Reference record for OID 1.3.6.1.4.1.9.9.689


parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
node code
689
node name
ciscoSlbDfpMIB
dot oid
1.3.6.1.4.1.9.9.689
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoSlbDfpMIB(689)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoSlbDfpMIB
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/689

    Description by circitor

    This MIB reports the congestion status of the real server.
    A server can be in congested state due to high memory
    consumption, high CPU utilization or high number of clients
    being served by it. Congestion can cause delay in server
    response time.
    DFP (Dynamic Feedback Protocol) weight values are used as a
    metric to monitor the congestion of the server.

    This MIB generates notifications when congestion state
    is detected on the real server.
    DFP weight is calculated as follows

    BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings

    CPUMemWeight=(cpu + mem)/32

    Weight = BindingWeight*CPUMemWeight*dfp_max_weight

    Here,
    - Maxbindings is the maximum number of bindings allowed on the
    server.
    - dfp_max_weight is the maximum possible value of DFP weight
    (24).
    - numberOfBindings is the number of mobile bindings currently
    present with the server.

    The DFP weight at which congestion is detected is configurable.
    If the DFP weight of the system falls below this value, then
    the system is treated as congested and notification is
    generated.

    Parsed from file CISCO-SLB-DFP-MIB.mib
    Module: CISCO-SLB-DFP-MIB

    Description by mibdepot

    This MIB reports the congestion status of the real server.
    A server can be in congested state due to high memory
    consumption, high CPU utilization or high number of clients
    being served by it. Congestion can cause delay in server
    response time.
    DFP (Dynamic Feedback Protocol) weight values are used as a
    metric to monitor the congestion of the server.

    This MIB generates notifications when congestion state
    is detected on the real server.
    DFP weight is calculated as follows

    BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings

    CPUMemWeight=(cpu + mem)/32

    Weight = BindingWeight*CPUMemWeight*dfp_max_weight

    Here,
    - Maxbindings is the maximum number of bindings allowed on the
    server.
    - dfp_max_weight is the maximum possible value of DFP weight
    (24).
    - numberOfBindings is the number of mobile bindings currently
    present with the server.

    The DFP weight at which congestion is detected is configurable.
    If the DFP weight of the system falls below this value, then
    the system is treated as congested and notification is
    generated.

    Parsed from file CISCO-SLB-DFP-MIB.my.txt
    Company: None
    Module: CISCO-SLB-DFP-MIB

    Description by cisco

    This MIB reports the congestion status of the real server.
    A server can be in congested state due to high memory
    consumption, high CPU utilization or high number of clients
    being served by it. Congestion can cause delay in server
    response time.
    DFP (Dynamic Feedback Protocol) weight values are used as a
    metric to monitor the congestion of the server.

    This MIB generates notifications when congestion state
    is detected on the real server.
    DFP weight is calculated as follows

    BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings

    CPUMemWeight=(cpu + mem)/32

    Weight = BindingWeight*CPUMemWeight*dfp_max_weight

    Here,
    - Maxbindings is the maximum number of bindings allowed on the
    server.
    - dfp_max_weight is the maximum possible value of DFP weight
    (24).
    - numberOfBindings is the number of mobile bindings currently
    present with the server.

    The DFP weight at which congestion is detected is configurable.
    If the DFP weight of the system falls below this value, then
    the system is treated as congested and notification is
    generated.

