This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR
is unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first
issue a management protocol retrieval operation to
obtain the current value of this object. The agent
should modify the value to reflect the next
unassigned index after each retrieval operation.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR
is unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first
issue a management protocol retrieval operation to
obtain the current value of this object. The agent
should modify the value to reflect the next
unassigned index after each retrieval operation.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.
mplsTunnelResourceIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR
is unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first
issue a management protocol retrieval operation to
obtain the current value of this object. The agent
should modify the value to reflect the next
unassigned index after each retrieval operation.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse."
View at oid-info.com
This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR is
unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first issue
a management protocol retrieval operation to obtain
the current value of this object. The agent should
modify the value to reflect the next unassigned
index after each retrieval operation. After a
manager retrieves a value the agent will determine
through its local policy when this index value will
be made available for reuse.
Parsed from file mpls-te.mib.txt
Company: None
Module: MPLS-TE-MIB
This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR
is unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first
issue a management protocol retrieval operation to
obtain the current value of this object. The agent
should modify the value to reflect the next
unassigned index after each retrieval operation.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.
mplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the mplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsTeObjects 5 }
mplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Gauge(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the mplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsTeObjects 5 }
Automatically extracted from Cisco "SNMP v2 MIBs".
mplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0.. 2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the mplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsTeObjects 5 }
mplsTunnelResourceIndexNext OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the mplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse." ::= { mplsTeObjects 5 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.95.2.5.0 | mplsTunnelResourceIndexNext | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.95.2.0 | mplsTeNotifyPrefix | 4 | 4 | None |
1.3.6.1.3.95.2.1 | mplsTunnelIndexNext | 1 | 1 | This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in mplsTunnelTable. If the … |
1.3.6.1.3.95.2.2 | mplsTunnelTable | 1 | 38 | The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconf… |
1.3.6.1.3.95.2.3 | mplsTunnelHopListIndexNext | 1 | 1 | This object contains an appropriate value to be used for mplsTunnelHopListIndex when creating entries in the mplsTunnelHopTable. … |
1.3.6.1.3.95.2.4 | mplsTunnelHopTable | 1 | 17 | The mplsTunnelHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, when it is e… |
1.3.6.1.3.95.2.6 | mplsTunnelResourceTable | 1 | 11 | The mplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows s… |
1.3.6.1.3.95.2.7 | mplsTunnelARHopTable | 1 | 10 | The mplsTunnelARHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as reporte… |
1.3.6.1.3.95.2.8 | mplsTunnelCHopTable | 1 | 10 | The mplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as computed… |
1.3.6.1.3.95.2.9 | mplsTunnelPerfTable | 1 | 6 | This table provides per-tunnel MPLS performance information. |
1.3.6.1.3.95.2.10 | mplsTunnelTrapEnable, mplsTunnelCRLDPResTable | 2 | 9 | If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not em… |
1.3.6.1.3.95.2.11 | 11 | 1 | 1 | mplsTunnelTrapEnable |