The ASPP MIB provides the configuration and operational
information on asynchronous polled protocols such as the
asynchronous security protocols that alarm monitoring
companies use. The protocols are handled in passthrough
mode. ASPP will handle the receiving and sending of the
asychronous blocks. It will not perform any error
checking. It is the responsibilty of the end-station to
perform any required error recovery. A generic protocol
has been created to support asychronous protocols. In
some situations this doesn't work for all types since
there is no alarm protocol standard. Specific vendor
support has been included for the following vendor's
alarm equipment and protocols:
* adplex
* adt
- PollSelect
- VariPoll
* diebold
* mdi
* mosec (mosler)
* gddb (Guang Dong Development Bank)
- This protocol is similar to Burroughs Poll/Select
The following example configuration shows how the
ASPP MIB returns ASPP information, from either CISCO A
or CISCO B.
Security == ASP == Cisco == IP == Cisco == ASP == Alarm
control A Network B Panel
station
The following entities are managed:
1) ASPP ports (serial interfaces)
The ASPP ports are identified by the interface index,
and additional information about this interface can be
obtained from the Cisco Serial Interface MIB.
Parsed from file CISCO-ASPP-MIB.mib
Module: CISCO-ASPP-MIB
The ASPP MIB provides the configuration and operational
information on asynchronous polled protocols such as the
asynchronous security protocols that alarm monitoring
companies use. The protocols are handled in passthrough
mode. ASPP will handle the receiving and sending of the
asychronous blocks. It will not perform any error
checking. It is the responsibilty of the end-station to
perform any required error recovery. A generic protocol
has been created to support asychronous protocols. In
some situations this doesn't work for all types since
there is no alarm protocol standard. Specific vendor
support has been included for the following vendor's
alarm equipment and protocols:
* adplex
* adt
- PollSelect
- VariPoll
* diebold
* mdi
* mosec (mosler)
* gddb (Guang Dong Development Bank)
- This protocol is similar to Burroughs Poll/Select
The following example configuration shows how the
ASPP MIB returns ASPP information, from either CISCO A
or CISCO B.
Security == ASP == Cisco == IP == Cisco == ASP == Alarm
control A Network B Panel
station
The following entities are managed:
1) ASPP ports (serial interfaces)
The ASPP ports are identified by the interface index,
and additional information about this interface can be
obtained from the Cisco Serial Interface MIB.
Parsed from file CISCO-ASPP-MIB.my.txt
Company: None
Module: CISCO-ASPP-MIB
The ASPP MIB provides the configuration and operational
information on asynchronous polled protocols such as the
asynchronous security protocols that alarm monitoring
companies use. The protocols are handled in passthrough
mode. ASPP will handle the receiving and sending of the
asychronous blocks. It will not perform any error
checking. It is the responsibilty of the end-station to
perform any required error recovery. A generic protocol
has been created to support asychronous protocols. In
some situations this doesn't work for all types since
there is no alarm protocol standard. Specific vendor
support has been included for the following vendor's
alarm equipment and protocols:
* adplex
* adt
- PollSelect
- VariPoll
* diebold
* mdi
* mosec (mosler)
* gddb (Guang Dong Development Bank)
- This protocol is similar to Burroughs Poll/Select
The following example configuration shows how the
ASPP MIB returns ASPP information, from either CISCO A
or CISCO B.
Security == ASP == Cisco == IP == Cisco == ASP == Alarm
control A Network B Panel
station
The following entities are managed:
1) ASPP ports (serial interfaces)
The ASPP ports are identified by the interface index,
and additional information about this interface can be
obtained from the Cisco Serial Interface MIB.
