mdmDTEActionDTROfftoOn OBJECT-TYPE
SYNTAX INTEGER {
ignore(1),
enableDial(2),
autoAnswerEnable(3),
establishConnection(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the action the modem will take when DTR is raised.
If the value is set to ignore(1), the modem takes no action
when DTR is raised. Typically, mdmDTEActionDTROnToOff would
also be set to ignore(1) if this object is set to ignore(1).
If the value is set to enableDial(2), the modem prepares to
dial an outgoing call. If the value is set to
autoAnswerEnable(3), the modem will be configured to answer
any incoming call. If the value is set to
establishConnection(4), the modem dials an implementation
specific number.
Immediately after any reset or power-on of the modem, if the
DTR is high, the action specified here will be executed."
DEFVAL { autoAnswerEnable }
View at oid-info.com
Defines the action the modem will take when DTR is raised.
If the value is set to ignore(1), the modem takes no action
when DTR is raised. Typically, mdmDTEActionDTROnToOff would
also be set to ignore(1) if this object is set to ignore(1).
If the value is set to enableDial(2), the modem prepares to
dial an outgoing call. If the value is set to
autoAnswerEnable(3), the modem will be configured to answer
any incoming call. If the value is set to
establishConnection(4), the modem dials an implementation
specific number.
Immediately after any reset or power-on of the modem, if the
DTR is high, the action specified here will be executed.
Parsed from file rfc1696.mib.txt
Company: lucent
Module: Modem-MIB
Automatically extracted from RFC1696
mdmDTEActionDTROffToOn OBJECT-TYPE SYNTAX INTEGER { ignore(1), enableDial(2), autoAnswerEnable(3), establishConnection(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the action the modem will take when DTR is raised. If the value is set to ignore(1), the modem takes no action when DTR is raised. Typically, mdmDTEActionDTROnToOff would also be set to ignore(1) if this object is set to ignore(1). If the value is set to enableDial(2), the modem prepares to dial an outgoing call. If the value is set to autoAnswerEnable(3), the modem will be configured to answer any incoming call. If the value is set to establishConnection(4), the modem dials an implementation specific number. Immediately after any reset or power-on of the modem, if the DTR is high, the action specified here will be executed." DEFVAL { autoAnswerEnable } ::= { mdmDTEInterfaceEntry 2 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.38.1.6.1.1 | mdmDTEActionDTROnToOff | 0 | 0 | Defines the action the modem will take when DTR drops. If the value is set to ignore(1), the modem takes no action when DTR drops… |
1.3.6.1.2.1.38.1.6.1.3 | mdmDTESyncTimingSource | 0 | 0 | The clock source for synchronous transmissions. If set to internal(1), the modem is the clock source and sends the clock signals… |
1.3.6.1.2.1.38.1.6.1.4 | mdmDTESyncAsyncMode | 0 | 0 | The operational mode of the modem. If the value is syncAfterDial(3), the modem will accept commands in asynchronous mode and cha… |
1.3.6.1.2.1.38.1.6.1.5 | mdmDTEInactivityTimeout | 0 | 0 | The amount of idle time in minutes that the modem will wait before disconnecting a connection. When a call is connected and no d… |