This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command.
Parsed from file SNA-SDLC-MIB.mib
Module: SNA-SDLC-MIB
This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command.
sdlcLSOperRole OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2),
undefined(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command."
View at oid-info.com
This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command.
Parsed from file rfc1747-SNA-Data-Link-Control-SDLC.mib.txt
Company: None
Module: SNA-SDLC-MIB
This object reflects the current role that the
link station is assuming.
The value of sdlcLSOperRole is undefined(3)
whenever the link station role has not yet been
established by the mode setting command.
sdlcLSOperRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), undefined(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command." ::= { sdlcLSOperEntry 2 }
sdlcLSOperRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), undefined(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command." ::= { sdlcLSOperEntry 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sdlcLSOperRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), undefined(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command." ::= { sdlcLSOperEntry 2 }
sdlcLSOperRole OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2), undefined(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command." ::= { sdlcLSOperEntry 2 }
IETF SNA DLC MIB Working Group
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.41.1.2.2.1.1 | sdlcLSOperName | 0 | 0 | An octet string that defines the name of the remote SDLC link station. This field is received in the XID3 control vector 0x0E, t… |
| 1.3.6.1.2.1.41.1.2.2.1.3 | sdlcLSOperState | 0 | 0 | This object describes the operational state of the SDLC link station. The managed system shall attempt to keep this value consis… |
| 1.3.6.1.2.1.41.1.2.2.1.4 | sdlcLSOperMAXDATASend | 0 | 0 | This object contains the actual maximum PDU size that the local link station can send to the adjacent link station. This object … |
| 1.3.6.1.2.1.41.1.2.2.1.5 | sdlcLSOperREPLYTO | 0 | 0 | This object reflects the current reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not … |
| 1.3.6.1.2.1.41.1.2.2.1.6 | sdlcLSOperMAXIN | 0 | 0 | This object reflects the current maximum number of unacknowledged I-frames which an SDLC link station may receive. This shall ra… |
| 1.3.6.1.2.1.41.1.2.2.1.7 | sdlcLSOperMAXOUT | 0 | 0 | This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an ac… |
| 1.3.6.1.2.1.41.1.2.2.1.8 | sdlcLSOperMODULO | 0 | 0 | This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement … |
| 1.3.6.1.2.1.41.1.2.2.1.9 | sdlcLSOperRETRIESm | 0 | 0 | This object controls number of retries in a retry sequence for an SDLC link station. A retry sequence is a series of retransmitt… |
| 1.3.6.1.2.1.41.1.2.2.1.10 | sdlcLSOperRETRIESt | 0 | 0 | This object reflects the current interval (in 1/100ths of a second) between retry sequences for an SDLC link station if multiple … |
| 1.3.6.1.2.1.41.1.2.2.1.11 | sdlcLSOperRETRIESn | 0 | 0 | This object reflects the current number of times that a retry sequence is repeated for an SDLC link station. A retry sequence is… |
| 1.3.6.1.2.1.41.1.2.2.1.12 | sdlcLSOperRNRLIMIT | 0 | 0 | This object reflects the current length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link s… |
| 1.3.6.1.2.1.41.1.2.2.1.13 | sdlcLSOperDATMODE | 0 | 0 | This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-way… |
| 1.3.6.1.2.1.41.1.2.2.1.14 | sdlcLSOperLastModifyTime | 0 | 0 | This object describes the value of sysUpTime when this link station definition was last modified. If the link station has not be… |
| 1.3.6.1.2.1.41.1.2.2.1.15 | sdlcLSOperLastFailTime | 0 | 0 | This object describes the value of sysUpTime when this SDLC link station last failed. If the link station has not failed, then t… |
| 1.3.6.1.2.1.41.1.2.2.1.16 | sdlcLSOperLastFailCause | 0 | 0 | This enumerated object reflects the cause of the last failure of this SDLC link station. If the link station has not failed, the… |
| 1.3.6.1.2.1.41.1.2.2.1.17 | sdlcLSOperLastFailCtrlIn | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) received by this SDLC link station at the time of th… |
| 1.3.6.1.2.1.41.1.2.2.1.18 | sdlcLSOperLastFailCtrlOut | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) sent by this SDLC link station at the time of the la… |
| 1.3.6.1.2.1.41.1.2.2.1.19 | sdlcLSOperLastFailFRMRInfo | 0 | 0 | This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of an… |
| 1.3.6.1.2.1.41.1.2.2.1.20 | sdlcLSOperLastFailREPLYTOs | 0 | 0 | This object reflects the number of times that the REPLYTO timer had expired for an SDLC link station at the time of the last fail… |
| 1.3.6.1.2.1.41.1.2.2.1.21 | sdlcLSOperEcho | 0 | 0 | This object identifies whether the echo bit is in effect for this particular link station. |
| 1.3.6.1.2.1.41.1.2.2.1.22 | sdlcLSOperGPoll | 0 | 0 | This object describes the group poll address in effect for this link station instance. |
| 1.3.6.1.2.1.41.1.2.2.1.23 | sdlcLSOperSimRim | 0 | 0 | This object reflects the support for transmission and receipt of SIM and RIM control frames for the adjacent link station. The va… |
| 1.3.6.1.2.1.41.1.2.2.1.24 | sdlcLSOperXmitRcvCap | 0 | 0 | This object reflects the transmit-receive capabilities for the adjacent SDLC link station. The value of this object is the value… |