ciscoAsppMIB MODULE-IDENTITY LAST-UPDATED "200302100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The ASPP MIB provides the configuration and operational information on asynchronous polled protocols such as the asynchronous security protocols that alarm monitoring companies use. The protocols are handled in passthrough mode. ASPP will handle the receiving and sending of the asychronous blocks. It will not perform any error checking. It is the responsibilty of the end-station to perform any required error recovery. A generic protocol has been created to support asychronous protocols. In some situations this doesn't work for all types since there is no alarm protocol standard. Specific vendor support has been included for the following vendor's alarm equipment and protocols: * adplex * adt - PollSelect - VariPoll * diebold * mdi * mosec (mosler) * gddb (Guang Dong Development Bank) - This protocol is similar to Burroughs Poll/Select The following example configuration shows how the ASPP MIB returns ASPP information, from either CISCO A or CISCO B. Security == ASP == Cisco == IP == Cisco == ASP == Alarm control A Network B Panel station The following entities are managed: 1) ASPP ports (serial interfaces) The ASPP ports are identified by the interface index, and additional information about this interface can be obtained from the Cisco Serial Interface MIB." REVISION "200302100000Z" DESCRIPTION "Added Asynchronous Point of Sale(POS) to IP conversion support. The APOS protocol utilizes asynchrounous communications with 1 start, 1 stop and 7 data bits with even parity. The connection to the POS terminal will always be an asynchronous leased line. The protocol has many characteristics of BSC except it is simplified to minimize overhead on the point to point connection. The added APOS traffic will be locally acknowledged unlike the other polled asynchronous protocol which function in passthrough mode. The LRC/VRC will be verified and any necessary recovery will be done by the router. This is necessary since we are converting the protocol so the data can be passed to an IP attached host." REVISION "9508210000Z" DESCRIPTION "Initial mib for async security polled protocols." ::= { ciscoMgmt 55 }
ciscoAsppMIB OBJECT IDENTIFIER ::= { ciscoMgmt 55 }
Vendor: Cisco
Module: CISCO-ASPP-MIB
[Automatically extracted from oidview.com]
ciscoAsppMIB MODULE-IDENTITY LAST-UPDATED "200302100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The ASPP MIB provides the configuration and operational information on asynchronous polled protocols such as the asynchronous security protocols that alarm monitoring companies use. The protocols are handled in passthrough mode. ASPP will handle the receiving and sending of the asychronous blocks. It will not perform any error checking. It is the responsibilty of the end-station to perform any required error recovery. A generic protocol has been created to support asychronous protocols. In some situations this doesn't work for all types since there is no alarm protocol standard. Specific vendor support has been included for the following vendor's alarm equipment and protocols: * adplex * adt - PollSelect - VariPoll * diebold * mdi * mosec (mosler) * gddb (Guang Dong Development Bank) - This protocol is similar to Burroughs Poll/Select The following example configuration shows how the ASPP MIB returns ASPP information, from either CISCO A or CISCO B. Security == ASP == Cisco == IP == Cisco == ASP == Alarm control A Network B Panel station The following entities are managed: 1) ASPP ports (serial interfaces) The ASPP ports are identified by the interface index, and additional information about this interface can be obtained from the Cisco Serial Interface MIB." REVISION "200302100000Z" DESCRIPTION "Added Asynchronous Point of Sale(POS) to IP conversion support. The APOS protocol utilizes asynchrounous communications with 1 start, 1 stop and 7 data bits with even parity. The connection to the POS terminal will always be an asynchronous leased line. The protocol has many characteristics of BSC except it is simplified to minimize overhead on the point to point connection. The added APOS traffic will be locally acknowledged unlike the other polled asynchronous protocol which function in passthrough mode. The LRC/VRC will be verified and any necessary recovery will be done by the router. This is necessary since we are converting the protocol so the data can be passed to an IP attached host." REVISION "9508210000Z" DESCRIPTION "Initial mib for async security polled protocols." ::= { ciscoMgmt 55 }
