If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted.
mplsTunnelTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted."
DEFVAL { false }
View at oid-info.com
The mplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these attributes are in addition
to those specified in mplsTunnelResourceTable. This
table also allows several tunnels to point to a
single entry in this table, implying that these
tunnels should share resources.
Parsed from file mpls-te.mib.txt
Company: None
Module: MPLS-TE-MIB
If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted.
mplsTunnelTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsTeObjects 10 }
mplsTunnelTrapEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsTeObjects 10 }
Automatically extracted from Cisco "SNMP v2 MIBs".
mplsTunnelCRLDPResTable OBJECT-TYPE SYNTAX SEQUENCE OF MplsTunnelCRLDPResEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mplsTunnelCRLDPResTable allows a manager to specify which CR-LDP-specific resources are desired for an MPLS tunnel if that tunnel is signaled using CR-LDP. Note that these attributes are in addition to those specified in mplsTunnelResourceTable. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources." ::= { mplsTeObjects 10 }
mplsTunnelTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted." DEFVAL { false } ::= { mplsTeObjects 10 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.95.2.10.0 | mplsTunnelTrapEnable | 0 | 0 | None |
| 1.3.6.1.3.95.2.10.1 | mplsTunnelCRLDPResEntry | 7 | 7 | An entry in this table represents a set of resources for an MPLS tunnel established using CRLDP (mplsTunnelSignallingProto equal … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.95.2.0 | mplsTeNotifyPrefix | 4 | 4 | None |
| 1.3.6.1.3.95.2.1 | mplsTunnelIndexNext | 1 | 1 | This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in mplsTunnelTable. If the … |
| 1.3.6.1.3.95.2.2 | mplsTunnelTable | 1 | 38 | The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconf… |
| 1.3.6.1.3.95.2.3 | mplsTunnelHopListIndexNext | 1 | 1 | This object contains an appropriate value to be used for mplsTunnelHopListIndex when creating entries in the mplsTunnelHopTable. … |
| 1.3.6.1.3.95.2.4 | mplsTunnelHopTable | 1 | 17 | The mplsTunnelHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, when it is e… |
| 1.3.6.1.3.95.2.5 | mplsTunnelResourceIndexNext | 1 | 1 | This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelRes… |
| 1.3.6.1.3.95.2.6 | mplsTunnelResourceTable | 1 | 11 | The mplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows s… |
| 1.3.6.1.3.95.2.7 | mplsTunnelARHopTable | 1 | 10 | The mplsTunnelARHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as reporte… |
| 1.3.6.1.3.95.2.8 | mplsTunnelCHopTable | 1 | 10 | The mplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as computed… |
| 1.3.6.1.3.95.2.9 | mplsTunnelPerfTable | 1 | 6 | This table provides per-tunnel MPLS performance information. |
| 1.3.6.1.3.95.2.11 | 11 | 1 | 1 | mplsTunnelTrapEnable |