1 800 553-NETS

		E-mail: [email protected]"
	DESCRIPTION
		"Initial version of this MIB module.


		Phy definition

		Throughout this document phy is used as an abbreviation
		for Physical Interface.  In particular it refers to a
		physical ATM jack on a Catalyst 5000 ATM card.  This card
		can be fitted with either one or two physical jacks, only
		one of which may be active at any given moment.  The second
		phy serves as a redundant connector to the ATM backbone.
		Note, however, that for logistical reasons, each phy has
		a separate ifIndex.


		Support of the phy by ifTable

		The dual phy entity on the c5K ATM line card is managed
		using the ifTable.  Specific interpretations of ifTable
		for the dual phy entity are as follows.

		Object   Use for dual phy entity
		======   =======================

		ifIndex  Each phy entity is represented by an ifEntry.

		ifDescr  Description of the phy entity.

		ifType   The value for the phy entity is other(1).

		ifSpeed  See [1].

		ifPhysAddress   An octet string of zero length, per [1].

		ifAdminStatus   See [1].

		ifOperStatus    See [1].  In addition, note that a phy can
                          be in the up state but still not be the
                          active phy.  However, the active phy will
                          always be up.

		ifLastChange    See [1].

		ifName   See [1].

		ifLinkUpDownTrapEnable     disabled(2).

		ifHighSpeed      See [1]. 

		ifConnectorPresent	true(1).


		References

		[1] McCloghrie, K. and F. Kastenholz, Evolution of the
		Interfaces Group of MIB-II, RFC 1573, Hughes LAN Systems,
		FTP Software, January 1994."
	::= { ciscoMgmt 60 }

Information by cisco

ciscoAtmDualPhyMIB MODULE-IDENTITY
	LAST-UPDATED	"9608300000Z"
	ORGANIZATION	"Cisco Systems, Inc."
	CONTACT-INFO
		"	Cisco Systems
			Customer Service

		Postal:	170 W. Tasman Drive
			San Jose, CA  95134-1706
			USA

		   Tel: +1 800 553-NETS

		E-mail: [email protected]"
	DESCRIPTION
		"Initial version of this MIB module.


		Phy definition

		Throughout this document phy is used as an abbreviation
		for Physical Interface.  In particular it refers to a
		physical ATM jack on a Catalyst 5000 ATM card.  This card
		can be fitted with either one or two physical jacks, only
		one of which may be active at any given moment.  The second
		phy serves as a redundant connector to the ATM backbone.
		Note, however, that for logistical reasons, each phy has
		a separate ifIndex.


		Support of the phy by ifTable

		The dual phy entity on the c5K ATM line card is managed
		using the ifTable.  Specific interpretations of ifTable
		for the dual phy entity are as follows.

		Object   Use for dual phy entity
		======   =======================

		ifIndex  Each phy entity is represented by an ifEntry.

		ifDescr  Description of the phy entity.

		ifType   The value for the phy entity is other(1).

		ifSpeed  See [1].

		ifPhysAddress   An octet string of zero length, per [1].

		ifAdminStatus   See [1].

		ifOperStatus    See [1].  In addition, note that a phy can
                          be in the up state but still not be the
                          active phy.  However, the active phy will
                          always be up.

		ifLastChange    See [1].

		ifName   See [1].

		ifLinkUpDownTrapEnable     disabled(2).

		ifHighSpeed      See [1]. 

		ifConnectorPresent	true(1).


		References

		[1] McCloghrie, K. and F. Kastenholz, Evolution of the
		Interfaces Group of MIB-II, RFC 1573, Hughes LAN Systems,
		FTP Software, January 1994."
	::= { ciscoMgmt 60 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (3)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.