Reference record for OID 1.3.6.1.2.1.41.1.2.2.1.12



parent
1.3.6.1.2.1.41.1.2.2.1 (sdlcLSOperEntry)
node code
12
node name
sdlcLSOperRNRLIMIT
dot oid
1.3.6.1.2.1.41.1.2.2.1.12
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snaDLC(41) sdlc(1) sdlcLSGroup(2) sdlcLSOperTable(2) sdlcLSOperEntry(1) sdlcLSOperRNRLIMIT(12)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
  • /iso/identified-organization/dod/internet/mgmt/mib/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
  • /iso/org/dod/internet/mgmt/mib-2/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
  • /iso/org/dod/internet/mgmt/mib/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/snaDLC/sdlc/sdlcLSGroup/sdlcLSOperTable/sdlcLSOperEntry/sdlcLSOperRNRLIMIT
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/41/1/2/2/1/12

    Description by circitor

    This object reflects the current length of
    time (in 1/100ths of a second) that an SDLC
    link station will allow its adjacent link
    station to remain in a busy (RNR) state before
    declaring it inoperative.

    The object descriptor contains the name of an
    NCP configuration parameter, RNRLIMIT. Please
    note that the value of this object represents
    1/100ths of a second while the NCP RNRLIMIT is
    represented in minutes.

    A value of sdlcLSOperRNRLIMIT == 0 means there
    is no limit.

    Parsed from file SNA-SDLC-MIB.mib
    Module: SNA-SDLC-MIB

    Description by cisco_v1

    This object reflects the current length of
    time (in 1/100ths of a second) that an SDLC
    link station will allow its adjacent link
    station to remain in a busy (RNR) state before
    declaring it inoperative.

    The object descriptor contains the name of an
    NCP configuration parameter, RNRLIMIT. Please
    note that the value of this object represents
    1/100ths of a second while the NCP RNRLIMIT is
    represented in minutes.

    A value of sdlcLSOperRNRLIMIT == 0 means there
    is no limit.

    Description by oid_info

    sdlcLSOperRNRLIMIT OBJECT-TYPE
    SYNTAX TimeInterval
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "This object reflects the current length of
    time (in 1/100ths of a second) that an SDLC
    link station will allow its adjacent link
    station to remain in a busy (RNR) state before
    declaring it inoperative.
    The object descriptor contains the name of an
    NCP configuration parameter, RNRLIMIT. Please
    note that the value of this object represents
    1/100ths of a second while the NCP RNRLIMIT is
    represented in minutes.
    A value of sdlcLSOperRNRLIMIT == 0 means there
    is no limit."
    View at oid-info.com

    Description by mibdepot

    This object reflects the current length of
    time (in 1/100ths of a second) that an SDLC
    link station will allow its adjacent link
    station to remain in a busy (RNR) state before
    declaring it inoperative.

    The object descriptor contains the name of an
    NCP configuration parameter, RNRLIMIT. Please

    note that the value of this object represents
    1/100ths of a second while the NCP RNRLIMIT is
    represented in minutes.

    A value of sdlcLSOperRNRLIMIT == 0 means there
    is no limit.

    Parsed from file rfc1747-SNA-Data-Link-Control-SDLC.mib.txt
    Company: None
    Module: SNA-SDLC-MIB

    Description by cisco

    This object reflects the current length of
    time (in 1/100ths of a second) that an SDLC
    link station will allow its adjacent link
    station to remain in a busy (RNR) state before
    declaring it inoperative.

    The object descriptor contains the name of an
    NCP configuration parameter, RNRLIMIT. Please
    note that the value of this object represents
    1/100ths of a second while the NCP RNRLIMIT is
    represented in minutes.

    A value of sdlcLSOperRNRLIMIT == 0 means there
    is no limit.