    Information by circitor

    ciscoSlbDfpMIB MODULE-IDENTITY LAST-UPDATED "200901290000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal:170 W. Tasman Drive San Jose, CA 95134 USA Tel:+1 800 553-NETS E-mail:[email protected]" DESCRIPTION "This MIB reports the congestion status of the real server. A server can be in congested state due to high memory consumption, high CPU utilization or high number of clients being served by it. Congestion can cause delay in server response time. DFP (Dynamic Feedback Protocol) weight values are used as a metric to monitor the congestion of the server. This MIB generates notifications when congestion state is detected on the real server. DFP weight is calculated as follows BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings CPUMemWeight=(cpu + mem)/32 Weight = BindingWeight*CPUMemWeight*dfp_max_weight Here, - Maxbindings is the maximum number of bindings allowed on the server. - dfp_max_weight is the maximum possible value of DFP weight (24). - numberOfBindings is the number of mobile bindings currently present with the server. The DFP weight at which congestion is detected is configurable. If the DFP weight of the system falls below this value, then the system is treated as congested and notification is generated." REVISION "200901290000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 689 }

    Information by cisco_v1

    ciscoSlbDfpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 689 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-SLB-DFP-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoSlbDfpMIB MODULE-IDENTITY LAST-UPDATED "200901290000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal:170 W. Tasman Drive San Jose, CA 95134 USA Tel:+1 800 553-NETS E-mail:[email protected]" DESCRIPTION "This MIB reports the congestion status of the real server. A server can be in congested state due to high memory consumption, high CPU utilization or high number of clients being served by it. Congestion can cause delay in server response time. DFP (Dynamic Feedback Protocol) weight values are used as a metric to monitor the congestion of the server. This MIB generates notifications when congestion state is detected on the real server. DFP weight is calculated as follows BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings CPUMemWeight=(cpu + mem)/32 Weight = BindingWeight*CPUMemWeight*dfp_max_weight Here, - Maxbindings is the maximum number of bindings allowed on the server. - dfp_max_weight is the maximum possible value of DFP weight (24). - numberOfBindings is the number of mobile bindings currently present with the server. The DFP weight at which congestion is detected is configurable. If the DFP weight of the system falls below this value, then the system is treated as congested and notification is generated." REVISION "200901290000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 689 }

    Information by cisco

    ciscoSlbDfpMIB MODULE-IDENTITY LAST-UPDATED "200901290000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal:170 W. Tasman Drive San Jose, CA 95134 USA Tel:+1 800 553-NETS E-mail:[email protected]" DESCRIPTION "This MIB reports the congestion status of the real server. A server can be in congested state due to high memory consumption, high CPU utilization or high number of clients being served by it. Congestion can cause delay in server response time. DFP (Dynamic Feedback Protocol) weight values are used as a metric to monitor the congestion of the server. This MIB generates notifications when congestion state is detected on the real server. DFP weight is calculated as follows BindingWeight=(Maxbindings-numberOfBindings)/Maxbindings CPUMemWeight=(cpu + mem)/32 Weight = BindingWeight*CPUMemWeight*dfp_max_weight Here, - Maxbindings is the maximum number of bindings allowed on the server. - dfp_max_weight is the maximum possible value of DFP weight (24). - numberOfBindings is the number of mobile bindings currently present with the server. The DFP weight at which congestion is detected is configurable. If the DFP weight of the system falls below this value, then the system is treated as congested and notification is generated." REVISION "200901290000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 689 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.689.0 ciscoSlbDfpMIBNotifs 2 2 None
    1.3.6.1.4.1.9.9.689.1 ciscoSlbDfpMIBObjects 4 11 None
    1.3.6.1.4.1.9.9.689.2 ciscoSlbDfpMIBConform 2 6 None

    Brothers (645)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.9.9.639 ciscoOtnIfMIB 3 137 This MIB module defines the managed objects for physical layer
    characteristics of DWDM optical channel interfaces and performanc…
    1.3.6.1.4.1.9.9.640 ciscoImageLicenseMgmtMIB 3 31 The MIB module for managing the running image level
    of a Cisco device. Cisco's licensing mechanism provides
    flexibility to run a …
    1.3.6.1.4.1.9.9.642 ciscoBridgeDomainMIB 3 24 A bridge domain is one of the means by which it is possible
    to define a broadcast domain on a bridging device. It is an
    alternati…
    1.3.6.1.4.1.9.9.643 ciscoTelepresenceMIB 3 119 The MIB module defines the managed objects for a
    Telepresence system.

