The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.
dot1dStpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
View at oid-info.com
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.
Parsed from file 18600.MIB.txt
Company: None
Module: MSH4PortEthBr-MIB
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port when
it is the root of the spanning tree, or trying to become
so, in units of hundredths of a second. This is the
actual value that this bridge is currently using.
dot1dStpHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { dot1dStp 9 }
dot1dStpHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { dot1dStp 9 }
Automatically extracted from RFC1493
dot1dStpHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "P802.1d/D9, July 14, 1989: Section 4.5.3.5" ::= { dot1dStp 9 }
dot1dStpHelloTime OBJECT-TYPE SYNTAX Timeout UNITS "centi-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1998: clause 8.5.3.5" ::= { dot1dStp 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.9.0 | dot1dStpHelloTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.1 | dot1dStpProtocolSpecification | 1 | 1 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.2.1.17.2.2 | dot1dStpPriority | 1 | 1 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.2.1.17.2.3 | dot1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.2.1.17.2.4 | dot1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.2.1.17.2.5 | dot1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.2.1.17.2.6 | dot1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.2.1.17.2.7 | dot1dStpRootPort | 1 | 1 | The port number of the port that offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.2.1.17.2.8 | dot1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.2.1.17.2.10 | dot1dStpHoldTime | 1 | 1 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.2.1.17.2.11 | dot1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.2.1.17.2.12 | dot1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range f… |
| 1.3.6.1.2.1.17.2.13 | dot1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.2.1.17.2.14 | dot1dStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the r… |
| 1.3.6.1.2.1.17.2.15 | dot1dStpPortTable | 1 | 13 | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.2.1.17.2.16 | dot1dStpVersion, dot1dStpExtPortTable, dot1dStpBridgePPPForwardDelay | 2 | 7 | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree … |
| 1.3.6.1.2.1.17.2.17 | dot1dStpTxHoldCount, dot1dStpPathCostDefault | 1 | 1 | The value used by the Port Transmit state machine to limit the maximum transmission rate. The value of this object MUST be retain… |
| 1.3.6.1.2.1.17.2.18 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |
| 1.3.6.1.2.1.17.2.19 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |