dot1dStpPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection.
If adminPointToPointMAC is set to auto(2), then the value
of operPointToPointMAC is determined in accordance with the
specific procedures defined for the MAC entity concerned,
as defined in IEEE 802.1w, clause 6.5. The value is
determined dynamically; that is, it is re-evaluated whenever
the value of adminPointToPointMAC changes, and whenever
the specific procedures defined for the MAC entity evaluate
a change in its point-to-point status."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
View at oid-info.com
The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection.
If adminPointToPointMAC is set to auto(2), then the value
of operPointToPointMAC is determined in accordance with the
specific procedures defined for the MAC entity concerned,
as defined in IEEE 802.1w, clause 6.5. The value is
determined dynamically; that is, it is re-evaluated whenever
the value of adminPointToPointMAC changes, and whenever
the specific procedures defined for the MAC entity evaluate
a change in its point-to-point status.
Parsed from file RSTP-MIB.mib
Module: RSTP-MIB
Automatically extracted from RFC4318
dot1dStpPortOperPointToPoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection. If adminPointToPointMAC is set to auto(2), then the value of operPointToPointMAC is determined in accordance with the specific procedures defined for the MAC entity concerned, as defined in IEEE 802.1w, clause 6.5. The value is determined dynamically; that is, it is re-evaluated whenever the value of adminPointToPointMAC changes, and whenever the specific procedures defined for the MAC entity evaluate a change in its point-to-point status." REFERENCE "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" ::= { dot1dStpExtPortEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.17.2.19.1.1 | dot1dStpPortProtocolMigration | 0 | 0 | When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operat… |
| 1.3.6.1.2.1.17.2.19.1.2 | dot1dStpPortAdminEdgePort | 0 | 0 | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-po… |
| 1.3.6.1.2.1.17.2.19.1.3 | dot1dStpPortOperEdgePort | 0 | 0 | The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dS… |
| 1.3.6.1.2.1.17.2.19.1.4 | dot1dStpPortAdminPointToPoint | 0 | 0 | The administrative point-to-point status of the LAN segment attached to this port, using the enumeration values of the IEEE 802.1… |
| 1.3.6.1.2.1.17.2.19.1.6 | dot1dStpPortAdminPathCost | 0 | 0 | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Wri… |