    Telepresence refers to a set of technologies which
    allow a p…
    1.3.6.1.4.1.9.9.644 ciscoTelepresenceCallMIB 3 178 The MIB module defines the managed objects for
    Telepresence calls.

    Telepresence refers to a set of technologies which
    allow a pers…
    1.3.6.1.4.1.9.9.645 ciscoEtherExtMIB 3 18 The MIB module to describe generic objects for
    ethernet-like network interfaces.

    This MIB provides ethernet-like network interfac…
    1.3.6.1.4.1.9.9.646 ciscoAonStatusMIB 3 80 This MIB module defines managed objects that facilitate the
    management of AON node.

    The information available through this MIB in…
    1.3.6.1.4.1.9.9.647 ciscoGgsnExtMIB 3 212 This MIB module extends the CISCO-GGSN-MIB.

    This MIB module manages the Gateway GPRS Support
    Node (GGSN) devices.

    A GGSN device pr…
    1.3.6.1.4.1.9.9.648 ciscoVirtualInterfaceMIB 2 32 The MIB module for creation and deletion of Virtual Interfaces
    and Virtual Interface Groups. In addition to this MIB,
    interface …
    1.3.6.1.4.1.9.9.650 ciscoL4L7moduleRedundancyMIB 3 71 The L4-7 SLB devices are used
    for scaling websites, building web
    enabled applications, and migrating
    to web services. The followin…
    1.3.6.1.4.1.9.9.651 ciscoCommonRolesExtMIB 3 37 A MIB Module for managing the roles that are common
    between access methods like Command Line Interface (CLI),
    SNMP and XML interf…
    1.3.6.1.4.1.9.9.652 ciscoSwitchStatsMIB 3 106 The MIB module provides management information for
    configuration and monitoring of traffic statistics
    on Cisco's switching device…
    1.3.6.1.4.1.9.9.653 ciscoAdmissionPolicyMIB 3 36 This MIB module defines managed objects that facilitate
    the management of policies upon host(s) admission to
    a network.

    The inform…
    1.3.6.1.4.1.9.9.654 ciscoMabMIB 3 20 MIB module for monitoring and configuring MAC
    Authentication Bypass (MAB) feature in the system.

    MAC Auth Bypass feature provides…
    1.3.6.1.4.1.9.9.655 ciscoDigitalMediaSystemsMIB 3 195 Acronyms and Definitions

    The following acronyms and terms are used in this
    document:

    DMS: Digital Media Systems

    DAM: Digital As…
    1.3.6.1.4.1.9.9.656 ciscoAuthFrameworkMIB 3 117 MIB module for Authentication Framework in the system.

    Authentication Framework provides generic configurations
    for authenticatio…
    1.3.6.1.4.1.9.9.657 ciscoSbcCallStatsMIB 3 201 The main purpose of this MIB is to define the statistics
    information for Session Border Controller application. The
    statistics ar…
    1.3.6.1.4.1.9.9.658 ciscoSessBorderCtrlrEventMIB 3 208 The main purpose of this MIB is to define the SNMP
    notifications and alarms generated by Session Border Controller
    application an…
    1.3.6.1.4.1.9.9.660 ciscoNportVirtualizationMIB 3 19 The MIB module for the management of N_port
    Virtualization or NPV within the framework of Cisco's
    N_port virtualization (NPV) Arc…
    1.3.6.1.4.1.9.9.661 ciscoWan3gMIB 3 378 This MIB module provides network management
    support for Cisco cellular 3G WAN products.

