This MIB module defines managed objects that facilitate the
management of Quantum Flow Processors (QFP), which are listed
in the ENTITY-MIB (RFC 4133) entPhysicalTable as an
entPhysicalClass of 'cpu'.
The Quantum Flow Processors (QFP) technology is an architecture
family developed by Cisco, which has fully integrated and
programmable networking chip set that controls different
functions of a system such as packet forwarding.
This module contains objects to monitor various QFP
statistics such as system, utilization, memory, etc.
The utilization statistics can be used for future capacity
planning. The calculation of this statistics may vary by
devices which host QFPs, hence the user must refer to the
specific device document of interest for the exact method
of calculation. The utilization statistics have the following
terminology.
o Input - Communication channel where packets arrive on the
QFP.
o Output - Communication channel where packets leave the QFP.
o Priority - A classification applied to packets indicating
they should be treated with greater urgency.
o Non-Priority - A classification applied to packets indicating
they should be treated with lesser urgency.
o Processing Load - The percentage of time over some interval
that the QFP has spent forwarding packets,
relative to the total time spent both
forwarding packets and being idle.
Parsed from file CISCO-ENTITY-QFP-MIB.mib
Module: CISCO-ENTITY-QFP-MIB
This MIB module defines managed objects that facilitate the
management of Quantum Flow Processors (QFP), which are listed
in the ENTITY-MIB (RFC 4133) entPhysicalTable as an
entPhysicalClass of 'cpu'.
The Quantum Flow Processors (QFP) technology is an architecture
family developed by Cisco, which has fully integrated and
programmable networking chip set that controls different
functions of a system such as packet forwarding.
This module contains objects to monitor various QFP
statistics such as system, utilization, memory, etc.
The utilization statistics can be used for future capacity
planning. The calculation of this statistics may vary by
devices which host QFPs, hence the user must refer to the
specific device document of interest for the exact method
of calculation. The utilization statistics have the following
terminology.
o Input - Communication channel where packets arrive on the
QFP.
o Output - Communication channel where packets leave the QFP.
o Priority - A classification applied to packets indicating
they should be treated with greater urgency.
o Non-Priority - A classification applied to packets indicating
they should be treated with lesser urgency.
o Processing Load - The percentage of time over some interval
that the QFP has spent forwarding packets,
relative to the total time spent both
forwarding packets and being idle.
Parsed from file CISCO-ENTITY-QFP-MIB.my.txt
Company: None
Module: CISCO-ENTITY-QFP-MIB
This MIB module defines managed objects that facilitate the
management of Quantum Flow Processors (QFP), which are listed
in the ENTITY-MIB (RFC 4133) entPhysicalTable as an
entPhysicalClass of 'cpu'.
The Quantum Flow Processors (QFP) technology is an architecture
family developed by Cisco, which has fully integrated and
programmable networking chip set that controls different
functions of a system such as packet forwarding.
This module contains objects to monitor various QFP
statistics such as system, utilization, memory, etc.
The utilization statistics can be used for future capacity
planning. The calculation of this statistics may vary by
devices which host QFPs, hence the user must refer to the
specific device document of interest for the exact method
of calculation. The utilization statistics have the following
terminology.
o Input - Communication channel where packets arrive on the
QFP.
o Output - Communication channel where packets leave the QFP.
o Priority - A classification applied to packets indicating
they should be treated with greater urgency.
o Non-Priority - A classification applied to packets indicating
they should be treated with lesser urgency.
o Processing Load - The percentage of time over some interval
that the QFP has spent forwarding packets,
relative to the total time spent both
forwarding packets and being idle.
