The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
Parsed from file TUNNEL-MIB.mib
Module: TUNNEL-MIB
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
tunnelIfEncapsLimit OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size)."
REFERENCE "RFC 2473, section 4.1.1"
View at oid-info.com
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
Parsed from file TUNNEL-MIB.txt
Company: None
Module: TUNNEL-MIB
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
tunnelIfEncapsLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size)." REFERENCE "RFC 2473, section 4.1.1" ::= { tunnelIfEntry 11 }
tunnelIfEncapsLimit OBJECT-TYPE SYNTAX INTEGER(-1|0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size)." REFERENCE "RFC 2473, section 4.1.1" ::= { tunnelIfEntry 11 }
Automatically extracted from RFC4087
tunnelIfEncapsLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size)." REFERENCE "RFC 2473, section 4.1.1" ::= { tunnelIfEntry 11 }
tunnelIfEncapsLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size)." REFERENCE "RFC 2473, section 4.1.1" ::= { tunnelIfEntry 11 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.131.1.1.1.1.1 | tunnelIfLocalAddress | 0 | 0 | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.2.1.10.131.1.1.1.1.2 | tunnelIfRemoteAddress | 0 | 0 | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unkno… |
| 1.3.6.1.2.1.10.131.1.1.1.1.3 | tunnelIfEncapsMethod | 0 | 0 | The encapsulation method used by the tunnel. |
| 1.3.6.1.2.1.10.131.1.1.1.1.4 | tunnelIfHopLimit | 0 | 0 | The TTL to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. |
| 1.3.6.1.2.1.10.131.1.1.1.1.5 | tunnelIfSecurity | 0 | 0 | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel end… |
| 1.3.6.1.2.1.10.131.1.1.1.1.6 | tunnelIfTOS, tunnelIfPriority | 0 | 0 | The method used to set the high 6 bits of the TOS in the outer IP header. A value of -1 indicates that the bits are copied from … |
| 1.3.6.1.2.1.10.131.1.1.1.1.7 | tunnelIfFlowLabel | 0 | 0 | The method used to set the IPv6 Flow Label value. This object need not be present in rows where tunnelIfAddressType indicates the… |
| 1.3.6.1.2.1.10.131.1.1.1.1.8 | tunnelIfAddressType | 0 | 0 | The type of address in the corresponding tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress objects. |
| 1.3.6.1.2.1.10.131.1.1.1.1.9 | tunnelIfLocalInetAddress | 0 | 0 | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknow… |
| 1.3.6.1.2.1.10.131.1.1.1.1.10 | tunnelIfRemoteInetAddress | 0 | 0 | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is … |