This object defines whether the parameters defined in
this row are kept in volatile storage and lost upon
reboot or are backed up by non-volatile or permanent
storage.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
pwCepCfgEnableDBA OBJECT-TYPE
SYNTAX BITS {
ais (0),
unequipped (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines when DBA is applied for packets sent
toward the PSN.
Setting \ais\ MUST cause CEP packet payload suppression
when AIS is detected on the associated SONET path.
Similarly, \unequipped\ MUST cause payload suppression
when an unequipped condition is detected on the SONET/SDH
PATH/VT.
During DBA condition, CEP packets will continue
to be sent, but with indicators set in the CEP header
instructing the remote to play all ones (for AIS) or all
zeros (for unequipped) onto its SONET/SDH path.
NOTE: Some implementations may not support this feature.
In these cases, this object should be read-only."
REFERENCE
"Malis, A., et al., \Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)\, RFC 4842, Section 11.1."
View at oid-info.com
This object defines whether the parameters defined in
this row are kept in volatile storage and lost upon
reboot or are backed up by non-volatile or permanent
storage.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
syslogPriorityStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-write STATUS mandatory DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up by non-volatile or permanent storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { syslogPriorityEntry 5 }
Automatically extracted from RFC6240
syslogPriorityStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up by non-volatile or permanent storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " DEFVAL { nonVolatile } ::= { syslogPriorityEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.200.1.3.1.1 | pwCepCfgTableIndex, syslogPriorityFacility | 0 | 0 | The facility value of this entry. |
| 1.3.6.1.2.1.200.1.3.1.2 | pwCepSonetPayloadLength, syslogPrioritySeverity | 0 | 0 | The severity value of this entry. |
| 1.3.6.1.2.1.200.1.3.1.3 | pwCepCfgMinPktLength, syslogPriorityDescr | 0 | 0 | A textual description of this priority entry. |
| 1.3.6.1.2.1.200.1.3.1.4 | pwCepCfgPktReorder, syslogPriorityDestinationIndex | 0 | 0 | On systems where the priority value in a syslog message indicates the destination to which a syslog message should be relayed, th… |
| 1.3.6.1.2.1.200.1.3.1.6 | pwCepCfgRtpHdrSuppress, syslogPriorityRowStatus | 0 | 0 | pwCepCfgRtpHdrSuppress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set t… |
| 1.3.6.1.2.1.200.1.3.1.7 | pwCepCfgJtrBfrDepth | 0 | 0 | pwCepCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "micro-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This… |
| 1.3.6.1.2.1.200.1.3.1.8 | pwCepCfgConsecPktsInsync | 0 | 0 | pwCepCfgConsecPktsInsync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive packets w… |
| 1.3.6.1.2.1.200.1.3.1.9 | pwCepCfgConsecMissingOutSync | 0 | 0 | pwCepCfgConsecMissingOutSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive missi… |
| 1.3.6.1.2.1.200.1.3.1.10 | pwCepCfgPktErrorPlayOutValue | 0 | 0 | pwCepCfgPktErrorPlayOutValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This obj… |
| 1.3.6.1.2.1.200.1.3.1.11 | pwCepCfgMissingPktsToSes | 0 | 0 | pwCepCfgMissingPktsToSes OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The n… |
| 1.3.6.1.2.1.200.1.3.1.12 | pwCepCfgSesToUas | 0 | 0 | pwCepCfgSesToUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of… |
| 1.3.6.1.2.1.200.1.3.1.13 | pwCepCfgSecsToExitUas | 0 | 0 | pwCepCfgSecsToExitUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The numb… |
| 1.3.6.1.2.1.200.1.3.1.14 | pwCepCfgName | 0 | 0 | pwCepCfgName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This variable contains the n… |
| 1.3.6.1.2.1.200.1.3.1.15 | pwCepCfgRowStatus | 0 | 0 | pwCepCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and … |
| 1.3.6.1.2.1.200.1.3.1.16 | pwCepCfgStorageType | 0 | 0 | pwCepCfgStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the… |