    *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS …
    1.3.6.1.4.1.9.9.662 ciscoCbpTcMIB 0 0 This MIB module defines textual conventions used by the
    CISCO-CBP-BASE-CFG-MIB, CISCO-CBP-BASE-MON-MIB, and any MIB
    modules exten…
    1.3.6.1.4.1.9.9.663 ciscoSwitchHardwareCapacityMIB 3 141 This MIB module defines the managed objects for hardware
    capacity of Cisco switching devices. The hardware
    capacity information c…
    1.3.6.1.4.1.9.9.664 ciscoMmodalContactAppsMIB 3 359 The Cisco Unified Multi-Modal Contact Applications (MMCA) platform is
    a highly scalable, modular, extensible, open and secure pl…
    1.3.6.1.4.1.9.9.667 ciscoServiceControllerMIB 2 31 This MIB module defines objects describing traffic controllers
    used by a service control entity.

    A service control entity is a ne…
    1.3.6.1.4.1.9.9.668 ciscoP2PIfMIB 3 16 The Point to Point Interface MIB module.
    This MIB manages the generic objects for
    Serial link or SONET/SDH like point to point ne…
    1.3.6.1.4.1.9.9.669 ciscoCdmaPdsnExtMIB 3 178 This MIB is an extension to the
    CISCO-CDMA-PDSN-MIB. A CDMA
    network supports wireless data
    communication through 3G CDMA radio
    acc…
    1.3.6.1.4.1.9.9.670 ciscoReportIntervalTcMIB 0 0 CISCO-REPORT-INTERVAL-TC-MIB
    1.3.6.1.4.1.9.9.672 ciscoMobilityTapMIB 3 24 This module manages Cisco's intercept feature for
    Mobility Gateway Products.

    This MIB is used along with CISCO-TAP2-MIB MIB to
    int…
    1.3.6.1.4.1.9.9.673 ciscoFCoEMIB 2 45 This MIB module is for configuring and monitoring Fibre Channel
    over Ethernet (FCoE) related entities. This MIB defines the
    Virtu…
    1.3.6.1.4.1.9.9.679 ciscoIeee8021CfmExtMIB 3 55 A MIB module for extending the IEEE8021-CFM-MIB
    and IEEE8021-CFM-V2-MIB to add objects which provide
    additional information about…
    1.3.6.1.4.1.9.9.680 ciscoNhrpExtMIB 3 36 This MIB module is an extension of the NHRP MIB module as
    defined in RFC 2677. It defines notifications associated with
    critical …
    1.3.6.1.4.1.9.9.683 ciscoEnergywiseMIB 3 162 The MIB is used to manage and optimize power usage
    in networks.

    Cisco EnergyWise is a specification of data, discovery and
    protoco…
    1.3.6.1.4.1.9.9.686 ciscoLwappInterfaceMIB 3 27 ciscoLwappInterfaceMIB MODULE-IDENTITY
    LAST-UPDATED "200901090000Z"
    ORGANIZATION "Cisco Systems Inc."
    CONTACT-INFO
    "Cisco Syste…
    1.3.6.1.4.1.9.9.688 ciscoFlowMonitorTcMIB 0 0 This MIB module defines textual conventions used by the MIB
    modules defining objects describing flow monitoring.

    GLOSSARY
    ========…
    1.3.6.1.4.1.9.9.690 ciscoMobilePolicyChargingControlMIB 3 143 Mobile PCC Infrastructure built on top of Policy Shim Layer, is
    a common interface to send and receive PCC related messages for
    a…
    1.3.6.1.4.1.9.9.691 ciscoEthernetFabricExtenderMIB 3 23 The MIB module for configuring one or more fabric
    extenders to connect into a core switch. Since fabric
    extenders might not be m…
    1.3.6.1.4.1.9.9.692 ciscoFlowMonitorMIB 4 195 This MIB module defines objects that describe flow monitoring.
    A typical application of this MIB module will facilitate
    monitorin…
    1.3.6.1.4.1.9.9.693 ciscoServiceControlAttackMIB 3 55 This MIB provides data related to different types of
    attacks detected by a service control entity.