ciscoAsppMIB MODULE-IDENTITY LAST-UPDATED "200302100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The ASPP MIB provides the configuration and operational information on asynchronous polled protocols such as the asynchronous security protocols that alarm monitoring companies use. The protocols are handled in passthrough mode. ASPP will handle the receiving and sending of the asychronous blocks. It will not perform any error checking. It is the responsibilty of the end-station to perform any required error recovery. A generic protocol has been created to support asychronous protocols. In some situations this doesn't work for all types since there is no alarm protocol standard. Specific vendor support has been included for the following vendor's alarm equipment and protocols: * adplex * adt - PollSelect - VariPoll * diebold * mdi * mosec (mosler) * gddb (Guang Dong Development Bank) - This protocol is similar to Burroughs Poll/Select The following example configuration shows how the ASPP MIB returns ASPP information, from either CISCO A or CISCO B. Security == ASP == Cisco == IP == Cisco == ASP == Alarm control A Network B Panel station The following entities are managed: 1) ASPP ports (serial interfaces) The ASPP ports are identified by the interface index, and additional information about this interface can be obtained from the Cisco Serial Interface MIB." REVISION "200302100000Z" DESCRIPTION "Added Asynchronous Point of Sale(POS) to IP conversion support. The APOS protocol utilizes asynchrounous communications with 1 start, 1 stop and 7 data bits with even parity. The connection to the POS terminal will always be an asynchronous leased line. The protocol has many characteristics of BSC except it is simplified to minimize overhead on the point to point connection. The added APOS traffic will be locally acknowledged unlike the other polled asynchronous protocol which function in passthrough mode. The LRC/VRC will be verified and any necessary recovery will be done by the router. This is necessary since we are converting the protocol so the data can be passed to an IP attached host." REVISION "9508210000Z" DESCRIPTION "Initial mib for async security polled protocols." ::= { ciscoMgmt 55 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.55.1 | asppObjects | 1 | 20 | None |
| 1.3.6.1.4.1.9.9.55.3 | asppMibConformance | 2 | 7 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.6 | ciscoTcpMIB | 3 | 20 | An extension to the IETF MIB module for managing TCP implementations |
| 1.3.6.1.4.1.9.9.10 | ciscoFlashMIB | 2 | 164 | This MIB provides for the management of Cisco Flash Devices. |
| 1.3.6.1.4.1.9.9.13 | ciscoEnvMonMIB | 4 | 68 | The MIB module to describe the status of the Environmental Monitor on those devices which support one. |
| 1.3.6.1.4.1.9.9.16 | ciscoPingMIB | 3 | 31 | Modified description of ciscoPingAddress object. |
| 1.3.6.1.4.1.9.9.17 | ciscoVinesMIB | 2 | 188 | " REVISION "9506070000Z |
| 1.3.6.1.4.1.9.9.18 | ciscoIsdnuIfMIB | 3 | 29 | ISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router. |
| 1.3.6.1.4.1.9.9.19 | ciscoSnapshotMIB | 2 | 28 | Snapshot routing MIB |
| 1.3.6.1.4.1.9.9.20 | channel | 2 | 169 | This is the MIB module for objects used to manage the Cisco Mainframe Channel Connection (CMCC) cards. |
| 1.3.6.1.4.1.9.9.22 | ciscoRptrMIB | 3 | 32 | " REVISION "9512050000Z |
| 1.3.6.1.4.1.9.9.23 | ciscoCdpMIB | 2 | 78 | The MIB module for management of the Cisco Discovery Protocol in Cisco devices. |
| 1.3.6.1.4.1.9.9.24 | ciscoDspuMIB | 2 | 150 | Used to define and manage DSPU objects. |
| 1.3.6.1.4.1.9.9.25 | ciscoImageMIB | 2 | 10 | Router image MIB which identify the capabilities and characteristics of the image |
| 1.3.6.1.4.1.9.9.26 | ciscoIsdnMib | 3 | 34 | The MIB module to describe the status of the ISDN Interfaces on the routers. |
| 1.3.6.1.4.1.9.9.27 | ciscoCallHistoryMib | 2 | 40 | The MIB module to describe and store the call information of the routers for accounting purposes. |
| 1.3.6.1.4.1.9.9.28 | ciscoSnaSdllcMIB | 3 | 28 | ciscoSnaSdllcMIB MODULE-IDENTITY LAST-UPDATED "9812170000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cus… |
| 1.3.6.1.4.1.9.9.29 | ciscoRsrbMIB | 3 | 45 | This is the MIB module for objects used to manage RSRB. Overview of remote source-route bridging (RSRB) management and MIB MIB … |
| 1.3.6.1.4.1.9.9.30 | ciscoStunMIB | 3 | 41 | The MIB module for serial Tunneling. Overview of STUN MIB MIB description The STUN MIB provides the configuration and operationa… |
