mdmDTEActionDTROnToOff OBJECT-TYPE
SYNTAX INTEGER {
ignore(1),
escapeToCommandMode(2),
disconnectCall(3),
resetModem(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the action the modem will take when DTR drops.
If the value is set to ignore(1), the modem takes no action
when DTR drops. Typically, mdmDTEActionDTROfftoOn would
also be set to ignore(1) if this object is set to ignore(1).
If the value is escapeToCommandMode(2), the modem remains
connected and enters command mode. If the value is
disconnectCall(3), the current call (if any) is terminated
and the modem will not auto-answer while DTR is off. If the
value is resetModem(4), the current call (if any) is
terminated and the modem is reset."
DEFVAL { disconnectCall }
View at oid-info.com
Defines the action the modem will take when DTR drops.
If the value is set to ignore(1), the modem takes no action
when DTR drops. Typically, mdmDTEActionDTROffToOn would
also be set to ignore(1) if this object is set to ignore(1).
If the value is escapeToCommandMode(2), the modem remains
connected and enters command mode. If the value is
disconnectCall(3), the current call (if any) is terminated
and the modem will not auto-answer while DTR is off. If the
value is resetModem(4), the current call (if any) is
terminated and the modem is reset.
Parsed from file rfc1696.mib.txt
Company: lucent
Module: Modem-MIB
Automatically extracted from RFC1696
mdmDTEActionDTROnToOff OBJECT-TYPE SYNTAX INTEGER { ignore(1), escapeToCommandMode(2), disconnectCall(3), resetModem(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the action the modem will take when DTR drops. If the value is set to ignore(1), the modem takes no action when DTR drops. Typically, mdmDTEActionDTROffToOn would also be set to ignore(1) if this object is set to ignore(1). If the value is escapeToCommandMode(2), the modem remains connected and enters command mode. If the value is disconnectCall(3), the current call (if any) is terminated and the modem will not auto-answer while DTR is off. If the value is resetModem(4), the current call (if any) is terminated and the modem is reset." DEFVAL { disconnectCall } ::= { mdmDTEInterfaceEntry 1 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.38.1.6.1.2 | mdmDTEActionDTROffToOn | 0 | 0 | Defines the action the modem will take when DTR is raised. If the value is set to ignore(1), the modem takes no action when DTR i… |
1.3.6.1.2.1.38.1.6.1.3 | mdmDTESyncTimingSource | 0 | 0 | The clock source for synchronous transmissions. If set to internal(1), the modem is the clock source and sends the clock signals… |
1.3.6.1.2.1.38.1.6.1.4 | mdmDTESyncAsyncMode | 0 | 0 | The operational mode of the modem. If the value is syncAfterDial(3), the modem will accept commands in asynchronous mode and cha… |
1.3.6.1.2.1.38.1.6.1.5 | mdmDTEInactivityTimeout | 0 | 0 | The amount of idle time in minutes that the modem will wait before disconnecting a connection. When a call is connected and no d… |