dot1dStpTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
View at oid-info.com
The version of the Spanning Tree default Path Costs that
are to be used by this Bridge. A value of 8021d1998(1)
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.
Parsed from file rfc4318.mib.txt
Company: None
Module: RSTP-MIB
The value used by the Port Transmit state machine to limit
the maximum transmission rate.
The value of this object MUST be retained across
reinitializations of the management system.
Parsed from file RSTP-MIB.mib
Module: RSTP-MIB
Automatically extracted from RFC4318
dot1dStpPathCostDefault OBJECT-TYPE SYNTAX INTEGER { stp8021d1998(1), stp8021t2001(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 802.1t." REFERENCE "IEEE 802.1D & 802.1t Table 8-5" ::= { dot1dStp 17 }
dot1dStpTxHoldCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate. The value of this object MUST be retained across reinitializations of the management system." REFERENCE "IEEE 802.1w clause 17.16.6" DEFVAL { 3 } ::= { dot1dStp 17 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.17.0 | dot1dStpTxHoldCount | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.1 | dot1dStpProtocolSpecification | 1 | 1 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.2.1.17.2.2 | dot1dStpPriority | 1 | 1 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.2.1.17.2.3 | dot1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.2.1.17.2.4 | dot1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.2.1.17.2.5 | dot1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.2.1.17.2.6 | dot1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.2.1.17.2.7 | dot1dStpRootPort | 1 | 1 | The port number of the port that offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.2.1.17.2.8 | dot1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.2.1.17.2.9 | dot1dStpHelloTime | 1 | 1 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.2.1.17.2.10 | dot1dStpHoldTime | 1 | 1 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.2.1.17.2.11 | dot1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.2.1.17.2.12 | dot1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range f… |
| 1.3.6.1.2.1.17.2.13 | dot1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.2.1.17.2.14 | dot1dStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the r… |
| 1.3.6.1.2.1.17.2.15 | dot1dStpPortTable | 1 | 13 | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.2.1.17.2.16 | dot1dStpVersion, dot1dStpExtPortTable, dot1dStpBridgePPPForwardDelay | 2 | 7 | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree … |
| 1.3.6.1.2.1.17.2.18 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |
| 1.3.6.1.2.1.17.2.19 | dot1dStpExtPortTable | 1 | 7 | A table that contains port-specific Rapid Spanning Tree information. |