OID reference

commPortProtocol

1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5

Description

<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of t…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.2.1.3.23.2.1 (commPortsEntry)
Node code
5
Node name
commPortProtocol
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5
URN notation
urn:oid:1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 3 23 2 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) unit(3) commPorts(23) commPortTable(2) commPortsEntry(1) commPortProtocol(5)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/2/1/3/23/2/1/5
  • /ISO/Identified-Organization/6/1/4/1/1206/4/2/1/3/23/2/1/5
  • /ISO/3/6/1/4/1/1206/4/2/1/3/23/2/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • /iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/unit/commPorts/commPortTable/commPortsEntry/commPortProtocol
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Allowed ranges
0–32

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: ifIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

commPortProtocol · mandatory

commPortProtocol OBJECT-TYPE
      SYNTAX INTEGER (0..32)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object specifies the protocol to be used
            on the communication port. If the port is disabled by means other
            than commPortEnable or has not yet been initialized, then the
            protocol shall be zero (0); otherwise the value shall be set to
            n+1 where n is the bit number within commPortProtocolsSupported
            of the protocol desired. Note that one can only choose from the
            set of protocols supported on that port; all other values will
            return a badValue response.



                                                                                            

                  
        

      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5"
::= { commPortsEntry 5 }

commPortProtocol · mandatory

commPortProtocol OBJECT-TYPE
      SYNTAX INTEGER (0..32)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object specifies the protocol to be used
            on the communication port. If the port is disabled by means other
            than commPortEnable or has not yet been initialized, then the
            protocol shall be zero (0); otherwise the value shall be set to
            n+1 where n is the bit number within commPortProtocolsSupported
            of the protocol desired. Note that one can only choose from the
            set of protocols supported on that port; all other values will
            return a badValue response.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5
      <Object Type> P"
::= { commPortsEntry 5 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5 <Object Type> P

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

commPortProtocol · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: commPortProtocol

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "commPortProtocol",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "32",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5\"",
    "::=",
    "{",
    "commPortsEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            32
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

commPortProtocol · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: commPortProtocol

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "commPortProtocol",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "32",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5 <Object Type> P\"",
    "::=",
    "{",
    "commPortsEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            32
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object specifies the protocol to be used on the communication port. If the port is disabled by means other than commPortEnable or has not yet been initialized, then the protocol shall be zero (0); otherwise the value shall be set to n+1 where n is the bit number within commPortProtocolsSupported of the protocol desired. Note that one can only choose from the set of protocols supported on that port; all other values will return a badValue response. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.23.2.1.5 <Object Type> P"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.1 commPortType00
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.2 commPortTypeIndex00
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.3 commPortEnable00
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.4 commPortProtocolsSupported00
1.3.6.1.4.1.1206.4.2.1.3.23.2.1.6 commPortDiagnostics00