The MIB module for creation and deletion of Virtual Interfaces
and Virtual Interface Groups. In addition to this MIB,
interface mib (rfc2863) will also contain entries for virtual
interfaces.
There are two ways virtual interfaces can be created and bound
to an interface. The MIB Object cvifGroupsSupported indicates
if a particular system supports the Virtual Interface Group
concept.
If Virtual Interface Groups are supported, then a virtual
interface is always created/deleted in conjunction with its
associated Virtual Interface Group. The Virtual Interface
Group, which may be associated to multiple virtual interfaces,
is then bound to a physical interface or another virtual
interface like an EtherChannel.
If Virtual Interface Groups are not supported, then a virtual
interface is created/deleted independently. And each virtual
interface is bound to a physical interface or another virtual
interface like an EtherChannel.
In order for a virtual interface to become operational, it must
be directly or indirectly (via its Virtual Interface Group)
bound to a physical interface or possibly to another virtual
interface such as an EtherChannel.
The cvifGroupTable is only used if the MIB object
cvifGroupsSupported indicates Virtual Interface Groups are
supported.
Parsed from file CISCO-VIRTUAL-INTERFACE-MIB.mib
Module: CISCO-VIRTUAL-INTERFACE-MIB
The MIB module for creation and deletion of Virtual Interfaces
and Virtual Interface Groups. In addition to this MIB,
interface mib (rfc2863) will also contain entries for virtual
interfaces.
There are two ways virtual interfaces can be created and bound
to an interface. The MIB Object cvifGroupsSupported indicates
if a particular system supports the Virtual Interface Group
concept.
If Virtual Interface Groups are supported, then a virtual
interface is always created/deleted in conjunction with its
associated Virtual Interface Group. The Virtual Interface
Group, which may be associated to multiple virtual interfaces,
is then bound to a physical interface or another virtual
interface like an EtherChannel.
If Virtual Interface Groups are not supported, then a virtual
interface is created/deleted independently. And each virtual
interface is bound to a physical interface or another virtual
interface like an EtherChannel.
In order for a virtual interface to become operational, it must
be directly or indirectly (via its Virtual Interface Group)
bound to a physical interface or possibly to another virtual
interface such as an EtherChannel.
The cvifGroupTable is only used if the MIB object
cvifGroupsSupported indicates Virtual Interface Groups are
supported.
Parsed from file CISCO-VIRTUAL-INTERFACE-MIB.my.txt
Company: None
Module: CISCO-VIRTUAL-INTERFACE-MIB
The MIB module for creation and deletion of Virtual Interfaces
and Virtual Interface Groups. In addition to this MIB,
interface mib (rfc2863) will also contain entries for virtual
interfaces.
There are two ways virtual interfaces can be created and bound
to an interface. The MIB Object cvifGroupsSupported indicates
if a particular system supports the Virtual Interface Group
concept.
If Virtual Interface Groups are supported, then a virtual
interface is always created/deleted in conjunction with its
associated Virtual Interface Group. The Virtual Interface
Group, which may be associated to multiple virtual interfaces,
is then bound to a physical interface or another virtual
interface like an EtherChannel.
If Virtual Interface Groups are not supported, then a virtual
interface is created/deleted independently. And each virtual
interface is bound to a physical interface or another virtual
interface like an EtherChannel.
In order for a virtual interface to become operational, it must
be directly or indirectly (via its Virtual Interface Group)
bound to a physical interface or possibly to another virtual
interface such as an EtherChannel.