| 1.3.6.1.4.1.9.9.31 | ciscoTcpOffloadMIB | 2 | 20 | This is the MIB module for objects used to manage the cisco tcp offload feature. The IBM mainframe (host) supports TCP/IP. As a … |
| 1.3.6.1.4.1.9.9.32 | ciscoCipTcpIpMIB | 2 | 88 | This is the MIB module for objects used to manage the cisco TCP/IP stack running on the Cisco Mainframe Channel Connection (CMCC)… |
| 1.3.6.1.4.1.9.9.33 | ciscoCipCsnaMIB | 3 | 66 | None |
| 1.3.6.1.4.1.9.9.34 | ciscoCipLanMIB | 2 | 24 | This is the Management Information Base (MIB) module for objects used to manage the cisco internal LAN support in Cisco Mainframe… |
| 1.3.6.1.4.1.9.9.35 | ciscoBstunMIB | 3 | 71 | The MIB module for Block Serial Tunneling. Overview of BSTUN MIB MIB description The BSTUN MIB provides the configuration and o… |
| 1.3.6.1.4.1.9.9.36 | ciscoBscMIB | 2 | 46 | The MIB module for BSC. Overview of BSC MIB MIB description The BSC MIB provides the configuration and operational information on… |
| 1.3.6.1.4.1.9.9.37 | ciscoQueueMIB | 3 | 23 | This is the MIB module for objects used to manage interface queuing in Cisco devices. |
| 1.3.6.1.4.1.9.9.38 | ciscoLecsMIB | 2 | 77 | The MIB module for the management of LANE Configuration in Cisco devices. |
| 1.3.6.1.4.1.9.9.39 | ciscoLesMIB | 2 | 82 | The MIB module for the management of LANE Service in Cisco devices. |
| 1.3.6.1.4.1.9.9.40 | ciscoBusMIB | 2 | 37 | The MIB module for the management of LANE broadcast and unknown servers. |
| 1.3.6.1.4.1.9.9.41 | ciscoSyslogMIB | 3 | 49 | The MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs. |
| 1.3.6.1.4.1.9.9.42 | ciscoRttMonMIB | 3 | 816 | This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols. The table struc… |
| 1.3.6.1.4.1.9.9.43 | ciscoConfigManMIB | 3 | 75 | Configuration management MIB. The MIB represents a model of configuration data that exists in various locations: running in use b… |
| 1.3.6.1.4.1.9.9.44 | ciscoICsuDsuMIB | 4 | 70 | Integrated CSU/DSU MIB module. For T1 and Switched 56 kbps interfaces. |
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | 2 | 39 | A minimal set of managed objects for tracking the status of DS3/E3/DS1/E1 and SONET interfaces. |
| 1.3.6.1.4.1.9.9.46 | ciscoVtpMIB | 3 | 261 | The MIB module for entities implementing the VTP protocol and Vlan management. |
| 1.3.6.1.4.1.9.9.47 | ciscoModemMgmtMIB | 3 | 112 | This MIB module provides modem call related data for tracking the progress and status of a call. |
| 1.3.6.1.4.1.9.9.48 | ciscoMemoryPoolMIB | 3 | 32 | MIB module for monitoring memory pools |
| 1.3.6.1.4.1.9.9.49 | ciscoFrameRelayMIB | 2 | 158 | Cisco Frame Relay MIB |
| 1.3.6.1.4.1.9.9.50 | ciscoAtmServiceRegistryMIB | 2 | 14 | A MIB module to allow an NMS to monitor and configure the information which an ATM switch makes available via the ILMI's Service … |
| 1.3.6.1.4.1.9.9.51 | ciscoAtmSwAddrMIB | 2 | 11 | ATM Switch address MIB |
| 1.3.6.1.4.1.9.9.52 | ciscoIpEncryptionMIB | 3 | 51 | Used to manage the encryption feature. |
| 1.3.6.1.4.1.9.9.53 | ciscoVmpsMIB | 3 | 55 | The MIB module for the management of the VLAN Membership Policy Server. |
| 1.3.6.1.4.1.9.9.54 | ciscoTn3270ServerMIB | 3 | 105 | The MIB module for TN3270 Server. MIB description The PU and LU MIB are defined in RFC 1666. This MIB provides additional informa… |
| 1.3.6.1.4.1.9.9.56 | ciscoVlanBridgingMIB | 2 | 13 | A set of managed objects for optimizing access to bridging related data from RFC 1493. This MIB is modeled after portions of RFC… |
| 1.3.6.1.4.1.9.9.57 | ciscoCompressionServiceAdapterMIB | 2 | 19 | Used to manage the compression service adapter. |
| 1.3.6.1.4.1.9.9.59 | ciscoStackMakerMIB | 2 | 15 | The MIB module for Cisco Systems' StackMaker. |
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | 3 | 26 | Initial version of this MIB module. Phy definition Throughout this document phy is used as an abbreviation for Physical Interface.… |
| 1.3.6.1.4.1.9.9.61 | ciscoAccessEnvMonMIB | 3 | 13 | The MIB module to describe the additional status of the Environmental Monitor on those Cisco Access devices which support one. |
| 1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | 2 | 90 | Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router. |
| 1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | 3 | 377 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing management of voice telephony peers on both a circuit-s… |
| 1.3.6.1.4.1.9.9.64 | ciscoVoiceInterfaceMIB | 2 | 24 | Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN inte… |