ciscoEntityQfpMIB MODULE-IDENTITY LAST-UPDATED "200912020000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable as an entPhysicalClass of 'cpu'. The Quantum Flow Processors (QFP) technology is an architecture family developed by Cisco, which has fully integrated and programmable networking chip set that controls different functions of a system such as packet forwarding. This module contains objects to monitor various QFP statistics such as system, utilization, memory, etc. The utilization statistics can be used for future capacity planning. The calculation of this statistics may vary by devices which host QFPs, hence the user must refer to the specific device document of interest for the exact method of calculation. The utilization statistics have the following terminology. o Input - Communication channel where packets arrive on the QFP. o Output - Communication channel where packets leave the QFP. o Priority - A classification applied to packets indicating they should be treated with greater urgency. o Non-Priority - A classification applied to packets indicating they should be treated with lesser urgency. o Processing Load - The percentage of time over some interval that the QFP has spent forwarding packets, relative to the total time spent both forwarding packets and being idle." REVISION "200912020000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 715 }
ciscoEntityQfpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 715 }
Vendor: Cisco
Module: CISCO-ENTITY-QFP-MIB
[Automatically extracted from oidview.com]
ciscoEntityQfpMIB MODULE-IDENTITY LAST-UPDATED "200912020000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable as an entPhysicalClass of 'cpu'. The Quantum Flow Processors (QFP) technology is an architecture family developed by Cisco, which has fully integrated and programmable networking chip set that controls different functions of a system such as packet forwarding. This module contains objects to monitor various QFP statistics such as system, utilization, memory, etc. The utilization statistics can be used for future capacity planning. The calculation of this statistics may vary by devices which host QFPs, hence the user must refer to the specific device document of interest for the exact method of calculation. The utilization statistics have the following terminology. o Input - Communication channel where packets arrive on the QFP. o Output - Communication channel where packets leave the QFP. o Priority - A classification applied to packets indicating they should be treated with greater urgency. o Non-Priority - A classification applied to packets indicating they should be treated with lesser urgency. o Processing Load - The percentage of time over some interval that the QFP has spent forwarding packets, relative to the total time spent both forwarding packets and being idle." REVISION "200912020000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 715 }
ciscoEntityQfpMIB MODULE-IDENTITY LAST-UPDATED "201406180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable as an entPhysicalClass of 'cpu'. The Quantum Flow Processors (QFP) technology is an architecture family developed by Cisco, which has fully integrated and programmable networking chip set that controls different functions of a system such as packet forwarding. This module contains objects to monitor various QFP statistics such as system, utilization, memory, etc. The utilization statistics can be used for future capacity planning. The calculation of this statistics may vary by devices which host QFPs, hence the user must refer to the specific device document of interest for the exact method of calculation. The utilization statistics have the following terminology. o Input - Communication channel where packets arrive on the QFP. o Output - Communication