Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
traceRouteCtlEntry.
Refer to the corresponding traceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry.
Parsed from file DISMAN-TRACEROUTE-MIB.mib
Module: DISMAN-TRACEROUTE-MIB
traceRouteCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER {
enabled(1), -- operation should be started
disabled(2) -- operation should be stopped
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
traceRouteCtlEntry.
Refer to the corresponding traceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry."
DEFVAL { disabled }
View at oid-info.com
Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
traceRouteCtlEntry.
Refer to the corresponding traceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry.
Parsed from file DISMAN-TRACEROUTE-MIB.txt
Company: None
Module: DISMAN-TRACEROUTE-MIB
Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
traceRouteCtlEntry.
Refer to the corresponding traceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry.
traceRouteCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2) - Deactivate the test as defined by this traceRouteCtlEntry. Refer to the corresponding traceRouteResultsOperStatus to determine the operational state of the test defined by this entry." DEFVAL { disabled } ::= { traceRouteCtlEntry 21 }
Automatically extracted from RFC2925
traceRouteCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2) - Deactivate the test as defined by this traceRouteCtlEntry. Refer to the corresponding traceRouteResultsOperStatus to determine the operational state of the test defined by this entry." DEFVAL { disabled } ::= { traceRouteCtlEntry 21 }
traceRouteCtlAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this traceRouteCtlEntry. disabled(2) - Deactivate the test as defined by this traceRouteCtlEntry. Refer to the corresponding traceRouteResultsOperStatus to determine the operational state of the test defined by this entry." DEFVAL { disabled } ::= { traceRouteCtlEntry 21 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.81.1.2.1.1 | traceRouteCtlOwnerIndex | 0 | 0 | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 3415,… |
1.3.6.1.2.1.81.1.2.1.2 | traceRouteCtlTestName | 0 | 0 | The name of a traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex. |
1.3.6.1.2.1.81.1.2.1.3 | traceRouteCtlTargetAddressType | 0 | 0 | Specifies the type of host address to be used on the traceroute request at the remote host. |
1.3.6.1.2.1.81.1.2.1.4 | traceRouteCtlTargetAddress | 0 | 0 | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by examinin… |
1.3.6.1.2.1.81.1.2.1.5 | traceRouteCtlByPassRouteTable | 0 | 0 | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal… |
1.3.6.1.2.1.81.1.2.1.6 | traceRouteCtlDataSize | 0 | 0 | Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by enc… |
1.3.6.1.2.1.81.1.2.1.7 | traceRouteCtlTimeOut | 0 | 0 | Specifies the time-out value, in seconds, for a traceroute request. |
1.3.6.1.2.1.81.1.2.1.8 | traceRouteCtlProbesPerHop | 0 | 0 | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
1.3.6.1.2.1.81.1.2.1.9 | traceRouteCtlPort | 0 | 0 | Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) … |
1.3.6.1.2.1.81.1.2.1.10 | traceRouteCtlMaxTtl | 0 | 0 | Specifies the maximum time-to-live value. |
1.3.6.1.2.1.81.1.2.1.11 | traceRouteCtlDSField | 0 | 0 | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe.… |
1.3.6.1.2.1.81.1.2.1.12 | traceRouteCtlSourceAddressType | 0 | 0 | Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute op… |
1.3.6.1.2.1.81.1.2.1.13 | traceRouteCtlSourceAddress | 0 | 0 | Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packet… |
1.3.6.1.2.1.81.1.2.1.14 | traceRouteCtlIfIndex | 0 | 0 | Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be… |
1.3.6.1.2.1.81.1.2.1.15 | traceRouteCtlMiscOptions | 0 | 0 | Enables an application to specify implementation dependent options. |
1.3.6.1.2.1.81.1.2.1.16 | traceRouteCtlMaxFailures | 0 | 0 | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute requ… |
1.3.6.1.2.1.81.1.2.1.17 | traceRouteCtlDontFragment | 0 | 0 | This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing … |
1.3.6.1.2.1.81.1.2.1.18 | traceRouteCtlInitialTtl | 0 | 0 | The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion o… |
1.3.6.1.2.1.81.1.2.1.19 | traceRouteCtlFrequency | 0 | 0 | The number of seconds to wait before repeating a traceroute test, as defined by the value of the various objects in the correspon… |
1.3.6.1.2.1.81.1.2.1.20 | traceRouteCtlStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
1.3.6.1.2.1.81.1.2.1.22 | traceRouteCtlDescr | 0 | 0 | The purpose of this object is to provide a descriptive name of the remote traceroute test. |
1.3.6.1.2.1.81.1.2.1.23 | traceRouteCtlMaxRows | 0 | 0 | The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest e… |
1.3.6.1.2.1.81.1.2.1.24 | traceRouteCtlTrapGeneration | 0 | 0 | The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a trac… |
1.3.6.1.2.1.81.1.2.1.25 | traceRouteCtlCreateHopsEntries | 0 | 0 | The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is tru… |
1.3.6.1.2.1.81.1.2.1.26 | traceRouteCtlType | 0 | 0 | The value of this object is used either to report or select the implementation method to be used for performing a traceroute oper… |
1.3.6.1.2.1.81.1.2.1.27 | traceRouteCtlRowStatus | 0 | 0 | This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in al… |