| 1.3.6.1.4.1.9.9.65 | ciscoPnniMIB | 2 | 49 | The MIB module for managing Cisco specific extensions to the ATM Forum PNNI MIB. |
| 1.3.6.1.4.1.9.9.66 | ciscoAal5MIB | 2 | 25 | Cisco Enterprise AAL5 MIB file that provide AAL5 specific information that are either excluded by RFC 1695 or specific to Cisco p… |
| 1.3.6.1.4.1.9.9.67 | ciscoAtmAccessListMIB | 2 | 39 | A cisco ATM access list mib module. |
| 1.3.6.1.4.1.9.9.68 | ciscoVlanMembershipMIB | 3 | 90 | The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McClog… |
| 1.3.6.1.4.1.9.9.69 | ciscoLecDataVccMIB | 3 | 13 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. This extension identifies those VCCs which are being us… |
| 1.3.6.1.4.1.9.9.72 | ciscoCipCmpcMIB | 3 | 46 | This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cis… |
| 1.3.6.1.4.1.9.9.73 | ciscoCipTgMIB | 2 | 98 | This is the Management Information Base (MIB) module for objects used to manage Transmission Groups (TGs) in Cisco Mainframe Chan… |
| 1.3.6.1.4.1.9.9.74 | ciscoDlswExtMIB | 3 | 134 | The MIB module for management of Cisco specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795 and RFC… |
| 1.3.6.1.4.1.9.9.76 | ciscoDlcSwitchMIB | 2 | 55 | This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or end… |
| 1.3.6.1.4.1.9.9.77 | ciscoLecExtMIB | 3 | 12 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. |
| 1.3.6.1.4.1.9.9.78 | ciscoAtmSigDiagMIB | 2 | 58 | The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains infor… |
| 1.3.6.1.4.1.9.9.80 | ciscoFtpClientMIB | 2 | 29 | The MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes. |
| 1.3.6.1.4.1.9.9.81 | ciscoBulkFileMIB | 3 | 63 | The MIB module for creating and deleting bulk files of SNMP data for file transfer. |
| 1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | 3 | 300 | The MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP). |
| 1.3.6.1.4.1.9.9.83 | ciscoWredMIB | 2 | 26 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop is a method which avoids traffic congestion on an output int… |
| 1.3.6.1.4.1.9.9.84 | ciscoIpStatMIB | 2 | 34 | Cisco IP Statistics MIB - Overview This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in… |
| 1.3.6.1.4.1.9.9.85 | ciscoCasIfMIB | 2 | 119 | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel … |
| 1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | 4 | 141 | ciscoDspMgmtMIB MODULE-IDENTITY LAST-UPDATED "200008140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cu… |
| 1.3.6.1.4.1.9.9.87 | ciscoC2900MIB | 3 | 133 | The MIB module for Catalyst 2900 enterprise specific information |
| 1.3.6.1.4.1.9.9.88 | ciscoAtmExtMIB | 3 | 50 | ciscoAtmExtMIB MODULE-IDENTITY LAST-UPDATED "9706200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custo… |
| 1.3.6.1.4.1.9.9.89 | csCugMIB | 2 | 24 | This MIB module is for closed user group support (virtual private networks). |
| 1.3.6.1.4.1.9.9.91 | entitySensorMIB, ciscoEntitySensorMIB | 3 | 42 | The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable. |
| 1.3.6.1.4.1.9.9.92 | ciscoEntityAssetMIB | 3 | 29 | Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. |
| 1.3.6.1.4.1.9.9.94 | ciscoAtmPvcMIB | 2 | 19 | PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alt… |
| 1.3.6.1.4.1.9.9.95 | ciscoAlpsMIB | 3 | 222 | The MIB module for Airline Protocol Support. ************************************************************** * … |
| 1.3.6.1.4.1.9.9.96 | ciscoConfigCopyMIB | 3 | 40 | This MIB facilitates writing of configuration files of an SNMP Agent running Cisco's IOS in the following ways: to and from the n… |
| 1.3.6.1.4.1.9.9.97 | ciscoSwitchEngineMIB | 3 | 385 | This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switch… |
| 1.3.6.1.4.1.9.9.98 | ciscoPagpMIB | 2 | 52 | The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features a… |
| 1.3.6.1.4.1.9.9.99 | ciscoLocalDirectorMIB | 3 | 88 | The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balan… |
| 1.3.6.1.4.1.9.9.101 | ciscoSwitchCgmpMIB | 2 | 18 | Switch-side Cisco Group Management Protocol MIB for Layer 2 Switch devices. |
| 1.3.6.1.4.1.9.9.102 | ciscoMediaMailDialControlMIB | 2 | 63 | This MIB module enhances the IETF Dial Control MIB (RFC2128) for providing management of dial peers on both a circuit-switched te… |
| 1.3.6.1.4.1.9.9.103 | ciscoRmonConfigMIB | 3 | 123 | This module defines configuration extensions for some of the IETF RMON MIBs. The following terms are used throughout this MIB: A S… |
| 1.3.6.1.4.1.9.9.105 | ciscoC8500RedundancyMIB | 3 | 49 | This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar im… |
| ... | ||||