This object indicates the role or state of a REP port depending
on its link status and whether it is forwarding or blocking
traffic.
'failedPort' - a port with a non-operational link status,
such that no traffic is forwarded on it.
'alternatePort' - a port forwarding traffic only for a subset of
VLANs, for the purpose of VLAN load balancing.
'openPort' - a port forwarding traffic for all VLANs.
Parsed from file CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB.mib
Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
This object indicates the role or state of a REP port depending
on its link status and whether it is forwarding or blocking
traffic.
'failedPort' - a port with a non-operational link status,
such that no traffic is forwarded on it.
'alternatePort' - a port forwarding traffic only for a subset of
VLANs, for the purpose of VLAN load balancing.
'openPort' - a port forwarding traffic for all VLANs.
'failedPortNoNeighbor' - a port with a non-operational link
status and does not have a external
neighbor.
'failedPortLogicalOpen' - a port with a non-operational link
status and does not have a external
neighbor but is in forwarding state
for traffic.
This object indicates the role or state of a REP port depending
on its link status and whether it is forwarding or blocking
traffic.
'failedPort' - a port with a non-operational link status,
such that no traffic is forwarded on it.
'alternatePort' - a port forwarding traffic only for a subset of
VLANs, for the purpose of VLAN load balancing.
'openPort' - a port forwarding traffic for all VLANs.
Parsed from file CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB.my.txt
Company: None
Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
This object indicates the role or state of a REP port depending
on its link status and whether it is forwarding or blocking
traffic.
'failedPort' - a port with a non-operational link status,
such that no traffic is forwarded on it.
'alternatePort' - a port forwarding traffic only for a subset of
VLANs, for the purpose of VLAN load balancing.
'openPort' - a port forwarding traffic for all VLANs.
'failedPortNoNeighbor' - a port with a non-operational link
status and does not have a external
neighbor.
'failedPortLogicalOpen' - a port with a non-operational link
status and does not have a external
neighbor but is in forwarding state
for traffic.
crepIfPortRole OBJECT-TYPE SYNTAX INTEGER { failedPort(1), alternatePort(2), openPort(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the role or state of a REP port depending on its link status and whether it is forwarding or blocking traffic. 'failedPort' - a port with a non-operational link status, such that no traffic is forwarded on it. 'alternatePort' - a port forwarding traffic only for a subset of VLANs, for the purpose of VLAN load balancing. 'openPort' - a port forwarding traffic for all VLANs." ::= { crepInterfaceConfigEntry 4 }
crepIfPortRole OBJECT-TYPE SYNTAX INTEGER { failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the role or state of a REP port depending on its link status and whether it is forwarding or blocking traffic. 'failedPort' - a port with a non-operational link status, such that no traffic is forwarded on it. 'alternatePort' - a port forwarding traffic only for a subset of VLANs, for the purpose of VLAN load balancing. 'openPort' - a port forwarding traffic for all VLANs. 'failedPortNoNeighbor' - a port with a non-operational link status and does not have a external neighbor. 'failedPortLogicalOpen' - a port with a non-operational link status and does not have a external neighbor but is in forwarding state for traffic." ::= { crepInterfaceConfigEntry 4 }
Vendor: Cisco
Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
[Automatically extracted from oidview.com]
crepIfPortRole OBJECT-TYPE SYNTAX INTEGER { failedPort(1), alternatePort(2), openPort(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the role or state of a REP port depending on its link status and whether it is forwarding or blocking traffic. 'failedPort' - a port with a non-operational link status, such that no traffic is forwarded on it. 'alternatePort' - a port forwarding traffic only for a subset of VLANs, for the purpose of VLAN load balancing. 'openPort' - a port forwarding traffic for all VLANs." ::= { crepInterfaceConfigEntry 4 }
crepIfPortRole OBJECT-TYPE SYNTAX INTEGER { failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the role or state of a REP port depending on its link status and whether it is forwarding or blocking traffic. 'failedPort' - a port with a non-operational link status, such that no traffic is forwarded on it. 'alternatePort' - a port forwarding traffic only for a subset of VLANs, for the purpose of VLAN load balancing. 'openPort' - a port forwarding traffic for all VLANs. 'failedPortNoNeighbor' - a port with a non-operational link status and does not have a external neighbor. 'failedPortLogicalOpen' - a port with a non-operational link status and does not have a external neighbor but is in forwarding state for traffic." ::= { crepInterfaceConfigEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.601.1.2.1.1.1 | crepIfIndex | 0 | 0 | This object identifies the ifIndex-value assigned to the interface. |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.2 | crepIfSegmentId | 0 | 0 | This object specifies the segment that the interface is part. This object can be modified when crepIfConfigRowStatus is 'active'… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.3 | crepIfOperStatus | 0 | 0 | This object indicates the current operational link state of the REP port. If a REP configured interface is down, it will be in '… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.5 | crepIfPortID | 0 | 0 | This object indicates the REP port identifier automatically assigned by REP when enabled. |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.6 | crepIfAdminEdgePortType | 0 | 0 | This object specifies the configured edge port type for the interface. |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.7 | crepIfOperEdgePortType | 0 | 0 | This object indicates the actual edge port type for the interface. Value 'edge' indicates that the port is secondary edge port. |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.8 | crepIfPreferredConfig | 0 | 0 | This object specifies if port should get preference to become the alternate port among other equal ports in the segment. Setting … |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.9 | crepifBlockedVlans1k | 0 | 0 | This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 0 through 1023. … |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.10 | crepifBlockedVlans2k | 0 | 0 | This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 1024 through 2047… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.11 | crepifBlockedVlans3k | 0 | 0 | This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 2048 through 3071… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.12 | crepifBlockedVlans4k | 0 | 0 | This object specifies the list of VLANs configured to be blocked at the alternate port for VLANs with values of 3072 through 4095… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.13 | crepLoadBalanceBlockPortType | 0 | 0 | This object specifies the method defined to identify the alternate port in the segment that takes part in VLAN load balancing by … |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.14 | crepBlockPortNumInfo | 0 | 0 | This object specifies the offset of the port in the segment to be blocked for VLAN load balancing. Positive numbers indicate the… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.15 | crepBlockPortIdInfo | 0 | 0 | This object specifies the port identifier of the port in the segment to be blocked for VLAN load balancing. 'crepIfPortID' objec… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.16 | crepIfPreemptDelayTimer | 0 | 0 | This object specifies the interval of time that REP waits before triggering preemption after the segment is complete. The value -… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.17 | crepIfStcnPropagateToSTP | 0 | 0 | This object specifies if the REP edge propagates the segment topology change notifications to the spanning tree network. This valu… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.18 | crepIfStcnPropagateToOtherSegs | 0 | 0 | This object specifies the list of segments to which the REP edge propagates the segment topology change notifications. This value… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.19 | crepIfStcnPropagateToIf | 0 | 0 | This object specifies the interface to which the REP edge should propagate the segment topology change notifications. The interfa… |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.20 | crepIfConfigRowStatus | 0 | 0 | This object is used to manage the creation, deletion, and modification of rows in this table. A row may be created using the 'Cre… |