The configuration parameters pertaining to a syslog
application.
pwCepEntry OBJECT-TYPE
SYNTAX PwCepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the association of a SONET/SDH path or
VT to a PW. This table is indexed by the pwIndex of the
applicable PW entry in the pwTable.
An entry is created in this table by the agent for every
entry in the pwTable with a pwType equal to \cep\.
All read-write objects in this table MAY be changed at any
time; however, change of some objects (for example
pwCepCfgIndex) during PW forwarding state may cause
traffic disruption.
Manual entries in this table SHOULD be preserved after a
reboot. The agent MUST ensure the integrity of those
entries. If the set of entries of a specific row are found
to be inconsistent after reboot, the PW pwOperStatus MUST
be declared as notPresent(5)."
INDEX { pwIndex }
View at oid-info.com
The configuration parameters pertaining to a syslog
application.
syslogControlEntry OBJECT-TYPE SYNTAX SyslogControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The configuration parameters pertaining to a syslog application." INDEX { syslogControlIndex } ::= { syslogControlTable 1 }
Automatically extracted from RFC6240
syslogControlEntry OBJECT-TYPE SYNTAX SyslogControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The configuration parameters pertaining to a syslog application. " INDEX { syslogControlIndex } ::= { syslogControlTable 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.200.1.1.1.1 | pwCepType, syslogControlIndex | 0 | 0 | The Index that uniquely identifies the syslog application in the syslogControlTable. The value of the index for a syslog applicat… |
| 1.3.6.1.2.1.200.1.1.1.2 | pwCepSonetIfIndex, syslogControlDescr | 0 | 0 | A user definable description of the syslog application. This description could be used by syslog management applications e.g. in … |
| 1.3.6.1.2.1.200.1.1.1.3 | pwCepSonetConfigErrorOrStatus, syslogControlRoles | 0 | 0 | The roles of the syslog application. |
| 1.3.6.1.2.1.200.1.1.1.4 | pwCepCfgIndex, syslogControlBindAddrType | 0 | 0 | The type of Internet address which follows in syslogControlBindAddr. If this syslog application is not a syslog receiver, the valu… |
| 1.3.6.1.2.1.200.1.1.1.5 | pwCepTimeElapsed, syslogControlBindAddr | 0 | 0 | pwCepTimeElapsed OBJECT-TYPE SYNTAX HCPerftimeElapsed UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The numb… |
| 1.3.6.1.2.1.200.1.1.1.6 | pwCepValidIntervals, syslogControlBindPort | 0 | 0 | The port number that this syslog receiver will bind to. If this syslog application is not a syslog receiver the value of this obj… |
| 1.3.6.1.2.1.200.1.1.1.7 | pwCepIndications, syslogControlEncapsulation | 0 | 0 | The encapsulation that will be used for syslog messages by the syslog receiver. If this syslog application is not a syslog receiv… |
| 1.3.6.1.2.1.200.1.1.1.8 | pwCepLastEsTimeStamp, syslogControlMaxMessageSize | 0 | 0 | The maximum size of the syslog messages in bytes for this syslog application. A syslog receiver may reject or truncate messages l… |
| 1.3.6.1.2.1.200.1.1.1.9 | pwCepPeerCepOption, syslogControlConfFileName | 0 | 0 | pwCepPeerCepOption OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the CEP option p… |
| 1.3.6.1.2.1.200.1.1.1.11 | syslogControlStorageType | 0 | 0 | This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up… |
| 1.3.6.1.2.1.200.1.1.1.12 | syslogControlRowStatus | 0 | 0 | This object is used to create, modify and delete rows in the syslogControlTable. The value of syslogControlDescr can be changed wh… |