    Information by circitor

    sdlcLSOperRNRLIMIT  OBJECT-TYPE
                    SYNTAX      TimeInterval
                    MAX-ACCESS  read-only
                    STATUS      current
                    DESCRIPTION
                        "This object reflects the current length of
                        time (in 1/100ths of a second) that an SDLC
                        link station will allow its adjacent link
                        station to remain in a busy (RNR) state before
                        declaring it inoperative.

                        The object descriptor contains the name of an
                        NCP configuration parameter, RNRLIMIT.  Please
                        note that the value of this object represents
                        1/100ths of a second while the NCP RNRLIMIT is
                        represented in minutes.

                        A value of sdlcLSOperRNRLIMIT == 0 means there
                        is no limit."
                    ::= { sdlcLSOperEntry 12 }

    Information by cisco_v1

    sdlcLSOperRNRLIMIT OBJECT-TYPE
    SYNTAX TimeInterval

    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object reflects the current length of
        time (in 1/100ths of a second) that an SDLC
        link station will allow its adjacent link
        station to remain in a busy (RNR) state before
        declaring it inoperative.
        
        The object descriptor contains the name of an
        NCP configuration parameter, RNRLIMIT.  Please
        note that the value of this object represents
        1/100ths of a second while the NCP RNRLIMIT is
        represented in minutes.
        
        A value of sdlcLSOperRNRLIMIT == 0 means there
        is no limit."
    ::= { sdlcLSOperEntry 12 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    sdlcLSOperRNRLIMIT  OBJECT-TYPE
                    SYNTAX      TimeInterval
                    MAX-ACCESS  read-only
                    STATUS      current
                    DESCRIPTION
                        "This object reflects the current length of
                        time (in 1/100ths of a second) that an SDLC
                        link station will allow its adjacent link
                        station to remain in a busy (RNR) state before
                        declaring it inoperative.

                        The object descriptor contains the name of an
                        NCP configuration parameter, RNRLIMIT.  Please

                        note that the value of this object represents
                        1/100ths of a second while the NCP RNRLIMIT is
                        represented in minutes.

                        A value of sdlcLSOperRNRLIMIT == 0 means there
                        is no limit."
                    ::= { sdlcLSOperEntry 12 }

    Information by cisco

    sdlcLSOperRNRLIMIT  OBJECT-TYPE
                    SYNTAX      TimeInterval
                    MAX-ACCESS  read-only
                    STATUS      current
                    DESCRIPTION
                        "This object reflects the current length of
                        time (in 1/100ths of a second) that an SDLC
                        link station will allow its adjacent link
                        station to remain in a busy (RNR) state before
                        declaring it inoperative.

                        The object descriptor contains the name of an
                        NCP configuration parameter, RNRLIMIT.  Please
                        note that the value of this object represents
                        1/100ths of a second while the NCP RNRLIMIT is
                        represented in minutes.

                        A value of sdlcLSOperRNRLIMIT == 0 means there
                        is no limit."
                    ::= { sdlcLSOperEntry 12 }

    First Registration Authority (recovered by parent 1.3.6.1.2.1.41)

    IETF SNA DLC MIB Working Group

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (23)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.41.1.2.2.1.1 sdlcLSOperName 0 0 An octet string that defines the name of the
    remote SDLC link station. This field is
    received in the XID3 control vector 0x0E, t…
    1.3.6.1.2.1.41.1.2.2.1.2 sdlcLSOperRole 0 0 This object reflects the current role that the
    link station is assuming.