channel where packets leave the QFP. o Priority - A classification applied to packets indicating they should be treated with greater urgency. o Non-Priority - A classification applied to packets indicating they should be treated with lesser urgency. o Processing Load - The percentage of time over some interval that the QFP has spent forwarding packets, relative to the total time spent both forwarding packets and being idle." REVISION "201406180000Z" DESCRIPTION "Added the following objects to the MIB. ceqfpThroughputLicensedBW, ceqfpThroughputLevel, ceqfpThroughputInterval, ceqfpThroughputThreshold, ceqfpThroughputAvgRate to ceqfpThroughputTable. Added ceqfpThroughputNotifEnabled to ciscoEntityQfpNotif group. Added ceqfpThroughputNotif as a new notification to the MIB. Added a new MIB conform group, ceqfpThroughputGroup for the new objects. Also modified the ciscoEntityQfpMIBComplianceRev2 to add the new group ceqfpThroughputGroup." REVISION "201206060000Z" DESCRIPTION "Added the following new objects to the ceqfpMemoryResourceTable. ceqfpMemoryResTotalOvrflw, ceqfpMemoryHCResTotal, ceqfpMemoryResInUseOvrflw, ceqfpMemoryHCResInUse, ceqfpMemoryResFreeOvrflw,ceqfpMemoryHCResFree, ceqfpMemoryResLowFreeWatermarkOvrflw, ceqfpMemoryHCResLowFreeWatermark. Added following new compliance groups. ciscoEntityQfpMemoryResourceOvrflwGroup, ciscoEntityQfpMemoryHCResourceGroup. Added new compliance ciscoEntityQfpMIBComplianceRev2 which deprecates ciscoEntityQfpMIBComplianceRev1." REVISION "200912020000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 715 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.715.0 | ciscoEntityQfpMIBNotifs | 3 | 3 | None |
| 1.3.6.1.4.1.9.9.715.1 | ciscoEntityQfpMIBObjects | 2 | 63 | None |
| 1.3.6.1.4.1.9.9.715.2 | ciscoEntityQfpMIBConform | 2 | 13 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.667 | ciscoServiceControllerMIB | 2 | 31 | This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a ne… |
| 1.3.6.1.4.1.9.9.668 | ciscoP2PIfMIB | 3 | 16 | The Point to Point Interface MIB module. This MIB manages the generic objects for Serial link or SONET/SDH like point to point ne… |
| 1.3.6.1.4.1.9.9.669 | ciscoCdmaPdsnExtMIB | 3 | 178 | This MIB is an extension to the CISCO-CDMA-PDSN-MIB. A CDMA network supports wireless data communication through 3G CDMA radio acc… |
| 1.3.6.1.4.1.9.9.670 | ciscoReportIntervalTcMIB | 0 | 0 | CISCO-REPORT-INTERVAL-TC-MIB |
| 1.3.6.1.4.1.9.9.672 | ciscoMobilityTapMIB | 3 | 24 | This module manages Cisco's intercept feature for Mobility Gateway Products. This MIB is used along with CISCO-TAP2-MIB MIB to int… |
| 1.3.6.1.4.1.9.9.673 | ciscoFCoEMIB | 2 | 45 | This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines the Virtu… |
| 1.3.6.1.4.1.9.9.679 | ciscoIeee8021CfmExtMIB | 3 | 55 | A MIB module for extending the IEEE8021-CFM-MIB and IEEE8021-CFM-V2-MIB to add objects which provide additional information about… |
| 1.3.6.1.4.1.9.9.680 | ciscoNhrpExtMIB | 3 | 36 | This MIB module is an extension of the NHRP MIB module as defined in RFC 2677. It defines notifications associated with critical … |
| 1.3.6.1.4.1.9.9.683 | ciscoEnergywiseMIB | 3 | 162 | The MIB is used to manage and optimize power usage in networks. Cisco EnergyWise is a specification of data, discovery and protoco… |
| 1.3.6.1.4.1.9.9.686 | ciscoLwappInterfaceMIB | 3 | 27 | ciscoLwappInterfaceMIB MODULE-IDENTITY LAST-UPDATED "200901090000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Syste… |
| 1.3.6.1.4.1.9.9.688 | ciscoFlowMonitorTcMIB | 0 | 0 | This MIB module defines textual conventions used by the MIB modules defining objects describing flow monitoring. GLOSSARY ========… |
| 1.3.6.1.4.1.9.9.689 | ciscoSlbDfpMIB | 3 | 22 | This MIB reports the congestion status of the real server. A server can be in congested state due to high memory consumption, hig… |