    A service control entity is a …
    1.3.6.1.4.1.9.9.694 ciscoCtsTcMIB 0 0 This module defines the textual conventions used within
    Cisco Trusted Security framework.
    1.3.6.1.4.1.9.9.695 ciscoGtcapMIB 3 194 The MIB for Transaction Capabilities(TCAP)
    messages transported over Signalling System
    No. 7 (SS7) Network via Cisco IP Transfer
    P…
    1.3.6.1.4.1.9.9.696 ciscoBootHwDiagsMIB 3 22 This MIB is used to configure those devices that support
    boot-time hardware diagnostics. It provides the reports
    about the respe…
    1.3.6.1.4.1.9.9.697 ciscoIpCbrMetricsMIB 4 42 This MIB module defines objects that describe the a set of
    metrics used to measure the quality of a IP CBR traffic flow. An
    IP CB…
    1.3.6.1.4.1.9.9.698 ciscoObmiMIB 3 60 The On-Board Management Interface (OBMI) provides an
    out-of-band communications channel (in Cisco terms:
    a console port), that is…
    1.3.6.1.4.1.9.9.699 ciscoMdiMetricsMIB 4 46 This MIB module defines objects that describe the Media
    Delivery Index (MDI). The MDI [RFC4445] measurement describes
    the qualit…
    1.3.6.1.4.1.9.9.700 ciscoCableL2vpnMIB 3 28 This MIB module defines managed objects that facilitate
    the management of Cisco devices complying to the DOCSIS
    L2VPN Feature for…
    1.3.6.1.4.1.9.9.701 ciscoSeuMitigationMIB 3 51 This MIB reports the status of non-automatic and automatic,
    rate-adaptive Single Event Upset (SEU) mitigation algorithms and
    adju…
    1.3.6.1.4.1.9.9.702 ciscoSanBaseSvcMIB 3 57 Common MIB module to manage services in Storage Area
    Network (SAN). Service is deployed on service
    nodes on multiple switches fo…
    1.3.6.1.4.1.9.9.703 ciscoRtpMetricsMIB 4 61 This MIB module defines objects that describe the quality
    metrics of RTP streams, similar to those described by an RTCP
    Receiver …
    1.3.6.1.4.1.9.9.706 ciscoInterfaceXcvrMonitorMIB 3 33 A MIB module that provides monitoring information
    about the transceivers plugged into interface on a
    system.
    1.3.6.1.4.1.9.9.708 ciscoContentDeliveryStreamingMIB 2 30 This MIB instrumentation is for managing the Content Delivery
    and Streaming functionality on Cisco devices.

    Contents are ingested…
    1.3.6.1.4.1.9.9.709 ciscoVlanGroupMIB 3 18 MIB module for monitoring and configuring VLAN Group Mapping
    information.
    1.3.6.1.4.1.9.9.710 ciscoVirtualNicMIB 3 36 This MIB module defines MIB objects which provide
    mechanisms to manage the parameters used by or
    related to Virtual NIC.

    Virtual s…
    1.3.6.1.4.1.9.9.711 ciscoVrfMIB 3 48 The MIB module for provisioning and managing network
    virtualization features.

    This module provides manageability for VRF, VRF-Lit…
    1.3.6.1.4.1.9.9.712 ciscoWirelessNotificationMIB 3 30 This MIB is intended to be implemented on those Network
    Management applications that manage a network of wireless
    devices through…
    1.3.6.1.4.1.9.9.713 ciscoTrustSecPolicyMIB 3 204 This MIB module defines managed objects that facilitate the
    management of various policies within the Cisco Trusted Security
    (Tru…
    1.3.6.1.4.1.9.9.714 ciscoHwModuleControlMIB 3 27 The MIB module providing configuration and control
    information for management of hardware modules and
    components on Cisco devices…
    1.3.6.1.4.1.9.9.715 ciscoEntityQfpMIB 3 82 This MIB module defines managed objects that facilitate the
    management of Quantum Flow Processors (QFP), which are listed
    in the …
    1.3.6.1.4.1.9.9.716 ciscoVoIpTapMIB 3 18 This module manages Cisco's intercept feature for Voice
    over IP (VoIP). This MIB is used along with CISCO-TAP2-MIB
    to intercept V…
    1.3.6.1.4.1.9.9.718 ciscoCuicappsMIB 3 130 The Cisco Unified Intelligence Center (CUIC) is a scalable
    robust and secure reporting solution for contact center
    applications.

