The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow the addition
of an new entry once the number of rows in the
traceRouteProbeHistoryTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
traceRouteProbeHistoryTable entries.
Parsed from file DISMAN-TRACEROUTE-MIB.mib
Module: DISMAN-TRACEROUTE-MIB
traceRouteCtlMaxRows OBJECT-TYPE SYNTAX Unsigned32
UNITS "rows"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow the addition
of an new entry once the number of rows in the
traceRouteProbeHistoryTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
traceRouteProbeHistoryTable entries."
DEFVAL { 50 }
View at oid-info.com
The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow the addition
of an new entry once the number of rows in the
traceRouteProbeHistoryTable reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
traceRouteProbeHistoryTable entries.
Parsed from file DISMAN-TRACEROUTE-MIB.txt
Company: None
Module: DISMAN-TRACEROUTE-MIB
The maximum number of corresponding entries allowed
in the traceRouteProbeHistoryTable. An implementation
of this MIB will remove the oldest corresponding entry
in the traceRouteProbeHistoryTable to allow the
addition of an new entry once the number of
corresponding rows in the traceRouteProbeHistoryTable
reaches this value.
Old entries are not removed when a new test is
started. Entries are added to the
traceRouteProbeHistoryTable until traceRouteCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
traceRouteProbeHistoryTable entries.
traceRouteCtlMaxRows OBJECT-TYPE SYNTAX Unsigned32 UNITS "rows" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow the addition of an new entry once the number of rows in the traceRouteProbeHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the traceRouteProbeHistoryTable until traceRouteCtlMaxRows is reached before entries begin to be removed. A value of 0 for this object disables creation of traceRouteProbeHistoryTable entries." DEFVAL { 50 } ::= { traceRouteCtlEntry 23 }
Automatically extracted from RFC2925
traceRouteCtlMaxRows OBJECT-TYPE SYNTAX Unsigned32 UNITS "rows" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow the addition of an new entry once the number of rows in the traceRouteProbeHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the traceRouteProbeHistoryTable until traceRouteCtlMaxRows is reached before entries begin to be removed. A value of 0 for this object disables creation of traceRouteProbeHistoryTable entries." DEFVAL { 50 } ::= { traceRouteCtlEntry 23 }
traceRouteCtlMaxRows OBJECT-TYPE SYNTAX Unsigned32 UNITS "rows" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of corresponding entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest corresponding entry in the traceRouteProbeHistoryTable to allow the addition of an new entry once the number of corresponding rows in the traceRouteProbeHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the traceRouteProbeHistoryTable until traceRouteCtlMaxRows is reached before entries begin to be removed. A value of 0 for this object disables creation of traceRouteProbeHistoryTable entries." DEFVAL { 50 } ::= { traceRouteCtlEntry 23 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.81.1.2.1.1 | traceRouteCtlOwnerIndex | 0 | 0 | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 3415,… |
| 1.3.6.1.2.1.81.1.2.1.2 | traceRouteCtlTestName | 0 | 0 | The name of a traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex. |
| 1.3.6.1.2.1.81.1.2.1.3 | traceRouteCtlTargetAddressType | 0 | 0 | Specifies the type of host address to be used on the traceroute request at the remote host. |
| 1.3.6.1.2.1.81.1.2.1.4 | traceRouteCtlTargetAddress | 0 | 0 | Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by examinin… |
| 1.3.6.1.2.1.81.1.2.1.5 | traceRouteCtlByPassRouteTable | 0 | 0 | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal… |
| 1.3.6.1.2.1.81.1.2.1.6 | traceRouteCtlDataSize | 0 | 0 | Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by enc… |
| 1.3.6.1.2.1.81.1.2.1.7 | traceRouteCtlTimeOut | 0 | 0 | Specifies the time-out value, in seconds, for a traceroute request. |
| 1.3.6.1.2.1.81.1.2.1.8 | traceRouteCtlProbesPerHop | 0 | 0 | Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value. |
| 1.3.6.1.2.1.81.1.2.1.9 | traceRouteCtlPort | 0 | 0 | Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) … |
| 1.3.6.1.2.1.81.1.2.1.10 | traceRouteCtlMaxTtl | 0 | 0 | Specifies the maximum time-to-live value. |
| 1.3.6.1.2.1.81.1.2.1.11 | traceRouteCtlDSField | 0 | 0 | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe.… |
| 1.3.6.1.2.1.81.1.2.1.12 | traceRouteCtlSourceAddressType | 0 | 0 | Specifies the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute op… |
| 1.3.6.1.2.1.81.1.2.1.13 | traceRouteCtlSourceAddress | 0 | 0 | Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packet… |
| 1.3.6.1.2.1.81.1.2.1.14 | traceRouteCtlIfIndex | 0 | 0 | Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be… |
| 1.3.6.1.2.1.81.1.2.1.15 | traceRouteCtlMiscOptions | 0 | 0 | Enables an application to specify implementation dependent options. |
| 1.3.6.1.2.1.81.1.2.1.16 | traceRouteCtlMaxFailures | 0 | 0 | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute requ… |
| 1.3.6.1.2.1.81.1.2.1.17 | traceRouteCtlDontFragment | 0 | 0 | This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing … |
| 1.3.6.1.2.1.81.1.2.1.18 | traceRouteCtlInitialTtl | 0 | 0 | The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion o… |
| 1.3.6.1.2.1.81.1.2.1.19 | traceRouteCtlFrequency | 0 | 0 | The number of seconds to wait before repeating a traceroute test, as defined by the value of the various objects in the correspon… |
| 1.3.6.1.2.1.81.1.2.1.20 | traceRouteCtlStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.2.1.81.1.2.1.21 | traceRouteCtlAdminStatus | 0 | 0 | Reflects the desired state that an traceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this … |
| 1.3.6.1.2.1.81.1.2.1.22 | traceRouteCtlDescr | 0 | 0 | The purpose of this object is to provide a descriptive name of the remote traceroute test. |
| 1.3.6.1.2.1.81.1.2.1.24 | traceRouteCtlTrapGeneration | 0 | 0 | The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a trac… |
| 1.3.6.1.2.1.81.1.2.1.25 | traceRouteCtlCreateHopsEntries | 0 | 0 | The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is tru… |
| 1.3.6.1.2.1.81.1.2.1.26 | traceRouteCtlType | 0 | 0 | The value of this object is used either to report or select the implementation method to be used for performing a traceroute oper… |
| 1.3.6.1.2.1.81.1.2.1.27 | traceRouteCtlRowStatus | 0 | 0 | This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in al… |