The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the traceroute operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed).
Parsed from file DISMAN-TRACEROUTE-MIB.mib
Module: DISMAN-TRACEROUTE-MIB
traceRouteCtlByPassRouteTable OBJECT-TYPE SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the traceroute operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed)."
DEFVAL { false }
View at oid-info.com
The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the traceroute operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed).
Parsed from file DISMAN-TRACEROUTE-MIB.txt
Company: None
Module: DISMAN-TRACEROUTE-MIB
The purpose of this object is to enable optional
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly attached network, an
error is returned. This option can be used to perform
the traceroute operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by the routing daemon at the host).
traceRouteCtlByPassRouteTable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed)." DEFVAL { false } ::= { traceRouteCtlEntry 5 }
Automatically extracted from RFC2925
traceRouteCtlByPassRouteTable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by routed)." DEFVAL { false } ::= { traceRouteCtlEntry 5 }
traceRouteCtlByPassRouteTable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned. This option can be used to perform the traceroute operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by the routing daemon at the host)." DEFVAL { false } ::= { traceRouteCtlEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.81.1.2.1.1 | traceRouteCtlOwnerIndex | 0 | 0 | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 3415,… |
| 1.3.6.1.2.1.81.1.2.1.2 | traceRouteCtlTestName | 0 | 0 | The name of a traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex. |
| 1.3.6.1.2.1.81.1.2.1.3 | traceRouteCtlTargetAddressType | 0 | 0 | Specifies the type of host address to be used on the traceroute request at the remote host. |
| 1.3.6.1.2.1.81.1.2.1.4 | traceRouteCtlTargetAddress | 0 | 0 | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by examinin… |
| 1.3.6.1.2.1.81.1.2.1.6 | traceRouteCtlDataSize | 0 | 0 | Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by enc… |
| 1.3.6.1.2.1.81.1.2.1.7 | traceRouteCtlTimeOut | 0 | 0 | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.2.1.81.1.2.1.8 | traceRouteCtlProbesPerHop | 0 | 0 | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
| 1.3.6.1.2.1.81.1.2.1.9 | traceRouteCtlPort | 0 | 0 | Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) … |
| 1.3.6.1.2.1.81.1.2.1.10 | traceRouteCtlMaxTtl | 0 | 0 | Specifies the maximum time-to-live value. |
| 1.3.6.1.2.1.81.1.2.1.11 | traceRouteCtlDSField | 0 | 0 | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe.… |
| 1.3.6.1.2.1.81.1.2.1.12 | traceRouteCtlSourceAddressType | 0 | 0 | Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute op… |
| 1.3.6.1.2.1.81.1.2.1.13 | traceRouteCtlSourceAddress | 0 | 0 | Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packet… |
| 1.3.6.1.2.1.81.1.2.1.14 | traceRouteCtlIfIndex | 0 | 0 | Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be… |
| 1.3.6.1.2.1.81.1.2.1.15 | traceRouteCtlMiscOptions | 0 | 0 | Enables an application to specify implementation dependent options. |
| 1.3.6.1.2.1.81.1.2.1.16 | traceRouteCtlMaxFailures | 0 | 0 | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute requ… |
| 1.3.6.1.2.1.81.1.2.1.17 | traceRouteCtlDontFragment | 0 | 0 | This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing … |
| 1.3.6.1.2.1.81.1.2.1.18 | traceRouteCtlInitialTtl | 0 | 0 | The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion o… |
| 1.3.6.1.2.1.81.1.2.1.19 | traceRouteCtlFrequency | 0 | 0 | The number of seconds to wait before repeating a traceroute test, as defined by the value of the various objects in the correspon… |
| 1.3.6.1.2.1.81.1.2.1.20 | traceRouteCtlStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.2.1.81.1.2.1.21 | traceRouteCtlAdminStatus | 0 | 0 | Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this … |
| 1.3.6.1.2.1.81.1.2.1.22 | traceRouteCtlDescr | 0 | 0 | The purpose of this object is to provide a descriptive name of the remote traceroute test. |
| 1.3.6.1.2.1.81.1.2.1.23 | traceRouteCtlMaxRows | 0 | 0 | The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest e… |
| 1.3.6.1.2.1.81.1.2.1.24 | traceRouteCtlTrapGeneration | 0 | 0 | The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a trac… |
| 1.3.6.1.2.1.81.1.2.1.25 | traceRouteCtlCreateHopsEntries | 0 | 0 | The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is tru… |
| 1.3.6.1.2.1.81.1.2.1.26 | traceRouteCtlType | 0 | 0 | The value of this object is used either to report or select the implementation method to be used for performing a traceroute oper… |
| 1.3.6.1.2.1.81.1.2.1.27 | traceRouteCtlRowStatus | 0 | 0 | This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in al… |