This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange.
Parsed from file SNA-SDLC-MIB.mib
Module: SNA-SDLC-MIB
This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange.
sdlcLSOperMAXOUT OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange."
View at oid-info.com
This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange.
Parsed from file rfc1747-SNA-Data-Link-Control-SDLC.mib.txt
Company: None
Module: SNA-SDLC-MIB
This object controls the maximum number of
consecutive unacknowledged I-frames which an
SDLC link station shall send without an
acknowledgement. This shall range from 1 to
(sdlcLSAdminMODULO - 1).
This value may controlled by the administered
MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value
received during the XID exchange.
sdlcLSOperMAXOUT OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). This value may controlled by the administered MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value received during the XID exchange." ::= { sdlcLSOperEntry 7 }
sdlcLSOperMAXOUT OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-only STATUS mandatory DESCRIPTION "This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). This value may controlled by the administered MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value received during the XID exchange." ::= { sdlcLSOperEntry 7 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sdlcLSOperMAXOUT OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). This value may controlled by the administered MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value received during the XID exchange." ::= { sdlcLSOperEntry 7 }
sdlcLSOperMAXOUT OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). This value may controlled by the administered MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value received during the XID exchange." ::= { sdlcLSOperEntry 7 }
IETF SNA DLC MIB Working Group
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.41.1.2.2.1.1 | sdlcLSOperName | 0 | 0 | An octet string that defines the name of the remote SDLC link station. This field is received in the XID3 control vector 0x0E, t… |
1.3.6.1.2.1.41.1.2.2.1.2 | sdlcLSOperRole | 0 | 0 | This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the … |
1.3.6.1.2.1.41.1.2.2.1.3 | sdlcLSOperState | 0 | 0 | This object describes the operational state of the SDLC link station. The managed system shall attempt to keep this value consis… |
1.3.6.1.2.1.41.1.2.2.1.4 | sdlcLSOperMAXDATASend | 0 | 0 | This object contains the actual maximum PDU size that the local link station can send to the adjacent link station. This object … |
1.3.6.1.2.1.41.1.2.2.1.5 | sdlcLSOperREPLYTO | 0 | 0 | This object reflects the current reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not … |
1.3.6.1.2.1.41.1.2.2.1.6 | sdlcLSOperMAXIN | 0 | 0 | This object reflects the current maximum number of unacknowledged I-frames which an SDLC link station may receive. This shall ra… |
1.3.6.1.2.1.41.1.2.2.1.8 | sdlcLSOperMODULO | 0 | 0 | This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement … |
1.3.6.1.2.1.41.1.2.2.1.9 | sdlcLSOperRETRIESm | 0 | 0 | This object controls number of retries in a retry sequence for an SDLC link station. A retry sequence is a series of retransmitt… |
1.3.6.1.2.1.41.1.2.2.1.10 | sdlcLSOperRETRIESt | 0 | 0 | This object reflects the current interval (in 1/100ths of a second) between retry sequences for an SDLC link station if multiple … |
1.3.6.1.2.1.41.1.2.2.1.11 | sdlcLSOperRETRIESn | 0 | 0 | This object reflects the current number of times that a retry sequence is repeated for an SDLC link station. A retry sequence is… |
1.3.6.1.2.1.41.1.2.2.1.12 | sdlcLSOperRNRLIMIT | 0 | 0 | This object reflects the current length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link s… |
1.3.6.1.2.1.41.1.2.2.1.13 | sdlcLSOperDATMODE | 0 | 0 | This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-way… |
1.3.6.1.2.1.41.1.2.2.1.14 | sdlcLSOperLastModifyTime | 0 | 0 | This object describes the value of sysUpTime when this link station definition was last modified. If the link station has not be… |
1.3.6.1.2.1.41.1.2.2.1.15 | sdlcLSOperLastFailTime | 0 | 0 | This object describes the value of sysUpTime when this SDLC link station last failed. If the link station has not failed, then t… |
1.3.6.1.2.1.41.1.2.2.1.16 | sdlcLSOperLastFailCause | 0 | 0 | This enumerated object reflects the cause of the last failure of this SDLC link station. If the link station has not failed, the… |
1.3.6.1.2.1.41.1.2.2.1.17 | sdlcLSOperLastFailCtrlIn | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) received by this SDLC link station at the time of th… |
1.3.6.1.2.1.41.1.2.2.1.18 | sdlcLSOperLastFailCtrlOut | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) sent by this SDLC link station at the time of the la… |
1.3.6.1.2.1.41.1.2.2.1.19 | sdlcLSOperLastFailFRMRInfo | 0 | 0 | This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of an… |
1.3.6.1.2.1.41.1.2.2.1.20 | sdlcLSOperLastFailREPLYTOs | 0 | 0 | This object reflects the number of times that the REPLYTO timer had expired for an SDLC link station at the time of the last fail… |
1.3.6.1.2.1.41.1.2.2.1.21 | sdlcLSOperEcho | 0 | 0 | This object identifies whether the echo bit is in effect for this particular link station. |
1.3.6.1.2.1.41.1.2.2.1.22 | sdlcLSOperGPoll | 0 | 0 | This object describes the group poll address in effect for this link station instance. |
1.3.6.1.2.1.41.1.2.2.1.23 | sdlcLSOperSimRim | 0 | 0 | This object reflects the support for transmission and receipt of SIM and RIM control frames for the adjacent link station. The va… |
1.3.6.1.2.1.41.1.2.2.1.24 | sdlcLSOperXmitRcvCap | 0 | 0 | This object reflects the transmit-receive capabilities for the adjacent SDLC link station. The value of this object is the value… |