The cvifGroupTable is only used if the MIB object
cvifGroupsSupported indicates Virtual Interface Groups are
supported.
ciscoVirtualInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200802270000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface mib (rfc2863) will also contain entries for virtual interfaces. There are two ways virtual interfaces can be created and bound to an interface. The MIB Object cvifGroupsSupported indicates if a particular system supports the Virtual Interface Group concept. If Virtual Interface Groups are supported, then a virtual interface is always created/deleted in conjunction with its associated Virtual Interface Group. The Virtual Interface Group, which may be associated to multiple virtual interfaces, is then bound to a physical interface or another virtual interface like an EtherChannel. If Virtual Interface Groups are not supported, then a virtual interface is created/deleted independently. And each virtual interface is bound to a physical interface or another virtual interface like an EtherChannel. In order for a virtual interface to become operational, it must be directly or indirectly (via its Virtual Interface Group) bound to a physical interface or possibly to another virtual interface such as an EtherChannel. The cvifGroupTable is only used if the MIB object cvifGroupsSupported indicates Virtual Interface Groups are supported." REVISION "200802270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 648 }
ciscoVirtualInterfaceMIB OBJECT IDENTIFIER ::= { ciscoMgmt 648 }
Vendor: Cisco
Module: CISCO-VIRTUAL-INTERFACE-MIB
[Automatically extracted from oidview.com]
ciscoVirtualInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200802270000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface mib (rfc2863) will also contain entries for virtual interfaces. There are two ways virtual interfaces can be created and bound to an interface. The MIB Object cvifGroupsSupported indicates if a particular system supports the Virtual Interface Group concept. If Virtual Interface Groups are supported, then a virtual interface is always created/deleted in conjunction with its associated Virtual Interface Group. The Virtual Interface Group, which may be associated to multiple virtual interfaces, is then bound to a physical interface or another virtual interface like an EtherChannel. If Virtual Interface Groups are not supported, then a virtual interface is created/deleted independently. And each virtual interface is bound to a physical interface or another virtual interface like an EtherChannel. In order for a virtual interface to become operational, it must be directly or indirectly (via its Virtual Interface Group) bound to a physical interface or possibly to another virtual interface such as an EtherChannel. The cvifGroupTable is only used if the MIB object cvifGroupsSupported indicates Virtual Interface Groups are supported." REVISION "200802270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 648 }
ciscoVirtualInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200802270000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface mib (rfc2863) will also contain entries for virtual interfaces. There are two ways virtual interfaces can be created and bound to an interface. The MIB Object cvifGroupsSupported indicates if a particular system supports the Virtual Interface Group concept. If Virtual Interface Groups are supported, then a virtual interface is always created/deleted in conjunction with its associated Virtual Interface Group. The Virtual Interface Group, which may be associated to multiple virtual interfaces, is then bound to a physical interface or another virtual interface like an EtherChannel. If Virtual Interface Groups are not supported, then a virtual interface is created/deleted independently. And each virtual interface is bound to a physical interface or another virtual interface like an EtherChannel. In order for a virtual interface to become operational, it must be directly or indirectly (via its Virtual Interface Group) bound to a physical interface or possibly to another virtual interface such as an EtherChannel. The cvifGroupTable is only used if the MIB object cvifGroupsSupported indicates Virtual Interface Groups are supported." REVISION "200802270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 648 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.648.1 | ciscoVirtualInterfaceMIBObjects | 2 | 23 | None |
