An estimate of the interface's current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this object should contain
the nominal bandwidth.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
An estimate of the interface's current bandwidth in bits
per second. For interfaces which do not vary in bandwidth
or for those where no accurate estimation can be made, this
object should contain the nominal bandwidth. If the
bandwidth of the interface is greater than the maximum value
reportable by this object then this object should report its
maximum value (4,294,967,295) and ifHighSpeed must be used
to report the interace's speed. For a sub-layer which has
no concept of bandwidth, this object should be zero.
Estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
View at oid-info.com
An estimate of the interface's current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this object should contain
the nominal bandwidth.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
An estimate of the interface's current bandwidth in bits
per second. For interfaces which do not vary in bandwidth
or for those where no accurate estimation can be made, this
object should contain the nominal bandwidth. If the
bandwidth of the interface is greater than the maximum value
reportable by this object then this object should report its
maximum value (4,294,967,295) and ifHighSpeed must be used
to report the interace's speed. For a sub-layer which has
no concept of bandwidth, this object should be zero.
ifSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifEntry 5 }
ifSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifEntry 5 }
For more information see IETF - RFC 1213 (03/1991)
ifSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifEntry 5 }
ifSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifEntry 5 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.2.2.1.1 | ifIndex | 0 | 0 | Unique value for each interface |
1.3.6.1.2.1.2.2.1.2 | ifDescr | 0 | 0 | Textual string containing information about the interface. This string should include the name of the manufacturer, the product… |
1.3.6.1.2.1.2.2.1.3 | ifType | 276 | 276 | Type of interface, distinguished according to the physical/link protocol(s) immediately 'below' the network layer in the protoc… |
1.3.6.1.2.1.2.2.1.4 | ifMtu | 0 | 0 | Size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for… |
1.3.6.1.2.1.2.2.1.6 | ifPhysAddress, ifPhyAddress | 0 | 0 | Interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do … |
1.3.6.1.2.1.2.2.1.7 | ifAdminStatus | 0 | 0 | Desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
1.3.6.1.2.1.2.2.1.8 | ifOperStatus | 0 | 0 | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
1.3.6.1.2.1.2.2.1.9 | ifLastChange | 0 | 0 | Value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to t… |
1.3.6.1.2.1.2.2.1.10 | ifInOctets | 0 | 0 | Total number of octets received on the interface, including framing characters. |
1.3.6.1.2.1.2.2.1.11 | ifInUcastPkts | 0 | 0 | Number of subnetwork-unicast packets delivered to a higher-layer protocol. |
1.3.6.1.2.1.2.2.1.12 | ifInNUcastPkts | 0 | 0 | Number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets livered to a higher-layer protocol. |
1.3.6.1.2.1.2.2.1.13 | ifInDiscards | 0 | 0 | Number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deli… |
1.3.6.1.2.1.2.2.1.14 | ifInErrors | 0 | 0 | Number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
1.3.6.1.2.1.2.2.1.15 | ifInUnknownProtos | 0 | 0 | Number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
1.3.6.1.2.1.2.2.1.16 | ifOutOctets | 0 | 0 | Total number of octets transmitted out of the interface, including framing characters. |
1.3.6.1.2.1.2.2.1.17 | ifOutUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those t… |
1.3.6.1.2.1.2.2.1.18 | ifOutNUcastPkts | 0 | 0 | Total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or … |
1.3.6.1.2.1.2.2.1.19 | ifOutDiscards | 0 | 0 | Number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being tra… |
1.3.6.1.2.1.2.2.1.20 | ifOutErrors | 0 | 0 | Number of outbound packets that could not be transmitted because of errors. |
1.3.6.1.2.1.2.2.1.21 | ifOutQLen | 0 | 0 | Length of the output packet queue (in packets). |
1.3.6.1.2.1.2.2.1.22 | ifSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interfa… |
1.3.6.1.2.1.2.2.1.27 | ifStateChangeTrapEnable | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.29 | ifClearStats | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.30 | ifClearStatsTime | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.31 | ifErrorRateTrapEnable | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.32 | ifErrorRateInterval | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.33 | ifErrorInLowThreshold | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.34 | ifErrorInHighThreshold | 0 | 0 | ifErrorInHighthreshold |
1.3.6.1.2.1.2.2.1.35 | ifErrorOutLowThreshold | 0 | 0 | None |
1.3.6.1.2.1.2.2.1.36 | ifErrorOutHighThreshold | 0 | 0 | ifErrorOutHighthreshold |
1.3.6.1.2.1.2.2.1.37 | ifErrType | 0 | 0 | None |