| 1.3.6.1.4.1.9.9.690 | ciscoMobilePolicyChargingControlMIB | 3 | 143 | Mobile PCC Infrastructure built on top of Policy Shim Layer, is a common interface to send and receive PCC related messages for a… |
| 1.3.6.1.4.1.9.9.691 | ciscoEthernetFabricExtenderMIB | 3 | 23 | The MIB module for configuring one or more fabric extenders to connect into a core switch. Since fabric extenders might not be m… |
| 1.3.6.1.4.1.9.9.692 | ciscoFlowMonitorMIB | 4 | 195 | This MIB module defines objects that describe flow monitoring. A typical application of this MIB module will facilitate monitorin… |
| 1.3.6.1.4.1.9.9.693 | ciscoServiceControlAttackMIB | 3 | 55 | This MIB provides data related to different types of attacks detected by a service control entity. A service control entity is a … |
| 1.3.6.1.4.1.9.9.694 | ciscoCtsTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Trusted Security framework. |
| 1.3.6.1.4.1.9.9.695 | ciscoGtcapMIB | 3 | 194 | The MIB for Transaction Capabilities(TCAP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer P… |
| 1.3.6.1.4.1.9.9.696 | ciscoBootHwDiagsMIB | 3 | 22 | This MIB is used to configure those devices that support boot-time hardware diagnostics. It provides the reports about the respe… |
| 1.3.6.1.4.1.9.9.697 | ciscoIpCbrMetricsMIB | 4 | 42 | This MIB module defines objects that describe the a set of metrics used to measure the quality of a IP CBR traffic flow. An IP CB… |
| 1.3.6.1.4.1.9.9.698 | ciscoObmiMIB | 3 | 60 | The On-Board Management Interface (OBMI) provides an out-of-band communications channel (in Cisco terms: a console port), that is… |
| 1.3.6.1.4.1.9.9.699 | ciscoMdiMetricsMIB | 4 | 46 | This MIB module defines objects that describe the Media Delivery Index (MDI). The MDI [RFC4445] measurement describes the qualit… |
| 1.3.6.1.4.1.9.9.700 | ciscoCableL2vpnMIB | 3 | 28 | This MIB module defines managed objects that facilitate the management of Cisco devices complying to the DOCSIS L2VPN Feature for… |
| 1.3.6.1.4.1.9.9.701 | ciscoSeuMitigationMIB | 3 | 51 | This MIB reports the status of non-automatic and automatic, rate-adaptive Single Event Upset (SEU) mitigation algorithms and adju… |
| 1.3.6.1.4.1.9.9.702 | ciscoSanBaseSvcMIB | 3 | 57 | Common MIB module to manage services in Storage Area Network (SAN). Service is deployed on service nodes on multiple switches fo… |
| 1.3.6.1.4.1.9.9.703 | ciscoRtpMetricsMIB | 4 | 61 | This MIB module defines objects that describe the quality metrics of RTP streams, similar to those described by an RTCP Receiver … |
| 1.3.6.1.4.1.9.9.706 | ciscoInterfaceXcvrMonitorMIB | 3 | 33 | A MIB module that provides monitoring information about the transceivers plugged into interface on a system. |
| 1.3.6.1.4.1.9.9.708 | ciscoContentDeliveryStreamingMIB | 2 | 30 | This MIB instrumentation is for managing the Content Delivery and Streaming functionality on Cisco devices. Contents are ingested… |
| 1.3.6.1.4.1.9.9.709 | ciscoVlanGroupMIB | 3 | 18 | MIB module for monitoring and configuring VLAN Group Mapping information. |
| 1.3.6.1.4.1.9.9.710 | ciscoVirtualNicMIB | 3 | 36 | This MIB module defines MIB objects which provide mechanisms to manage the parameters used by or related to Virtual NIC. Virtual s… |
| 1.3.6.1.4.1.9.9.711 | ciscoVrfMIB | 3 | 48 | The MIB module for provisioning and managing network virtualization features. This module provides manageability for VRF, VRF-Lit… |
| 1.3.6.1.4.1.9.9.712 | ciscoWirelessNotificationMIB | 3 | 30 | This MIB is intended to be implemented on those Network Management applications that manage a network of wireless devices through… |
| 1.3.6.1.4.1.9.9.713 | ciscoTrustSecPolicyMIB | 3 | 204 | This MIB module defines managed objects that facilitate the management of various policies within the Cisco Trusted Security (Tru… |
