The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header), or 0.0.0.0 if unknown, or an IPv6 address, or
the tunnel is not a point-to-point link (e.g., if it
is a 6to4 tunnel).
Since this object does not support IPv6, it is
deprecated in favor of tunnelIfRemoteInetAddress.
Parsed from file TUNNEL-MIB.mib
Module: TUNNEL-MIB
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header), or 0.0.0.0 if unknown, or an IPv6 address, or
the tunnel is not a point-to-point link (e.g., if it
is a 6to4 tunnel).
Since this object does not support IPv6, it is
deprecated in favor of tunnelIfRemoteInetAddress.
tunnelIfRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel (i.e., the
destination address used in the outer IP header), or 0.0.0.0
if unknown."
View at oid-info.com
The address of the remote endpoint of the tunnel (i.e., the
destination address used in the outer IP header), or 0.0.0.0
if unknown.
Parsed from file TUNNEL-MIB.txt
Company: None
Module: TUNNEL-MIB
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header), or 0.0.0.0 if unknown, or an IPv6 address, or
the tunnel is not a point-to-point link (e.g., if it
is a 6to4 tunnel).
Since this object does not support IPv6, it is
deprecated in favor of tunnelIfRemoteInetAddress.
tunnelIfRemoteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown, or an IPv6 address, or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel). Since this object does not support IPv6, it is deprecated in favor of tunnelIfRemoteInetAddress." ::= { tunnelIfEntry 2 }
tunnelIfRemoteAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS deprecated DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown, or an IPv6 address, or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel). Since this object does not support IPv6, it is deprecated in favor of tunnelIfRemoteInetAddress." ::= { tunnelIfEntry 2 }
Automatically extracted from RFC2667
tunnelIfRemoteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown." ::= { tunnelIfEntry 2 }
tunnelIfRemoteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown, or an IPv6 address, or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel). Since this object does not support IPv6, it is deprecated in favor of tunnelIfRemoteInetAddress." ::= { tunnelIfEntry 2 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.131.1.1.1.1.1 | tunnelIfLocalAddress | 0 | 0 | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. |
1.3.6.1.2.1.10.131.1.1.1.1.3 | tunnelIfEncapsMethod | 0 | 0 | The encapsulation method used by the tunnel. |
1.3.6.1.2.1.10.131.1.1.1.1.4 | tunnelIfHopLimit | 0 | 0 | The TTL to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. |
1.3.6.1.2.1.10.131.1.1.1.1.5 | tunnelIfSecurity | 0 | 0 | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel end… |
1.3.6.1.2.1.10.131.1.1.1.1.6 | tunnelIfTOS, tunnelIfPriority | 0 | 0 | The method used to set the high 6 bits of the TOS in the outer IP header. A value of -1 indicates that the bits are copied from … |
1.3.6.1.2.1.10.131.1.1.1.1.7 | tunnelIfFlowLabel | 0 | 0 | The method used to set the IPv6 Flow Label value. This object need not be present in rows where tunnelIfAddressType indicates the… |
1.3.6.1.2.1.10.131.1.1.1.1.8 | tunnelIfAddressType | 0 | 0 | The type of address in the corresponding tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress objects. |
1.3.6.1.2.1.10.131.1.1.1.1.9 | tunnelIfLocalInetAddress | 0 | 0 | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknow… |
1.3.6.1.2.1.10.131.1.1.1.1.10 | tunnelIfRemoteInetAddress | 0 | 0 | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is … |
1.3.6.1.2.1.10.131.1.1.1.1.11 | tunnelIfEncapsLimit | 0 | 0 | The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indic… |