1.3.6.1.4.1.9.9.648.2 | ciscoVirtualInterfaceMIBConformance | 2 | 7 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.598 | ciscoLwappAAAMIB | 3 | 73 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weigh… |
1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | 4 | 49 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.600 | ciscoGslbHealthMonMIB | 3 | 90 | The MIB defines objects related to global keepalive properties in GSLB devices. It contains the tables for keep alive configurat… |
1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | 3 | 77 | This MIB module defines objects required for managing Resilient Ethernet Protocol (REP). Resilient Ethernet Protocol (REP) is a C… |
1.3.6.1.4.1.9.9.602 | ciscoPacketCaptureMIB | 3 | 103 | The MIB module for the management of packet capture feature. |
1.3.6.1.4.1.9.9.603 | ciscoThreatMitigationServiceMIB | 3 | 68 | This MIB provides management information about the Threat Mitigation Service(TMS) entity named 'Consumer'. TMS is part of Cisco's… |
1.3.6.1.4.1.9.9.604 | cdot1CfmMIB | 3 | 166 | Connectivity Fault Management module for managing IEEE 802.1ag |
1.3.6.1.4.1.9.9.606 | ciscoLwappMeshLinkTestMIB | 3 | 46 | ciscoLwappMeshLinkTestMIB MODULE-IDENTITY LAST-UPDATED "200702050000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Sy… |
1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | 3 | 71 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
1.3.6.1.4.1.9.9.610 | ciscoLwappRogueMIB | 3 | 78 | This MIB is intended to be implemented on all those devices operating as Central Controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.611 | ciscoLwappDot11ClientCCXTextualConventions | 0 | 0 | This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Cont… |
1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | 3 | 17 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.613 | ciscoEvcMIB | 3 | 156 | Metro Ethernet services can support a wide range of applications and subscriber needs easily, efficiently and cost-effectively. … |
1.3.6.1.4.1.9.9.614 | ciscoLwappDot11LdapMIB | 3 | 33 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | 3 | 121 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.617 | ciscoLwappMeshStatsMIB | 4 | 98 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | 3 | 163 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.619 | ciscoLwappLocalAuthMIB | 3 | 53 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.620 | ciscoLwappMeshBatteryMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.621 | ciscoH324DialControlMIB | 2 | 34 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing H.324 call information over a telephony network. ITU-T R… |
1.3.6.1.4.1.9.9.622 | ciscoLwappDot11ClientTsMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.623 | ciscoLwappCdpMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.624 | ciscoIpSlaTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO IPSLA MIBs. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery L… |
1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | 3 | 40 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
1.3.6.1.4.1.9.9.627 | ciscoDot11RadarMIB | 3 | 25 | This MIB module is for IEEE 802.11a/h Root device, i.e. Access Point (AP) or Root Bridge. This MIB allows dynamic frequency selec… |
1.3.6.1.4.1.9.9.628 | ciscoServiceControlSubscribersMIB | 3 | 37 | This MIB provides global and specific information on subscribers managed by a service control entity, which is a network element … |
1.3.6.1.4.1.9.9.630 | ciscoTelnetServerMIB | 3 | 34 | MIB module for displaying and configuring Telnet related features in a device. Telnet is a program to log into another computer o… |
1.3.6.1.4.1.9.9.631 | ciscoServiceControlLinkMIB | 3 | 21 | This MIB module provides information about the status and configuration of links used by service control entities. The link on a … |
1.3.6.1.4.1.9.9.632 | ciscoSmeMIB | 3 | 54 | MIB module to manage Storage Media Encryption (SME) service. SME is an encryption service provided by an encryption node residing… |