| 1.3.6.1.4.1.9.9.714 | ciscoHwModuleControlMIB | 3 | 27 | The MIB module providing configuration and control information for management of hardware modules and components on Cisco devices… |
| 1.3.6.1.4.1.9.9.716 | ciscoVoIpTapMIB | 3 | 18 | This module manages Cisco's intercept feature for Voice over IP (VoIP). This MIB is used along with CISCO-TAP2-MIB to intercept V… |
| 1.3.6.1.4.1.9.9.718 | ciscoCuicappsMIB | 3 | 130 | The Cisco Unified Intelligence Center (CUIC) is a scalable robust and secure reporting solution for contact center applications. T… |
| 1.3.6.1.4.1.9.9.719 | ciscoUnifiedComputingMIB | 5 | 13463 | This MIB module defines the managed objects for Unified Computing System (UCS) Manager. Cisco UCS Manager provides centralized m… |
| 1.3.6.1.4.1.9.9.720 | ciscoTrustSecSxpMIB | 3 | 140 | This MIB module is for the configuration and status query of SGT Exchange Protocol over TCP (SXPoTCP) feature of the device on th… |
| 1.3.6.1.4.1.9.9.721 | ciscoMldSnoopingMIB | 3 | 215 | This MIB module defines objects that describe IGMP/MLD snooping. It provides remote network management system the ability to manag… |
| 1.3.6.1.4.1.9.9.724 | cggsnGeoMIB | 2 | 12 | This MIB provide additional information for passive interface configured for each OSPF process, independent of object creation in… |
| 1.3.6.1.4.1.9.9.725 | ciscoSmartInstallMIB | 3 | 101 | This MIB module defines managed objects that facilitate the management of Smart Install feature. Smart Install is a plug-and-pla… |
| 1.3.6.1.4.1.9.9.729 | ciscoCdstvServicesMIB | 3 | 21 | This MIB module defines service monitoring objects that faciliate the management of the Cisco Content Delivery System for TV (CDS… |
| 1.3.6.1.4.1.9.9.730 | ciscoTrustSecMIB | 3 | 128 | This MIB module is for the configuration of a network device on the Cisco Trusted Security (TrustSec) system. TrustSec secures a … |
| 1.3.6.1.4.1.9.9.731 | ciscoEpcGatewayMIB | 3 | 130 | This MIB module manages the features and configuration for PDN Gateway(PGW) and Serving Gateway(SGW) in Evolved Packet Core(EPC) … |
| 1.3.6.1.4.1.9.9.732 | ciscoDeviceLocationMIB | 3 | 49 | This MIB is used for managing location information of end point devices(Telepresence, IP Camera, Digital media player etc) connec… |
| 1.3.6.1.4.1.9.9.733 | ciscoMeetingPlaceMIB | 3 | 70 | This MIB allows management of Cisco Unified MeetingPlace (CUMP) features, CUMP is the key conferencing solution component for Cis… |
| 1.3.6.1.4.1.9.9.734 | ciscoGtpv2MIB | 2 | 160 | This MIB module manages the GPRS Tunneling Protocol version 2(GTPv2) statistics for the Evolved Packet Core(EPC) architecture. SGW… |
| 1.3.6.1.4.1.9.9.735 | ciscoCdstvFsiMIB | 3 | 25 | This MIB module defines FSI configurartion objects that faciliate the management of the Cisco Content Delivery System for TV (CDS… |
| 1.3.6.1.4.1.9.9.736 | ciscoRadiusExtMIB | 2 | 51 | This MIB module defines objects describing RADIUS (Remote Access Dialin User Service), serving as an extension of the following M… |
| 1.3.6.1.4.1.9.9.737 | ciscoSwitchNetflowMIB | 3 | 40 | This MIB module defines management objects for the Netflow features on Cisco Layer 2 and Layer 3 devices. |
| 1.3.6.1.4.1.9.9.738 | cmplsTeStdExtMIB | 3 | 72 | This MIB module contains Cisco specific managed object definitions for MPLS Traffic Engineering (TE), not contained in MPLS-TE-ST… |
| 1.3.6.1.4.1.9.9.739 | ciscoCdstvIngestmgrMIB | 3 | 69 | This MIB module defines ingest manager configuration objects that faciliate the management of the Cisco Content Delivery System f… |
| 1.3.6.1.4.1.9.9.740 | ciscoTrustSecIfMIB | 3 | 143 | This MIB module defines management objects for configuration and monitoring of the interfaces in Cisco Trusted Security environme… |
