The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
dot1dStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.10"
View at oid-info.com
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1d/D9 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1d/D9 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.
Parsed from file 18600.MIB.txt
Company: None
Module: MSH4PortEthBr-MIB
The value that all bridges use for ForwardDelay when
this bridge is acting as the root. Note that
802.1D-1998 specifies that the range for this parameter
is related to the value of dot1dStpBridgeMaxAge. The
granularity of this timer is specified by 802.1D-1998 to
be 1 second. An agent may return a badValue error if a
set is attempted to a value that is not a whole number
of seconds.
dot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { dot1dStp 14 }
dot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { dot1dStp 14 }
Automatically extracted from RFC1493
dot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX INTEGER (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "P802.1d/D9, July 14, 1989: Section 4.5.3.9" ::= { dot1dStp 14 }
dot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds." REFERENCE "IEEE 802.1D-1998: clause 8.5.3.10" ::= { dot1dStp 14 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.14.0 | dot1dStpBridgeForwardDelay | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.1 | dot1dStpProtocolSpecification | 1 | 1 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.2.1.17.2.2 | dot1dStpPriority | 1 | 1 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.2.1.17.2.3 | dot1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.2.1.17.2.4 | dot1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.2.1.17.2.5 | dot1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.2.1.17.2.6 | dot1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.2.1.17.2.7 | dot1dStpRootPort | 1 | 1 | The port number of the port that offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.2.1.17.2.8 | dot1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.2.1.17.2.9 | dot1dStpHelloTime | 1 | 1 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.2.1.17.2.10 | dot1dStpHoldTime | 1 | 1 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.2.1.17.2.11 | dot1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.2.1.17.2.12 | dot1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range f… |
| 1.3.6.1.2.1.17.2.13 | dot1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.2.1.17.2.15 | dot1dStpPortTable | 1 | 13 | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.2.1.17.2.16 | dot1dStpVersion, dot1dStpExtPortTable, dot1dStpBridgePPPForwardDelay | 2 | 7 | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree … |
| 1.3.6.1.2.1.17.2.17 | dot1dStpTxHoldCount, dot1dStpPathCostDefault | 1 | 1 | The value used by the Port Transmit state machine to limit the maximum transmission rate. The value of this object MUST be retain… |
| 1.3.6.1.2.1.17.2.18 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |
| 1.3.6.1.2.1.17.2.19 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |