See textual convention PrtAlertTrainingLevelTC
Parsed from file Printer-MIB.mib
Module: Printer-MIB
See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC.
NOTE: The above description has been modified from RFC 1759
for clarification.
prtAlertTrainingLevel OBJECT-TYPE
-- This value is a type 2 enumeration
SYNTAX INTEGER {
other(1),
unknown(2),
untrained(3),
trained(4),
fieldService(5),
management(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level of training required to handle this alert. The
training level is an enumeration that is determined and
assigned by the printer manufacturer based on the information
or the training required to handle this alert. The printer
will break alerts into these different training levels. It is
the responsibility of the management application in the system
to determine how a particular alert is handled and how and to
whom that alert is routed. The following are the four
training levels of alerts:
Field Service - Alerts that typically require advanced
training and technical knowledge of the printer
and its sub-units. An example of a technical
person would be a manufactures Field Service
representative, or other person formally
trained by the manufacturer or similar
representative.
Trained - Alerts that require an intermediate or moderate
level of knowledge of the printer and its
sub-units. A typical examples of alerts that
a trained operator can handle is replacing
toner cartridges.
Untrained - Alerts that can be fixed without prior
training either because the action to correct
the alert is obvious or the printer can help the
untrained person fix the problem. A typical
example of such an alert is reloading paper
trays and emptying output bins on a low end
printer.
Management - Alerts that have to do with overall
operation of and configuration of the printer.
Examples of management events are configuration
change of sub-units."
View at oid-info.com
The level of training required to handle this alert. The
training level is an enumeration that is determined and
assigned by the printer manufacturer based on the information
or the training required to handle this alert. The printer
will break alerts into these different training levels. It is
the responsibility of the management application in the system
to determine how a particular alert is handled and how and to
whom that alert is routed. The following are the four
training levels of alerts:
Field Service - Alerts that typically require advanced
training and technical knowledge of the printer
and its sub-units. An example of a technical
person would be a manufacture's Field Service
representative, or other person formally
trained by the manufacturer or similar
representative.
Trained - Alerts that require an intermediate or moderate
level of knowledge of the printer and its
sub-units. A typical examples of alerts that
a trained operator can handle is replacing
toner cartridges.
Untrained - Alerts that can be fixed without prior
training either because the action to correct
the alert is obvious or the printer can help the
untrained person fix the problem. A typical
example of such an alert is reloading paper
trays and emptying output bins on a low end
printer.
Management - Alerts that have to do with overall
operation of and configuration of the printer.
Examples of management events are configuration
change of sub-units.
Parsed from file rfc1759.mib.txt
Company: None
Module: Printer-MIB
See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC.
NOTE: The above description has been modified from RFC 1759
for clarification.
prtAlertTrainingLevel OBJECT-TYPE SYNTAX PrtAlertTrainingLevelTC MAX-ACCESS read-only STATUS current DESCRIPTION "See textual convention PrtAlertTrainingLevelTC" ::= { prtAlertEntry 3 }
prtAlertTrainingLevel OBJECT-TYPE SYNTAX PrtAlertTrainingLevelTC ACCESS read-only STATUS mandatory DESCRIPTION "See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC. NOTE: The above description has been modified from RFC 1759 for clarification." ::= { prtAlertEntry 3 }
Automatically extracted from RFC1759
prtAlertTrainingLevel OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), untrained(3), trained(4), fieldService(5), management(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The level of training required to handle this alert. The training level is an enumeration that is determined and assigned by the printer manufacturer based on the information or the training required to handle this alert. The printer will break alerts into these different training levels. It is the responsibility of the management application in the system to determine how a particular alert is handled and how and to whom that alert is routed. The following are the four training levels of alerts: Field Service - Alerts that typically require advanced training and technical knowledge of the printer and its sub-units. An example of a technical person would be a manufacture's Field Service representative, or other person formally trained by the manufacturer or similar representative. Trained - Alerts that require an intermediate or moderate level of knowledge of the printer and its sub-units. A typical examples of alerts that a trained operator can handle is replacing toner cartridges. Untrained - Alerts that can be fixed without prior training either because the action to correct the alert is obvious or the printer can help the untrained person fix the problem. A typical example of such an alert is reloading paper trays and emptying output bins on a low end printer. Management - Alerts that have to do with overall operation of and configuration of the printer. Examples of management events are configuration change of sub-units." ::= { prtAlertEntry 3 }
prtAlertTrainingLevel OBJECT-TYPE SYNTAX PrtAlertTrainingLevelTC MAX-ACCESS read-only STATUS current DESCRIPTION "See TEXTUAL-CONVENTION PrtAlertTrainingLevelTC. NOTE: The above description has been modified from RFC 1759 for clarification." ::= { prtAlertEntry 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.43.18.1.1.1 | prtAlertIndex | 0 | 0 | The index value used to determine which alerts have been added or removed from the alert table. This is an incrementing integer s… |
1.3.6.1.2.1.43.18.1.1.2 | prtAlertSeverityLevel | 0 | 0 | The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. |
1.3.6.1.2.1.43.18.1.1.4 | prtAlertGroup | 0 | 0 | The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer mode… |
1.3.6.1.2.1.43.18.1.1.5 | prtAlertGroupIndex | 0 | 0 | An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the print… |
1.3.6.1.2.1.43.18.1.1.6 | prtAlertLocation | 0 | 0 | The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designa… |
1.3.6.1.2.1.43.18.1.1.7 | prtAlertCode | 0 | 0 | See associated textual convention PrtAlertCodeTC |
1.3.6.1.2.1.43.18.1.1.8 | prtAlertDescription | 0 | 0 | A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by… |
1.3.6.1.2.1.43.18.1.1.9 | prtAlertTime | 0 | 0 | The value of sysUpTime at the time that this alert was generated. |