    T…
    1.3.6.1.4.1.9.9.719 ciscoUnifiedComputingMIB 5 13463 This MIB module defines the managed objects for
    Unified Computing System (UCS) Manager.

    Cisco UCS Manager provides centralized m…
    1.3.6.1.4.1.9.9.720 ciscoTrustSecSxpMIB 3 140 This MIB module is for the configuration and status query
    of SGT Exchange Protocol over TCP (SXPoTCP) feature of the
    device on th…
    1.3.6.1.4.1.9.9.721 ciscoMldSnoopingMIB 3 215 This MIB module defines objects that describe IGMP/MLD
    snooping.
    It provides remote network management system the ability
    to manag…
    1.3.6.1.4.1.9.9.724 cggsnGeoMIB 2 12 This MIB provide additional information for passive interface
    configured for each OSPF process, independent of object creation
    in…
    1.3.6.1.4.1.9.9.725 ciscoSmartInstallMIB 3 101 This MIB module defines managed objects that facilitate
    the management of Smart Install feature. Smart Install is a
    plug-and-pla…
    1.3.6.1.4.1.9.9.729 ciscoCdstvServicesMIB 3 21 This MIB module defines service monitoring objects that
    faciliate the management of the Cisco Content Delivery System
    for TV (CDS…
    1.3.6.1.4.1.9.9.730 ciscoTrustSecMIB 3 128 This MIB module is for the configuration of a network
    device on the Cisco Trusted Security (TrustSec) system.

    TrustSec secures a …
    1.3.6.1.4.1.9.9.731 ciscoEpcGatewayMIB 3 130 This MIB module manages the features and configuration
    for PDN Gateway(PGW) and Serving Gateway(SGW) in Evolved
    Packet Core(EPC) …
    1.3.6.1.4.1.9.9.732 ciscoDeviceLocationMIB 3 49 This MIB is used for managing location information
    of end point devices(Telepresence, IP Camera, Digital media
    player etc) connec…
    1.3.6.1.4.1.9.9.733 ciscoMeetingPlaceMIB 3 70 This MIB allows management of Cisco Unified MeetingPlace (CUMP)
    features, CUMP is the key conferencing solution component for
    Cis…
    1.3.6.1.4.1.9.9.734 ciscoGtpv2MIB 2 160 This MIB module manages the GPRS Tunneling Protocol
    version 2(GTPv2) statistics for the Evolved Packet
    Core(EPC) architecture.

    SGW…
    1.3.6.1.4.1.9.9.735 ciscoCdstvFsiMIB 3 25 This MIB module defines FSI configurartion objects that
    faciliate the management of the Cisco Content Delivery System
    for TV (CDS…
    1.3.6.1.4.1.9.9.736 ciscoRadiusExtMIB 2 51 This MIB module defines objects describing RADIUS (Remote
    Access Dialin User Service), serving as an extension of the
    following M…
    1.3.6.1.4.1.9.9.737 ciscoSwitchNetflowMIB 3 40 This MIB module defines management objects for the
    Netflow features on Cisco Layer 2 and Layer 3 devices.
    1.3.6.1.4.1.9.9.738 cmplsTeStdExtMIB 3 72 This MIB module contains Cisco specific managed object
    definitions for MPLS Traffic Engineering (TE), not contained in
    MPLS-TE-ST…
    1.3.6.1.4.1.9.9.739 ciscoCdstvIngestmgrMIB 3 69 This MIB module defines ingest manager configuration objects
    that faciliate the management of the Cisco Content Delivery
    System f…
    ...