| 1.3.6.1.4.1.9.9.741 | ciscoTrustSecServerMIB | 3 | 85 | This MIB module defines management objects for configuration and monitoring of the AAA servers in Cisco Trusted Security environm… |
| 1.3.6.1.4.1.9.9.742 | ciscoIpAddressPoolTcMIB | 0 | 0 | This MIB module defines textual conventions used by MIB modules defining objects describing IP address pools. |
| 1.3.6.1.4.1.9.9.743 | ciscoCdstvCsStatsMIB | 3 | 83 | This MIB module defines objects describing the caching and streaming statistics objects that facilitate the management of the Cis… |
| 1.3.6.1.4.1.9.9.744 | ciscoIpslaVideoMIB | 3 | 73 | IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, net… |
| 1.3.6.1.4.1.9.9.745 | ciscoEntitySensorExtMIB | 3 | 21 | This MIB is extension to ENTITY-SENSOR-MIB(RFC 3433). This MIB also defines the notifications applicable for sensors reported in … |
| 1.3.6.1.4.1.9.9.748 | ciscoIpAddressPoolMIB | 3 | 96 | This MIB modules defines objects that describe common aspects of IP address pools. IP Address Pool Manager =======================… |
| 1.3.6.1.4.1.9.9.749 | ciscoCdstvBwmgrMIB | 3 | 21 | This MIB module defines Bandwidth Manager configuration objects that facilitate the management of the Cisco Content Delivery Syst… |
| 1.3.6.1.4.1.9.9.750 | ciscoCdstvIngestTuningMIB | 3 | 18 | This MIB module defines ingest tuning configuration objects that facilitate the management of the Cisco Content Delivery System f… |
| 1.3.6.1.4.1.9.9.751 | ciscoCdstvAuthmgrMIB | 3 | 25 | This MIB module defines objects that describe the configuration of the authentication manager for the Cisco Content Delivery Syst… |
| 1.3.6.1.4.1.9.9.753 | ciscoVideoSessionMIB | 3 | 145 | This MIB module complements the CISCO-VOICE-DIAL-CONTROL-MIB, which provides voice telephony peer information, by providing manag… |
| 1.3.6.1.4.1.9.9.754 | ciscoCdstvServerMIB | 3 | 82 | This MIB module defines server configuration that faciliate the management of the Cisco Content Delivery System for TV (CDS-TV) … |
| 1.3.6.1.4.1.9.9.755 | ciscoCdstvIsaMIB | 3 | 145 | This MIB module defines ISA configuration objects that faciliate the management of the Cisco Content Delivery System for TV (CDS-… |
| 1.3.6.1.4.1.9.9.756 | ciscoEntityPerformanceMIB | 3 | 56 | This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the EN… |
| 1.3.6.1.4.1.9.9.757 | ciscoSbcStatsMIB | 3 | 106 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. This MIB categori… |
| 1.3.6.1.4.1.9.9.758 | ciscoTelepresenceExchangeSystemMIB | 3 | 173 | The main purpose of this MIB is to provide product component level configuration, status, statistics, events, and alarm notificat… |
| 1.3.6.1.4.1.9.9.759 | ciscoGdoiMIB | 3 | 213 | This MIB module defines objects for managing the GDOI protocol. Copyright (c) The IETF Trust (2010). This version of this MIB mo… |
| 1.3.6.1.4.1.9.9.760 | ciscoPtpMIB | 3 | 182 | The MIB module for PTPv2 (IEEE1588 - 2008) Overview of PTPv2 (IEEE 1588-2008) This IEEE standard defines a protocol enabling prec… |
| 1.3.6.1.4.1.9.9.761 | ciscoNetsyncMIB | 3 | 104 | The Synchronous Ethernet (SyncE) MIB is defined for monitoring network synchronization based on ITU-T G.781 clock selection. Sync… |
| 1.3.6.1.4.1.9.9.762 | ciscoWanOptimizationMIB | 3 | 302 | This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as m… |
| 1.3.6.1.4.1.9.9.763 | ciscoVideoTc | 0 | 0 | This MIB module defines a collection of common video-related textual conventions to be used in Cisco MIBS for video-capable produ… |
| 1.3.6.1.4.1.9.9.764 | ciscoUbeMIB | 2 | 12 | This MIB describes objects used for managing Cisco Unified Border Element (CUBE). The Cisco Unified Border Element (CUBE) is a Ci… |
| 1.3.6.1.4.1.9.9.765 | ciscoFlowCloneMIB | 3 | 44 | This MIB module defines objects that manages flow cloning feature. A flow cloning can be described as a hardware or software enti… |
| ... | ||||