The severity value of this entry.
pwCepSonetPayloadLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of SONET bytes of the Path or VT carried as
payload within one packet. For example, for STS-1/VC-3 SPE
circuits, a value of 783 bytes indicates that each packet
carries the payload equivalent to one frame. For VT1.5/VC11
circuits, a payload length of 104 bytes indicates that each
packet carries payload equivalent to one VT1.5 super-frame.
The actual payload size may be different due to bandwidth
reduction modes, e.g., Dynamic Bandwidth Allocation (DBA)
mode or dynamically assigned fractional SPE. This length
applies to inbound and outbound packets carrying user
payload. Although there is no control over inbound packets,
those of illegal length are discarded and accounted for (see
pwCepPerf...Malformed.)
The default values are determined by the pwCepType:
783 for pwCepType equal to spe(2) or fracSpe(3).
For vt(3) modes, the applicable super-frame payload size
is the default value."
REFERENCE
"Malis, A., et al., \Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)\, RFC 4842, Sections 5.1 and 12.1"
View at oid-info.com
The severity value of this entry.
syslogPrioritySeverity OBJECT-TYPE SYNTAX SyslogSeverity ACCESS not-accessible STATUS mandatory DESCRIPTION "The severity value of this entry." ::= { syslogPriorityEntry 2 }
Automatically extracted from RFC6240
syslogPrioritySeverity OBJECT-TYPE SYNTAX SyslogSeverity MAX-ACCESS not-accessible STATUS current DESCRIPTION "The severity value of this entry. " ::= { syslogPriorityEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.200.1.3.1.1 | pwCepCfgTableIndex, syslogPriorityFacility | 0 | 0 | The facility value of this entry. |
| 1.3.6.1.2.1.200.1.3.1.3 | pwCepCfgMinPktLength, syslogPriorityDescr | 0 | 0 | A textual description of this priority entry. |
| 1.3.6.1.2.1.200.1.3.1.4 | pwCepCfgPktReorder, syslogPriorityDestinationIndex | 0 | 0 | On systems where the priority value in a syslog message indicates the destination to which a syslog message should be relayed, th… |
| 1.3.6.1.2.1.200.1.3.1.5 | pwCepCfgEnableDBA, syslogPriorityStorageType | 0 | 0 | This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up… |
| 1.3.6.1.2.1.200.1.3.1.6 | pwCepCfgRtpHdrSuppress, syslogPriorityRowStatus | 0 | 0 | pwCepCfgRtpHdrSuppress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set t… |
| 1.3.6.1.2.1.200.1.3.1.7 | pwCepCfgJtrBfrDepth | 0 | 0 | pwCepCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "micro-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This… |
| 1.3.6.1.2.1.200.1.3.1.8 | pwCepCfgConsecPktsInsync | 0 | 0 | pwCepCfgConsecPktsInsync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive packets w… |
| 1.3.6.1.2.1.200.1.3.1.9 | pwCepCfgConsecMissingOutSync | 0 | 0 | pwCepCfgConsecMissingOutSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive missi… |
| 1.3.6.1.2.1.200.1.3.1.10 | pwCepCfgPktErrorPlayOutValue | 0 | 0 | pwCepCfgPktErrorPlayOutValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This obj… |
| 1.3.6.1.2.1.200.1.3.1.11 | pwCepCfgMissingPktsToSes | 0 | 0 | pwCepCfgMissingPktsToSes OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The n… |
| 1.3.6.1.2.1.200.1.3.1.12 | pwCepCfgSesToUas | 0 | 0 | pwCepCfgSesToUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of… |
| 1.3.6.1.2.1.200.1.3.1.13 | pwCepCfgSecsToExitUas | 0 | 0 | pwCepCfgSecsToExitUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The numb… |
| 1.3.6.1.2.1.200.1.3.1.14 | pwCepCfgName | 0 | 0 | pwCepCfgName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This variable contains the n… |
| 1.3.6.1.2.1.200.1.3.1.15 | pwCepCfgRowStatus | 0 | 0 | pwCepCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and … |
| 1.3.6.1.2.1.200.1.3.1.16 | pwCepCfgStorageType | 0 | 0 | pwCepCfgStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the… |