1.3.6.1.4.1.9.9.633 | ciscoIpSlaAutoMIB | 3 | 57 | This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an … |
1.3.6.1.4.1.9.9.634 | ciscoServiceControlTpStatsMIB | 3 | 39 | This MIB provides information and statistics on the traffic processor(s) of a service control entity, which is a network element … |
1.3.6.1.4.1.9.9.635 | ciscoIpSlaJitterMIB | 3 | 57 | This MIB module defines templates for IP SLA operations of UDP Jitter and ICMP Jitter. The UDP Jitter operation is designed to me… |
1.3.6.1.4.1.9.9.636 | ciscoIpSlaEchoMIB | 3 | 71 | This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measu… |
1.3.6.1.4.1.9.9.637 | ciscoServiceControlRdrMIB | 3 | 56 | This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a se… |
1.3.6.1.4.1.9.9.638 | ciscoAgwMIB | 3 | 324 | This module manages Cisco's WiMAX ASN Gateway (ASN-GW). A WiMAX network supports wireless data communication through WiMAX radio … |
1.3.6.1.4.1.9.9.639 | ciscoOtnIfMIB | 3 | 137 | This MIB module defines the managed objects for physical layer characteristics of DWDM optical channel interfaces and performanc… |
1.3.6.1.4.1.9.9.640 | ciscoImageLicenseMgmtMIB | 3 | 31 | The MIB module for managing the running image level of a Cisco device. Cisco's licensing mechanism provides flexibility to run a … |
1.3.6.1.4.1.9.9.642 | ciscoBridgeDomainMIB | 3 | 24 | A bridge domain is one of the means by which it is possible to define a broadcast domain on a bridging device. It is an alternati… |
1.3.6.1.4.1.9.9.643 | ciscoTelepresenceMIB | 3 | 119 | The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a p… |
1.3.6.1.4.1.9.9.644 | ciscoTelepresenceCallMIB | 3 | 178 | The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a pers… |
1.3.6.1.4.1.9.9.645 | ciscoEtherExtMIB | 3 | 18 | The MIB module to describe generic objects for ethernet-like network interfaces. This MIB provides ethernet-like network interfac… |
1.3.6.1.4.1.9.9.646 | ciscoAonStatusMIB | 3 | 80 | This MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB in… |
1.3.6.1.4.1.9.9.647 | ciscoGgsnExtMIB | 3 | 212 | This MIB module extends the CISCO-GGSN-MIB. This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device pr… |
1.3.6.1.4.1.9.9.650 | ciscoL4L7moduleRedundancyMIB | 3 | 71 | The L4-7 SLB devices are used for scaling websites, building web enabled applications, and migrating to web services. The followin… |
1.3.6.1.4.1.9.9.651 | ciscoCommonRolesExtMIB | 3 | 37 | A MIB Module for managing the roles that are common between access methods like Command Line Interface (CLI), SNMP and XML interf… |
1.3.6.1.4.1.9.9.652 | ciscoSwitchStatsMIB | 3 | 106 | The MIB module provides management information for configuration and monitoring of traffic statistics on Cisco's switching device… |
1.3.6.1.4.1.9.9.653 | ciscoAdmissionPolicyMIB | 3 | 36 | This MIB module defines managed objects that facilitate the management of policies upon host(s) admission to a network. The inform… |
1.3.6.1.4.1.9.9.654 | ciscoMabMIB | 3 | 20 | MIB module for monitoring and configuring MAC Authentication Bypass (MAB) feature in the system. MAC Auth Bypass feature provides… |
1.3.6.1.4.1.9.9.655 | ciscoDigitalMediaSystemsMIB | 3 | 195 | Acronyms and Definitions The following acronyms and terms are used in this document: DMS: Digital Media Systems DAM: Digital As… |
1.3.6.1.4.1.9.9.656 | ciscoAuthFrameworkMIB | 3 | 117 | MIB module for Authentication Framework in the system. Authentication Framework provides generic configurations for authenticatio… |
1.3.6.1.4.1.9.9.657 | ciscoSbcCallStatsMIB | 3 | 201 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. The statistics ar… |
1.3.6.1.4.1.9.9.658 | ciscoSessBorderCtrlrEventMIB | 3 | 208 | The main purpose of this MIB is to define the SNMP notifications and alarms generated by Session Border Controller application an… |
1.3.6.1.4.1.9.9.660 | ciscoNportVirtualizationMIB | 3 | 19 | The MIB module for the management of N_port Virtualization or NPV within the framework of Cisco's N_port virtualization (NPV) Arc… |
1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | 3 | 378 | This MIB module provides network management support for Cisco cellular 3G WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS … |
