The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by tunnelIfAddressType.
Parsed from file TUNNEL-MIB.mib
Module: TUNNEL-MIB
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by tunnelIfAddressType.
tunnelIfLocalInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by tunnelIfAddressType."
View at oid-info.com
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by tunnelIfAddressType.
Parsed from file TUNNEL-MIB.txt
Company: None
Module: TUNNEL-MIB
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by tunnelIfAddressType.
tunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType." ::= { tunnelIfEntry 9 }
tunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress ACCESS read-write STATUS mandatory DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType." ::= { tunnelIfEntry 9 }
Automatically extracted from RFC4087
tunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType." ::= { tunnelIfEntry 9 }
tunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType." ::= { tunnelIfEntry 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.131.1.1.1.1.1 | tunnelIfLocalAddress | 0 | 0 | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.2.1.10.131.1.1.1.1.2 | tunnelIfRemoteAddress | 0 | 0 | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unkno… |
| 1.3.6.1.2.1.10.131.1.1.1.1.3 | tunnelIfEncapsMethod | 0 | 0 | The encapsulation method used by the tunnel. |
| 1.3.6.1.2.1.10.131.1.1.1.1.4 | tunnelIfHopLimit | 0 | 0 | The TTL to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. |
| 1.3.6.1.2.1.10.131.1.1.1.1.5 | tunnelIfSecurity | 0 | 0 | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel end… |
| 1.3.6.1.2.1.10.131.1.1.1.1.6 | tunnelIfTOS, tunnelIfPriority | 0 | 0 | The method used to set the high 6 bits of the TOS in the outer IP header. A value of -1 indicates that the bits are copied from … |
| 1.3.6.1.2.1.10.131.1.1.1.1.7 | tunnelIfFlowLabel | 0 | 0 | The method used to set the IPv6 Flow Label value. This object need not be present in rows where tunnelIfAddressType indicates the… |
| 1.3.6.1.2.1.10.131.1.1.1.1.8 | tunnelIfAddressType | 0 | 0 | The type of address in the corresponding tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress objects. |
| 1.3.6.1.2.1.10.131.1.1.1.1.10 | tunnelIfRemoteInetAddress | 0 | 0 | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is … |
| 1.3.6.1.2.1.10.131.1.1.1.1.11 | tunnelIfEncapsLimit | 0 | 0 | The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indic… |