Status in source: deprecated.
Names: auxIOv2PortValue
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"auxIOv2PortValue",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition>For input or bidirectional ports, this contains the current value of the input. For output ports, this is the last commanded value of the port. A genError shall be generated, if this object is set and the port is an input. The actual value exchanged shall not exceed [2^(auxIOv2PortResolution): 1]; any SET operation to a value in excess of this number shall result in a genErr, and any GET response in excess of this value shall be considered erroneous. <Superseded by> FIELD-DEVICE-GPIO-MIB.fdGPIOPortValue (ISO 20684-2) <Informative> The original specification defined this parameter using INTEGER (0..4294967295); however, by convention, INTEGERs are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32-bit integer, thereby allowing sensors to report negative values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.5\"",
"::=",
"{",
"auxIOv2Entry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition>For input or bidirectional ports, this contains the current value of the input. For output ports, this is the last commanded value of the port. A genError shall be generated, if this object is set and the port is an input. The actual value exchanged shall not exceed [2^(auxIOv2PortResolution): 1]; any SET operation to a value in excess of this number shall result in a genErr, and any GET response in excess of this value shall be considered erroneous. <Superseded by> FIELD-DEVICE-GPIO-MIB.fdGPIOPortValue (ISO 20684-2) <Informative> The original specification defined this parameter using INTEGER (0..4294967295); however, by convention, INTEGERs are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32-bit integer, thereby allowing sensors to report negative values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.5"
],
null,
null,
null,
null
]
}