    The value of sdlcLSOperRole is undefined(3)
    whenever the …
    1.3.6.1.2.1.41.1.2.2.1.3 sdlcLSOperState 0 0 This object describes the operational state of
    the SDLC link station. The managed system
    shall attempt to keep this value consis…
    1.3.6.1.2.1.41.1.2.2.1.4 sdlcLSOperMAXDATASend 0 0 This object contains the actual maximum PDU
    size that the local link station can send to
    the adjacent link station. This object …
    1.3.6.1.2.1.41.1.2.2.1.5 sdlcLSOperREPLYTO 0 0 This object reflects the current reply timeout
    (in 1/100ths of a second) for an SDLC link
    station. If the link station does not …
    1.3.6.1.2.1.41.1.2.2.1.6 sdlcLSOperMAXIN 0 0 This object reflects the current maximum
    number of unacknowledged I-frames which an SDLC
    link station may receive. This shall ra…
    1.3.6.1.2.1.41.1.2.2.1.7 sdlcLSOperMAXOUT 0 0 This object controls the maximum number of
    consecutive unacknowledged I-frames which an
    SDLC link station shall send without an
    ac…
    1.3.6.1.2.1.41.1.2.2.1.8 sdlcLSOperMODULO 0 0 This object reflects the current modulus for
    an SDLC link station. This modulus determines
    the size of rotating acknowledgement …
    1.3.6.1.2.1.41.1.2.2.1.9 sdlcLSOperRETRIESm 0 0 This object controls number of retries in a
    retry sequence for an SDLC link station. A
    retry sequence is a series of retransmitt…
    1.3.6.1.2.1.41.1.2.2.1.10 sdlcLSOperRETRIESt 0 0 This object reflects the current interval (in
    1/100ths of a second) between retry sequences
    for an SDLC link station if multiple …
    1.3.6.1.2.1.41.1.2.2.1.11 sdlcLSOperRETRIESn 0 0 This object reflects the current number of
    times that a retry sequence is repeated for an
    SDLC link station. A retry sequence is…
    1.3.6.1.2.1.41.1.2.2.1.13 sdlcLSOperDATMODE 0 0 This object reflects whether the current
    communications mode with the adjacent link
    station is two-way-alternate (half) or
    two-way…
    1.3.6.1.2.1.41.1.2.2.1.14 sdlcLSOperLastModifyTime 0 0 This object describes the value of sysUpTime
    when this link station definition was last
    modified. If the link station has not be…
    1.3.6.1.2.1.41.1.2.2.1.15 sdlcLSOperLastFailTime 0 0 This object describes the value of sysUpTime
    when this SDLC link station last failed. If
    the link station has not failed, then t…
    1.3.6.1.2.1.41.1.2.2.1.16 sdlcLSOperLastFailCause 0 0 This enumerated object reflects the cause of
    the last failure of this SDLC link station. If
    the link station has not failed, the…
    1.3.6.1.2.1.41.1.2.2.1.17 sdlcLSOperLastFailCtrlIn 0 0 This object reflects the last control octet or
    octets (depending on modulus) received by this
    SDLC link station at the time of th…
    1.3.6.1.2.1.41.1.2.2.1.18 sdlcLSOperLastFailCtrlOut 0 0 This object reflects the last control octet or
    octets (depending on modulus) sent by this SDLC
    link station at the time of the la…
    1.3.6.1.2.1.41.1.2.2.1.19 sdlcLSOperLastFailFRMRInfo 0 0 This object reflects the information field of
    the FRMR frame if the last failure for this
    SDLC link station was as a result of an…
    1.3.6.1.2.1.41.1.2.2.1.20 sdlcLSOperLastFailREPLYTOs 0 0 This object reflects the number of times that
    the REPLYTO timer had expired for an SDLC link
    station at the time of the last fail…
    1.3.6.1.2.1.41.1.2.2.1.21 sdlcLSOperEcho 0 0 This object identifies whether the echo bit is
    in effect for this particular link station.
    1.3.6.1.2.1.41.1.2.2.1.22 sdlcLSOperGPoll 0 0 This object describes the group poll address
    in effect for this link station instance.
    1.3.6.1.2.1.41.1.2.2.1.23 sdlcLSOperSimRim 0 0 This object reflects the support for
    transmission and receipt of SIM and RIM control
    frames for the adjacent link station. The
    va…
    1.3.6.1.2.1.41.1.2.2.1.24 sdlcLSOperXmitRcvCap 0 0 This object reflects the transmit-receive
    capabilities for the adjacent SDLC link
    station. The value of this object is the value…