1.3.6.1.4.1.9.9.662 | ciscoCbpTcMIB | 0 | 0 | This MIB module defines textual conventions used by the CISCO-CBP-BASE-CFG-MIB, CISCO-CBP-BASE-MON-MIB, and any MIB modules exten… |
1.3.6.1.4.1.9.9.663 | ciscoSwitchHardwareCapacityMIB | 3 | 141 | This MIB module defines the managed objects for hardware capacity of Cisco switching devices. The hardware capacity information c… |
1.3.6.1.4.1.9.9.664 | ciscoMmodalContactAppsMIB | 3 | 359 | The Cisco Unified Multi-Modal Contact Applications (MMCA) platform is a highly scalable, modular, extensible, open and secure pl… |
1.3.6.1.4.1.9.9.667 | ciscoServiceControllerMIB | 2 | 31 | This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a ne… |
1.3.6.1.4.1.9.9.668 | ciscoP2PIfMIB | 3 | 16 | The Point to Point Interface MIB module. This MIB manages the generic objects for Serial link or SONET/SDH like point to point ne… |
1.3.6.1.4.1.9.9.669 | ciscoCdmaPdsnExtMIB | 3 | 178 | This MIB is an extension to the CISCO-CDMA-PDSN-MIB. A CDMA network supports wireless data communication through 3G CDMA radio acc… |
1.3.6.1.4.1.9.9.670 | ciscoReportIntervalTcMIB | 0 | 0 | CISCO-REPORT-INTERVAL-TC-MIB |
1.3.6.1.4.1.9.9.672 | ciscoMobilityTapMIB | 3 | 24 | This module manages Cisco's intercept feature for Mobility Gateway Products. This MIB is used along with CISCO-TAP2-MIB MIB to int… |
1.3.6.1.4.1.9.9.673 | ciscoFCoEMIB | 2 | 45 | This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines the Virtu… |
1.3.6.1.4.1.9.9.679 | ciscoIeee8021CfmExtMIB | 3 | 55 | A MIB module for extending the IEEE8021-CFM-MIB and IEEE8021-CFM-V2-MIB to add objects which provide additional information about… |
1.3.6.1.4.1.9.9.680 | ciscoNhrpExtMIB | 3 | 36 | This MIB module is an extension of the NHRP MIB module as defined in RFC 2677. It defines notifications associated with critical … |
1.3.6.1.4.1.9.9.683 | ciscoEnergywiseMIB | 3 | 162 | The MIB is used to manage and optimize power usage in networks. Cisco EnergyWise is a specification of data, discovery and protoco… |
1.3.6.1.4.1.9.9.686 | ciscoLwappInterfaceMIB | 3 | 27 | ciscoLwappInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200901090000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Syste… |
1.3.6.1.4.1.9.9.688 | ciscoFlowMonitorTcMIB | 0 | 0 | This MIB module defines textual conventions used by the MIB modules defining objects describing flow monitoring. GLOSSARY ========… |
1.3.6.1.4.1.9.9.689 | ciscoSlbDfpMIB | 3 | 22 | This MIB reports the congestion status of the real server. A server can be in congested state due to high memory consumption, hig… |
1.3.6.1.4.1.9.9.690 | ciscoMobilePolicyChargingControlMIB | 3 | 143 | Mobile PCC Infrastructure built on top of Policy Shim Layer, is a common interface to send and receive PCC related messages for a… |
1.3.6.1.4.1.9.9.691 | ciscoEthernetFabricExtenderMIB | 3 | 23 | The MIB module for configuring one or more fabric extenders to connect into a core switch. Since fabric extenders might not be m… |
1.3.6.1.4.1.9.9.692 | ciscoFlowMonitorMIB | 4 | 195 | This MIB module defines objects that describe flow monitoring. A typical application of this MIB module will facilitate monitorin… |
1.3.6.1.4.1.9.9.693 | ciscoServiceControlAttackMIB | 3 | 55 | This MIB provides data related to different types of attacks detected by a service control entity. A service control entity is a … |
1.3.6.1.4.1.9.9.694 | ciscoCtsTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Trusted Security framework. |
1.3.6.1.4.1.9.9.695 | ciscoGtcapMIB | 3 | 194 | The MIB for Transaction Capabilities(TCAP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer P… |
1.3.6.1.4.1.9.9.696 | ciscoBootHwDiagsMIB | 3 | 22 | This MIB is used to configure those devices that support boot-time hardware diagnostics. It provides the reports about the respe… |
1.3.6.1.4.1.9.9.697 | ciscoIpCbrMetricsMIB | 4 | 42 | This MIB module defines objects that describe the a set of metrics used to measure the quality of a IP CBR traffic flow. An IP CB… |
1.3.6.1.4.1.9.9.698 | ciscoObmiMIB | 3 | 60 | The On-Board Management Interface (OBMI) provides an out-of-band communications channel (in Cisco terms: a console port), that is… |
... |