dot1dStpPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port, using the enumeration values of the
IEEE 802.1w clause. A value of forceTrue(0) indicates
that this port should always be treated as if it is
connected to a point-to-point link. A value of
forceFalse(1) indicates that this port should be treated as
having a shared media connection. A value of auto(2)
indicates that this port is considered to have a
point-to-point link if it is an Aggregator and all of its
members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means. Manipulating this
object changes the underlying adminPortToPortMAC.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
View at oid-info.com
The administrative point-to-point status of the LAN segment
attached to this port, using the enumeration values of the
IEEE 802.1w clause. A value of forceTrue(0) indicates
that this port should always be treated as if it is
connected to a point-to-point link. A value of
forceFalse(1) indicates that this port should be treated as
having a shared media connection. A value of auto(2)
indicates that this port is considered to have a
point-to-point link if it is an Aggregator and all of its
members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means. Manipulating this
object changes the underlying adminPortToPortMAC.
The value of this object MUST be retained across
reinitializations of the management system.
Parsed from file RSTP-MIB.mib
Module: RSTP-MIB
Automatically extracted from RFC4318
dot1dStpPortAdminPointToPoint OBJECT-TYPE SYNTAX INTEGER { forceTrue(0), forceFalse(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative point-to-point status of the LAN segment attached to this port, using the enumeration values of the IEEE 802.1w clause. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Manipulating this object changes the underlying adminPortToPortMAC. The value of this object MUST be retained across reinitializations of the management system." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" ::= { dot1dStpExtPortEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.19.1.1 | dot1dStpPortProtocolMigration | 0 | 0 | When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operat… |
| 1.3.6.1.2.1.17.2.19.1.2 | dot1dStpPortAdminEdgePort | 0 | 0 | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-po… |
| 1.3.6.1.2.1.17.2.19.1.3 | dot1dStpPortOperEdgePort | 0 | 0 | The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dS… |
| 1.3.6.1.2.1.17.2.19.1.5 | dot1dStpPortOperPointToPoint | 0 | 0 | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to hav… |
| 1.3.6.1.2.1.17.2.19.1.6 | dot1dStpPortAdminPathCost | 0 | 0 | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Wri… |