On systems where the priority value in a syslog message
indicates the destination to which a syslog message
should be relayed, the value of this object will identify
the row in syslogRelayTable that contains
information about the relay destination to which
messages which have the priority value represented by
syslogPriorityFacility and syslogPrioritySeverity values
of this row will be relayed.
A value of 0 will indicate that there is no corresponding
row in the syslogRelayTable table.
pwCepCfgPktReorder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines if reordering is applied for incoming
packets.
If set \true\, as inbound packets are queued in the
jitter buffer, out-of-order packets are reordered. The
maximum sequence number differential (i.e., the range in
which resequencing can occur) is dependant on the depth
of the jitter buffer.
If the local agent supports packet reordering, the default
value SHOULD be set to \true\; otherwise, this value
SHOULD be set to \false\."
View at oid-info.com
On systems where the priority value in a syslog message
indicates the destination to which a syslog message
should be relayed, the value of this object will identify
the row in syslogRelayTable that contains
information about the relay destination to which
messages which have the priority value represented by
syslogPriorityFacility and syslogPrioritySeverity values
of this row will be relayed.
A value of 0 will indicate that there is no corresponding
row in the syslogRelayTable table.
syslogPriorityDestinationIndex OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "On systems where the priority value in a syslog message indicates the destination to which a syslog message should be relayed, the value of this object will identify the row in syslogRelayTable that contains information about the relay destination to which messages which have the priority value represented by syslogPriorityFacility and syslogPrioritySeverity values of this row will be relayed. A value of 0 will indicate that there is no corresponding row in the syslogRelayTable table." ::= { syslogPriorityEntry 4 }
Automatically extracted from RFC6240
syslogPriorityDestinationIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "On systems where the priority value in a syslog message indicates the destination to which a syslog message should be relayed, the value of this object will identify the row in syslogRelayTable that contains information about the relay destination to which messages which have the priority value represented by syslogPriorityFacility and syslogPrioritySeverity values of this row will be relayed. A value of 0 will indicate that there is no corresponding row in the syslogRelayTable table. " ::= { syslogPriorityEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.200.1.3.1.1 | pwCepCfgTableIndex, syslogPriorityFacility | 0 | 0 | The facility value of this entry. |
| 1.3.6.1.2.1.200.1.3.1.2 | pwCepSonetPayloadLength, syslogPrioritySeverity | 0 | 0 | The severity value of this entry. |
| 1.3.6.1.2.1.200.1.3.1.3 | pwCepCfgMinPktLength, syslogPriorityDescr | 0 | 0 | A textual description of this priority entry. |
| 1.3.6.1.2.1.200.1.3.1.5 | pwCepCfgEnableDBA, syslogPriorityStorageType | 0 | 0 | This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or are backed up… |
| 1.3.6.1.2.1.200.1.3.1.6 | pwCepCfgRtpHdrSuppress, syslogPriorityRowStatus | 0 | 0 | pwCepCfgRtpHdrSuppress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set t… |
| 1.3.6.1.2.1.200.1.3.1.7 | pwCepCfgJtrBfrDepth | 0 | 0 | pwCepCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "micro-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This… |
| 1.3.6.1.2.1.200.1.3.1.8 | pwCepCfgConsecPktsInsync | 0 | 0 | pwCepCfgConsecPktsInsync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive packets w… |
| 1.3.6.1.2.1.200.1.3.1.9 | pwCepCfgConsecMissingOutSync | 0 | 0 | pwCepCfgConsecMissingOutSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Consecutive missi… |
| 1.3.6.1.2.1.200.1.3.1.10 | pwCepCfgPktErrorPlayOutValue | 0 | 0 | pwCepCfgPktErrorPlayOutValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This obj… |
| 1.3.6.1.2.1.200.1.3.1.11 | pwCepCfgMissingPktsToSes | 0 | 0 | pwCepCfgMissingPktsToSes OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The n… |
| 1.3.6.1.2.1.200.1.3.1.12 | pwCepCfgSesToUas | 0 | 0 | pwCepCfgSesToUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of… |
| 1.3.6.1.2.1.200.1.3.1.13 | pwCepCfgSecsToExitUas | 0 | 0 | pwCepCfgSecsToExitUas OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The numb… |
| 1.3.6.1.2.1.200.1.3.1.14 | pwCepCfgName | 0 | 0 | pwCepCfgName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This variable contains the n… |
| 1.3.6.1.2.1.200.1.3.1.15 | pwCepCfgRowStatus | 0 | 0 | pwCepCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "For creating, modifying, and … |
| 1.3.6.1.2.1.200.1.3.1.16 | pwCepCfgStorageType | 0 | 0 | pwCepCfgStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the… |